Triaxial MEMS DC Accelerometers

Our range of Triaxial MEMS DC Accelerometers. Our experts are available to offer technical support, call 01908 543038 or email sales@strainsense.co.uk

  1. Model EGAXT3 Accelerometer

    Model EGAXT3 Accelerometer

    Model: EGAXT3
    • Miniature Triaxial Design
    • DC Response, Critically Damped
    • 10,000 g Over-range Stops
    • Broad Temperature Range

    Model EGAXT3 Accelerometer

    The Model EGAXT3 miniature triaxial accelerometer combines a damping ratio of 0.7 (Nominal) with built-in over-range stops that are set to protect the unit against 10,000g shocks. This is ideal for applications which may experience rough handling or in situations where the accelerometer must survive a high initial overload in order to make a low g measurement.

    Our Technical Sales Team is available to help with the selection of our Model EGAXT3 Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  2. Miniature Triaxial Accelerometer

    Miniature Triaxial Accelerometer

    Model: 53
    • 0-2000g range
    • -20 to 85°C range
    • mV output
    • Up to 4500Hz
    • Crash testing

    Miniature Triaxial Accelerometer

    The Model 53 accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. This sensor is easily mounted in hard to reach places on vehicles under test using adhesive mounting.

  3. 63 Accelerometer

    63 Accelerometer

    Model: 63
    • 0-2000g range
    • -20 to 85°C range
    • mV output
    • Up to 3000Hz
    • Miniature

    63 Accelerometer

    The Model 63 accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications.

  4. Model 4630 Accelerometer

    Model 4630 Accelerometer

    Model: 4630
    • MEMS Triaxial Accelerometer
    • DC Response, Ultra-Stable
    • Accurate Temp Compensation
    • Signal Conditioned Output
    • 5,000g Over-Range Protection

    Model 4630 Accelerometer

    The Model 4630 is an ultra-stable triaxial accelerometer offering both static and dynamic response. The silicon MEMS accelerometer incorporates integral temperature compensation that provides a stable output over a wide operating range. The three independent circuit assemblies have independent signal conditioning and can operate on common or separate power supplies. The advanced MEMS sensing elements are gas damped in order to provide a wide stable frequency response.

    Our Technical Sales Team is available to help with the selection of our Model 4630 Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  5. Model 4203 Accelerometer

    Model 4203 Accelerometer

    Model: 4203
    • Triaxial Motorsport Accelerometer
    • Critically Gas Damped
    • Temperature Compensation
    • EMI/RFI Protection
    • Custom 8-Pole LP Filters

    Model 4203 Accelerometer

    The Model 4203 is a triaxial motorsport accelerometer designed for harsh installations. The rugged, gas damped accelerometer is ideally tailored for motorsport applications and road vehicle testing. The model 4203 features an 8-pole low-pass filter to ensure no high frequency engine noise will leak into the passband. A heavy-duty shielded cable and an EMI/RFI module protects the accelerometer from the harsh operating environment. Available in ranges from ±6g to ±50g, the model 4203 will provide reliable measurements from -40°C to +125°C.

    Our Technical Sales Team is available to help with the selection of our Model 4203 Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  6. Seat Pad ISO 10362-1

    Seat Pad ISO 10362-1

    Model: 606M1
    • 0-25g range
    • -20 to 85°C range
    • mV output
    • Up to 1000Hz
    • Seat pad triaxial

    Seat Pad ISO 10362-1

    The Model 606M1 is a MEMS triaxial seat pad accelerometer with both static and dynamic responses designed specially for characterising whole body vibration in accordance with ISO 2631-1 and ISO 8041. The DC response of the silicon MEMS sensors is the key to yield accurate velocity and displacement results from the raw acceleration data. The Dynamic range of this model is +/- 25g.

  7. Model 4332M3 Accelerometer

    Model 4332M3 Accelerometer

    Model: 4332M3
    • 4-20mA Signal Output
    • MEMS Triaxial Accelerometer
    • IP68 Protection
    • Low Noise, High Resolution

    Model 4332M3 Accelerometer

    The Model 4332M3 is 4-20mA output MEMS triaxial accelerometer offering both static and dynamic response. The accelerometer is packaged in a corrosion resistant stainless steel housing and is offered in ±2g to ±20g range. The model 4332M3 features an integral cable and is certified to IP68 protection up to 40m depth with an operating temperature range of -40°C to +85°C.

    Our Technical Sales Team is available to help with the selection of our Model 4332M3 Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.