Flush Diaphragm

The Pressure Sensors can be used where a recessed diaphragm is not wanted (possibly due to the volume, or viscosity of media), or designed to sit flush to the inside of the vessel wall. Various designs are available either in small sizes down to M4 thread, Ultra miniature O’ring sealed or versions which can be bonded in the application. Most sensors within this range are suitable for high dynamic frequency investigations and available in mV or amplified outputs.

Please wait, loading results...

Flush Diaphragm

PPB Miniature Pressure Sensor

Miniature, high frequency response

  • Ranges from 0.3 to 350 bar gauge or abs
  • Output mV
  • Linearity up to ±0.5% FS
  • Stainless steel construction

PM5 Miniature Thread Pressure Sensor

Miniature, dynamic response pressure sensor

  • Ranges 1 to 350 bar gauge, sg, abs
  • Output mV or 0.5 to 4.5V
  • Linearity up to ±0.25% FS
  • Titanium construction

PM10C Miniature Thread Pressure Sensor

Miniature, dynamic response pressure sensor

  • Ranges 1 to 350 bar gauge, sg, abs
  • Output 4-20mA, mV or voltage
  • Linearity up to ±0.5% FS
  • Stainless Steel construction

PKHT High Temperature Miniature

Miniature pressure sensor for high temperature

  • Ranges 10 to 350 bar gauge, sg, abs
  • Output 0-10mV
  • Linearity ±0.25% FS
  • -50 to 220 Deg C operating

PM6 Miniature Pressure Sensor

Miniature pressure sensor

  • Ranges 20 to 1000 bar gauge, sg, abs
  • Output mV, 0.5 to 5V
  • Linearity ±0.25% FS
  • Stainless steel construction

PFD121 flush miniature pressure sensor

Miniature flush diaphragm pressure sensor

  • Ranges 0-15 to 0-700 bar gauge
  • Outputs mV
  • Accuracy 0.50% FS
  • High bandwidth

EPB-PW Pore Water Sensor

Pore water pressure sensor

  • Ranges 0-1 to 0-70 bar gauge or abs
  • Output to 100mV
  • Accuracy 0.25% FS
  • Ceramic stones or bronze filters

Load More
x
Loading