Universal

A range of universal force sensors.

  1. CB14

    CB14

    • 100kg to 300kg
    • Single point load cell for platform weighing
    • IOML certified

    CB14

    100kg to 300kg
    Single point load cell for platform weighing
    IOML certified

  2. Six Axis Loadcell

    Six Axis Loadcell

    Model: FN 7325
    • 6 component load cell
    • 5 to 250KN range
    • mV or amplified output
    • -20° to 80°C range
    • 3 axis force & torque

    Six Axis Loadcell

    The multiaxial FN7325 measures force from 0-5  KN to 0-250 KN along three axes as well as the corresponding torque from 0-200 Nm to 0-7000 Nm. The FN7325 is simple to use and install and in many diverse applications circumvents the necessity of employing multiple single-axes units. 

  3. T3B1

    T3B1

    • 100kg to 5te
    • Universal S-beam
    • High accuracy
    • General purpose

    T3B1

    High accuracy universal S-beam loadcell with easy installation.  Excellent side-load rejection.

  4. ELHS

    ELHS

    • Tension or compression
    • 2.5KN to 50KN range
    • 200mV FSO
    • -20° to 80°C range
    • High resolution

    ELHS

    The ELHS load cell is a compact package able to fit into many applications where others cannot. The low noise Wheatstone bridge consists of piezoresistive strain gauges which provide 200 mV of typical full scale output. When compact design, extreme stiffness and superior resolution are required, the ELHS load cell is the sensor for your application. The ELHS is provided with either SAE or metric threads for tension and compression applications.

  5. ELFF

    ELFF

    • Tension or compression
    • 10-100 lbf range
    • mV or amplifed output
    • -40° to 120°C range
    • NIST calibration

    ELFF

    The ELFF unit is fully thermally compensated and will provide an essentially unlimited cycle life expectancy. The ELFF can be configured with a variety of options to fine tune the instrument to your application: select from several standard package geometries, compensated temperature ranges, input voltages, lead lengths or specify entirely unique combinations of these options.

  6. ELHM

    ELHM

    • Tension or compression
    • 2.5KN to 50KN range
    • 2mV/V output
    • -50° to 120°C range
    • High stability

    ELHM

    The ELHM load cell is a compact package able to fit into many applications where others cannot. When compact design and superior stability are required, the ELHM load cell is the sensor for your application.

  7. ELPF

    ELPF

    • Tension or compression
    • 10-500lbf range
    • mV or amplified output
    • -40° to 120°C range
    • IP 65 rating

    ELPF

    ELPF series of sensors, unlike most competitive designs, are provided with a "four-bar" design where a flexible diaphragm parallels the measuring flexure. This configuration is far less susceptible to off-axis load components than single diaphragm traditional designs. Shielded, Teflon insulated instrumentation cabling is provided along with spring steel strain reliefs and full NIST traceable calibration certificates. The ELPF unit is fully thermally compensated and will provide an essentially unlimited cycle life expectancy. The ELPF can be configured with a variety of options to fine-tune the instrument to your application: select from several standard package geometries, compensated temperature ranges, input voltages, lead lengths or specify entirely unique combinations of these options.

  8. Compression Cell

    Compression Cell

    • Low height
    • Stainless steel
    • Sealed to IP68
    • Compression load cell
    • Integral load button
    • Welded cover

    Compression Cell

    Compact robust load cell that lends itself to retrofit, research, test and development applications. Available in non-standard sizes, capacities, shunt calibrations and temperature compensations. Integral load button to remove side loading inaccuracy.

  9. Button Cell

    Button Cell

    • Ranges from 500N to 20KN
    • Compact low profile
    • Accuracy <0.25%
    • Repeatability <0.1%
    • Sealed to IP65
    • Integral load button

    Button Cell

    Compact robust load cell that lends itself to research, test and development applications. Available in non-standard sizes, capacities, shunt calibrations and temperature compensations. Integral load button to remove side loading inaccuracy.

  10. Stainless Tension Link

    Stainless Tension Link

    • Ranges from 1.5 to 150 tonne
    • Accuracy <0.1%
    • Robust Stainless steel construction
    • Sealed to IP68 (submersible)
    • ATEX version available
    • Safe overload to 300%

    Stainless Tension Link

    High quality stainless steel tension link for a multitude of lifting and pulling applications in many sectors including automotive, marine, construction, military and power.
    Variety of options available, plug and socket, second redundancy for critical application. Integral amplifier, 2 wire and 3 wire and ATEX. Carry case for ease of transportation and storage.  Wireless version also available; see wireless link.

  11. Tension Cell

    Tension Cell

    • Ranges from 0.1kN to 20kN
    • Tension and compression
    • Accuracy <0.25%
    • Repeatability <0.01%
    • Sealed to IP65
    • Integral male threads

    Tension Cell

    Compact design lends itself to inline measuring and retro-fitting applications. Measurement in both tension and compression makes this a particularly versatile load cell. Integral male threads or rod end bearings for mechanical mounting. High natural frequency for fast response dynamic applications. Non-standard sizes and ranges available on request, as well as cable length and shunt calibrations. 

  12. Load Pin

    Load Pin

    • Ranges from 0.1 to 1400 tonne
    • Accuracy <±1%
    • Sealed to IP68 (submersible)
    • Stainless steel construction
    • Replacement to clevis/pivot pins
    • ATEX version available

    Load Pin

    Load measuring shear pin can be used in many retrofit and new installations to provide force monitoring/feedback. Internal gauging provide maximum protection from physical abuse and wear. Options include submersible, internal amplifiers, dual redundancy bridge, plug and socket breakdown, internal greasy ways and anti rotation/locking plates.

  13. TR150 Load Cell Battery Powered Handheld Indicator

    TR150 Load Cell Battery Powered Handheld Indicator

    • Portable/battery powered
    • 7 digit display
    • Robust construction
    • IP65
    • Compatible with most strain sensors

    TR150 Load Cell Battery Powered Handheld Indicator

    The TR150 transducer readout is a completely portable, precision instrument packaged in a small handheld IP65 enclosure, weighing only 260 grams. 

    This device accepts a strain gauges load cell or pressure transducer with a output of between 0.75mV/V and 7.5mV/V at full range.

  14. Low Profile - Aluminium

    Low Profile - Aluminium

    • Ranges from 500N to 200kN
    • Tension and compression
    • Accuracy <0.1%
    • Sealed to IP65
    • Fatigue rated to 100 million cycles
    • High natural frequency

    Low Profile - Aluminium

    Low profile pancake load cell is designed for high cyclic fatigue test. It exhibits excellent characteristic of low deflection, high natural frequency and rejection of extraneous force. Combined with options including body mounted or inline amplification, dual redundancy bridge and a range of mounting options like pull plates. It is an excellent load cell for test bed applications.

  15. Low Profile - Stainless Steel

    Low Profile - Stainless Steel

    • Ranges from 5kN to 1000kN
    • Tension and compression
    • Accuracy <0.1%
    • Sealed to IP65
    • Fatigue rated to 100 million cycles
    • High natural frequency

    Low Profile - Stainless Steel

    Low profile pancake load cell is designed for high cyclic fatigue test. It exhibits excellent characteristic of low deflection, high natural frequency and rejection of extraneous force. Combined with options including body mounted or inline amplification, dual redundancy bridge, ATEX versions and a range of mounting options like pull plates. It is an excellent load cell for test bed applications.

  16. Low Range S Type Load Cell

    Low Range S Type Load Cell

    • Ranges from 10kg to 100kg
    • High accuracy <0.03%
    • Tension and compression
    • Bolt on covers
    • Sealed to IP67 (submersible)
    • Safe overload to 150%

    Low Range S Type Load Cell

    Inherently high accuracy design can measure both tensions and compression loads. Threaded mounting points for easy installation of eye-bolts or compression fittings. Fully temperature compensated.

  17. S Type Load Cell

    S Type Load Cell

    • Ranges from 250kg to 20,000kg
    • High Accuracy <0.03%
    • Tension and compression
    • Stainless steel fully welded
    • Sealed to IP68 (submersible)
    • Safe overload to 150%

    S Type Load Cell

    Inherently high accuracy design can measure both tensions and compression loads. Threaded mounting points for easy installation of eye-bolts or compression fittings. Fully temperature compensated.

  18. Marine Shackle

    Marine Shackle

    • Range 6.5te to 250te
    • Sealed to IP66
    • Stainless steel pin and bobbin
    • Ideal for direct swap installation
    • Robust construction
    • ATEX certification

    Marine Shackle

  19. Shear Beam Load Cell

    Shear Beam Load Cell

    • Welded covers
    • Stainless steel
    • Sealed to IP68
    • ATEX certification available
    • High accuracy
    • Integral mounting base

    Shear Beam Load Cell

  20. Wireless Aluminium Tension Link

    Wireless Aluminium Tension Link

    • Ranges from 1 to 500 tonne
    • Accuracy <0.1%
    • Transmission range 200m
    • Complete with handheld display
    • Battery life 150 hours
    • Sealed to IP67

    Wireless Aluminium Tension Link

    High quality stainless steel tension link for a multitude of lifting and pulling applications in sectors including automotive, marine, construction, military, power production and many more. Auto power down and long life lithium battery provides up to 150 hours continuous use. Up to 255 links can be used in any one installation without interference. Complete with carry case for both the link and handheld display.

  21. Aluminium Tension Link

    Aluminium Tension Link

    • Range 1 to 500 tonne
    • For use with standard shackle
    • Sealed to IP66
    • Integral electrical connector
    • Robust construction
    • Low weight

    Aluminium Tension Link

    High quality aluminium tension link for a multitude of lifting and pulling application in sectors including automotive, marine, construction, military, power production and many more.
    Variety of options available, plug and socket, second redundancy for critical application. Integral amplifier, 2 wire and 3 wire and ATEX. Carry case for ease of transportation and storage.  Wireless version also available; see wireless link.

  22. FN3000

    FN3000

    • Heavy duty load cell
    • Tension & compression
    • -20° to 80°C range
    • mV or amplified output
    • High IP protection

    FN3000

    The FN3000 measures tension and compression in standard ranges from 0-10 KN to 0-1000 KN. The mechanical design and gauge placement minimizes transverse effects. Depending on the range, the FN3000 is constructed in aluminium alloy or stainless steel and is available with numerous options. It is suitable for test bench applications and used in many hostile environments and can be customized for increased protection.

  23. FN3148

    FN3148

    • Tension & compression
    • 10-2000N range
    • mV or amplified output
    • -20 to 80°C range
    • High accuracy

    FN3148

    The FN3148 high precision load cell features accuracy of 0.05% F.S. Integrated mechanical stops protect against accidental overloads in tension and compression.

  24. XFTC300

    XFTC300

    • Tension & compression
    • 0-2N to 0-2KN range
    • mV or amplified output
    • -40° to 120°C  range
    • Heavy duty, miniature

    XFTC300

    The XFTC300 series has been specifically developed to measure tension and/or compression in static and dynamic applications. The miniature size and light weight facilitate testing where these conditions are necessary. The sensing element is fitted with a fully temperature compensated Wheatstone bridge equipped with high stability micro-machined silicon strain gauges. The use of silicon strain gauges optimizes the load cell’s performance at low ranges and frequencies. For sensors with a range of between 2 and 2KN, a high-level output model is available. With two male threads, the XFTC300 is easily installed in industrial or OEM applications. A strain relief spring strengthens the cable output.

  25. FN3002

    FN3002

    • Tension or compression
    • 10KN to 2000KN
    • mV or amplified output
    • -20° to 80°C range
    • High IP protection

    FN3002

    The FN3002 is suitable for measuring cable tension and for use in test benches and in many industrial applications. The FN3002 with its compact dimensions measures tension and compression in standard ranges from 10 KN to 2,000 KN [2 to 400 klbf]. Numerous options are available for adaptation to severe environments, for example IP67 or IP68 protection. 

  26. FN1010

    FN1010

    • Load pin design
    • 10 to 2000 KN
    • mV or amplified output
    • -20° to 80°C range
    • Bidirectional version

    FN1010

    Model FN1010 is designed to fit in the place of the regular mounting unit. The implantation is facilitated by the possibility of modifying a certain number of dimensions. The FN1010 is suitable for numerous applications on lifting motors and handling equipment. The load pins can be used to measure forces on rotating components (pulleys, sheaves, etc.) and can be directly mounted on shackle.

  27. FN3030

    FN3030

    • Tension or compression
    • 50 to 100KN range
    • mV or amplified output
    • -20° to 80°C range
    • S beam load cell

    FN3030

    The FN3030 is well suited for customization in industrial applications and protection levels can be upgraded for use in hostile environments.

  28. FN3060

    FN3060

    • Tension & compression
    • 250 to 2500N range
    • mV or amplified output
    • -20° to 80°C range
    • 0.1% F.S. accuracy

    FN3060

    The FN3060 S-beam load cell is highly suited for use in test benches and fatigue tests. Due to the mechanical design, the FN3060 is especially durable. It measures tension and compression in standard ranges from 0-250 to 0-2500 N [50 to 500 lbf].

  29. FN3280

    FN3280

    • Tension and compression
    • 1 to 5N range
    • mV output
    • -20° to 80°C temp range
    • Mechanical overstops

    FN3280

    The FN3280 S-beam load cell is designed to measure low force and has standard ranges of 1 to 5 N[0.2 to 1 lbf]. Integrated mechanical stops protect against accidental overloads up to 100 times F.S. The FN3280 provides a combination of economy and performance, this low cost load cell has an accuracy of 0.1% F.S.

  30. FN7110

    FN7110

    • Tension & compression
    • 10/100N to 1KN/10KN
    • mV or amplified
    • -20° to 80°C range
    • Double range load cell

    FN7110

    The FN7110 features high accuracy measurement channels in two ranges in the same load cell. The standard ratio between the ranges is 1 to 10, and standard load range combinations go from 0-10 and 0-100 N through 0-1000 and 0-10,000 N. The FN7110's percentage accuracy is the same over each range in the load cell. In practice one maintains accuracy of 0.1% over the high force range even in the first 10% of F.S.

  31. FN3050

    FN3050

    • Tension and compression
    • 100 to 20KN range
    • mV or amplified output
    • -20° to 80°C range
    • 0.1% F.S. accuracy

    FN3050

    The rugged FN3050 load cell is highly suited for the process industry and test bench applications. Dimensions are identical in standard ranges from 0-100 to 0-20,000 N so during testing the sensor can be interchanged for another of a different range without mechanical modifications. 

  32. FN3042

    FN3042

    • Tension & compression 
    • 5-500KN range
    • mV or amplified output
    • -20° to 80°C range
    • Fatigue and crash test

    FN3042

    The FN3042 is highly suited for use in test benches and fatigue tests. Due to the mechanical design, the FN3042 is especially durable. It measures tension and compression in standard ranges from 5 KN to 500 KN and is able to undergo more than 1,000,000 cycles of full scale with very little change in zero offset stability.