Test & Measurement Accelerometer
We offer a full range of sensors for component testing for various industries.
-
52M30
- 0-2000g range
- -40 to 90°C range
- mV output
- Up to 7000Hz
- NIST calibration
52M30
The Model 52M30 accelerometer has an advanced piezoresistive MEMS sensing element which offers excellent dynamic range and stability. This unit features a full bridge output.
-
64B
- 0-6000g range
- 0 to 50°C range
- mV output
- Up to 7000Hz
- J211 triaxial accelerometer
64B
The Model 64B accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit features a full bridge output configuration.
-
64C
- 0-6000g range
- 0 to 50°C range
- mV output
- Up to 7000Hz
- Auto safety accelerometer
64C
The Model 64C accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit is ideal for impact crash testing.
-
3801A
- 0-2000g range
- -55 to 125°C range
- mV output
- Up to 4000Hz
- MEMS sensor
3801A
The Model 3801A is an mV output piezoresistive accelerometer in a rugged hermetic package. The accelerometer incorporates mechanical stops for over-range protection up to 10,000g.
-
4600 / 4602
- 0-500g range
- -55 to 125°C range
- Amplified output
- Up to 1500Hz
- Gas damped
4600 / 4602
The Model 4600 & 4602 are designed for both static and dynamic measurements in critical and demanding applications.
-
53/53A
- 0-2000g range
- -20 to 85°C range
- mV output
- Up to 4500Hz
- Crash testing
53/53A
The Model 53 accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. This sensor is easily mounted in hard to reach places on vehicles under test.
-
606M1
- 0-25g range
- -20 to 85°C range
- mV output
- Up to 1000Hz
- Seat pad triaxial
606M1
The Model 606M1 is a MEMS triaxial seat pad accelerometer with both static and dynamic responses designed specially for characterising whole body vibration in accordance with ISO 2631-1 and ISO 8041. The DC response of the silicon MEMS sensors is the key to yield accurate velocity and displacement results from the raw acceleration data.
-
7100A
- 0-500g range
- -55 to 150°C range
- V output
- Up to 15KHz
- TEDS compliance
7100A
The Model 7100A is a high performance IEPE accelerometer and is hermetically sealed and features the popular through hole mount installation for use with standard mounting screws.
-
7101A
- 0-100g range
- -55 to 125°C range
- V output
- Up to 10KHz
- Miniature
7101A
The accelerometer is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >10kHz utilizing stable piezo-ceramic crystals in annular shear mode. The model 7101A features a hermetically sealed titanium housing and the popular through hole mount configuration.
-
7132A
- 0-2000g range
- -55 to 125°C range
- V output
- Up to 12000Hz
- Miniature triaxial
7132A
The Model 7132A features a hermetically sealed titanium construction with a 4-pin Microtech connector interface. The model 7132A incorporates stable piezo-ceramic crystals in annular shear mode which provide a flat frequency response up to >12kHz.
-
7120A
- 0-500g range
- -55 to 100°C range
- V output
- Up to 7000Hz
- Miniature IEPE
7120A
The Model 7120A is a high performance IEPE accelerometer designed for modal applications.
-
7500A
- 0-3500g range
- -73 to 260°C range
- IEPE
- Up to 15000Hz
- Through hole mount
7500A
The Model 7500A is a piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. The accelerometer incorporates an annular shear mode crystal that provides stable thermal response up to +260°C.
-
7501A
- 0-4000g range
- -73°C to 260°C range
- 5.6pC/g output
- Up to 10kHz
- Charge output accelerometer
7501A
The Model 7501A is a miniature piezoelectric charge mode accelerometer with a very high temperature range.
-
7502A
- 0-5000g range
- -73 to 260°C range
- IEPE
- Up to 14000Hz
- Titanium housing
7502A
The Model 7502A is a miniature piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. The accelerometer incorporates an annular shear mode crystal that provides stable thermal response.
-
7514A
- 0-2000g range
- -73 to 260°C range
- IEPE
- Up to 14KHz
- Miniature IEPE
7514A
The Model 7514A is a stud mounted piezoelectric charge mode accelerometer. The accelerometer is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >14kHz with a nominal charge output of 50pC/g.
-
7202A
- 0-500g range
- -55 to 130°C range
- V output
- Up to 15KHz
- Ideal for HUMS
7202A
The Model 7202A is a case isolated high temperature IEPE accelerometer with internal shielding. The accelerometer has a flat bandwidth up to 15kHz with a resonant frequency greater than 40kHz.
-
64
- 0-6000g range
- -40 to 121°C range
- mV output
- Up to 7000Hz
- J211 triaxial accelerometer
64
The Model 64 accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit features a full bridge output configuration with temperature compensation.
-
1201
- 0-1000g range
- -0 to 50°C range
- mV output
- Up to 3000Hz
- Adhesive mount
1201
The Model 1201 accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. This sensor is easily mounted in hard to get places on vehicles under test.
-
3700
- 0-6000g range
- -55 to 125°C range
- mV output
- Up to 6000Hz
- Gas damped
3700
The Model 3700 is a MEMS piezoresistive shock accelerometer in a rugged stainless steel package. The accelerometer is ideal for long duration shock transient measurements. It incorporates mechanical over-range stops and is packaged in an industry standard footprint.
-
63
- 0-2000g range
- -20 to 85°C range
- mV output
- Up to 3000Hz
- Miniature
63
The Model 63 accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications.
-
4630
- 0-500g range
- -55 to 125°C range
- Amplified output
- Up to 2000Hz
- Signal conditioned
4630
The Model 4630 is a low noise triaxial accelerometer offering both static and dynamic response. The piezoresistive accelerometer incorporates integral temperature compensation that provides a stable output over a wide operating range. The three independent circuit assemblies are hermetically sealed and can operate on common or separate power supplies. The advanced MEMS sensing elements are gas damped in order to provide a wide stable frequency response.
-
4203
- 0-30g range
- -40 to 85°C range
- Amplified output
- Up to 60Hz
- EMI/ RFI protection
4203
The Model 4203 triaxial accelerometer is designed with performance and reliability in mind. The rugged piezoresistive MEMS sensing element comes straight from our world renowned crash test accelerometers. The internal ASIC amplifier originally designed for missile applications performs sensitivity and zero compensation 20 times per second over its operating temperature.
-
8011
- 0.5 to 5.0 in/sec
- -40 to 100°C range
- 4-20mA output
- Up to 1000Hz
- Velocity transmitter
8011
The Model 8011 is an internally shielded rugged 4-20mA velocity transmitter. The transmitter is available in ranges from 0.5 to 5.0 in/sec, in either RMS or Peak velocity output options. The model 8011 features a top exit MIL-C-5015 connector.
-
1203
- 0-1000g range
- 0 to 50°C range
- mV output
- Up to 3000Hz
- High overload
1203
The Model 1203 accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 50 g to 1000 g and frequency response to 3000 Hz, this sensor is easily mounted in hard to reach places on vehicles under test.
-
1210F
- 200g range
- -40 to 100°C range
- mV output
- Up to 1800Hz
- Ratiometric output
1210F
The Model 1210F accelerometer is a small, compact uniaxial MEMS accelerometer designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 2g to 200g and frequency response to 2000 Hz, this sensor is easily mounted in hard to get places on vehicles under test.
-
4801A
- 0-500g range
- -55 to 125°C range
- V output
- Up to 1800Hz
- Detachable cable
4801A
The Model 4801A is a true hermetically sealed accelerometer in a rugged stainless steel package. The sensor offers an amplified signal conditioned output.
-
68C
- 0-2000g range
- -20 to 85°C range
- mV output
- Up to 3000Hz
- J211 triaxial accelerometer
68C
The Model 68C accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications.This sensor is easily mounted in hard to reach places. This accelerometer is compliant with J211 specifications for anthropomorphic dummy applications.
-
7508A
- 0-4000g range
- -73 to 200°C range
- IEPE
- Up to 7000Hz
- Adhesive mount
7508A
The Model 7508A is a miniature piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements at temperatures up to +200°C. The accelerometer incorporates an annular shear mode crystal installed with a compression ring that eliminates the usage of epoxies that can affect long term stability at elevated temperatures.
-
64L
- 0-6000g range
- 0 to 50°C range
- mV output
- Up to 4500Hz
- Auto safety accelerometer
64L
The Model 64L accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. The Model 64L is compliant with SAE J211 standards for anthropomorphic dummy instrumentation.
-
1201F
- 0-1000g range
- -20 to 85°C range
- mV output
- Up to 3000Hz
- Overload stops
1201F
The Model 1201F accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. This sensor is easily mounted in hard to get places on vehicles under test.
-
52F
- 0-2000g range
- -40 to 90°C range
- mV output
- Up to 7000Hz
- Flange mounting
52F
The Model 52F accelerometer has an advanced piezoresistive MEMS sensing element which offers excellent dynamic range and stability. This unit features a full bridge output.
-
EGAX / EGAXT
- 0-2500g range
- -40 to 120°C range
- mV output
- Up to 3000Hz
- Low mass
EGAX / EGAXT
The Model EGAX / EGAXT miniature accelerometers combine a damping ratio of 0.7 (Nominal) with built-in over-range stops that protect the unit against 10,000g shocks. This is ideal for applications which may experience rough handling or in situations where the accelerometer must survive a high initial overload in order to make a low g measurement.
-
EGAXT3
- 0-2500g range
- -40 to 120°C range
- mV output
- Up to 3000Hz
- DC response
EGAXT3
The Model EGAXT3 miniature triaxial accelerometer combines a damping ratio of 0.7 (Nominal) with built-in over-range stops that are set to protect the unit against 10,000g shocks. This is ideal for applications which may experience rough handling or in situations where the accelerometer must survive a high initial overload in order to make a low g measurement. These units feature a Wheatsone Bridge output with compensated temperature range of 20 to 80 °C.
-
4000A/4001A
- 0-200g range
- -20 to 85°C range
- Amplified output
- Up to 1500Hz
- Rugged
4000A/4001A
The Model 4000A & 4001A are economical signal conditioned accelerometers with integral temperature compensation. The accelerometers incorporate a 3rd generation silicon MEMS sensor providing outstanding performance. The accelerometers are packaged in a rugged aluminum housing ideal for transportation and instrumentation testing. The signal conditioned output incorporates a 2.5V reference that offers the user a differential or single-ended output.
-
7102A
- 0-2000g range
- -55 to 125°C range
- V output
- Up to 11KHz
- Titanium body
7102A
The accelerometer features a welded hermetic titanium construction with an M3 connector. The miniature and light weight titanium package renders the accelerometer ideal for applications requiring minimal mass loading.
-
EGAS3
- 0 to 2500g range
- -40 to 120°C range
- mV output
- Up to 3500Hz
- Triaxial
EGAS3
The Model EGAS3 is a cube-shaped, triaxial accelerometer. Operating from 15 Vdc, this unit features a transverse sensitivity of 2% MAX and damping of 0.7. Over-range stops ensure survivability of the unit under extreme shock conditions while its temperature performance offers a minimal zero shift.
-
EGAS
- 0-2500g range
- -40 to 120°C range
- mV output
- Up to 3500Hz
- Damping Ratio 0.7
EGAS
The Model EGAS is a miniature, uniaxial accelerometer. The EGAS is the unit of choice for measurement professionals in the automotive, military, aerospace and transportation industries. Its combined nonlinearity and hysteresis of +/- 1% makes the EGAS well-suited for on-site testing as well as laboratory use.
-
201
- 0-50g range
- -40 to 125°C range
- mV output
- Up to 4000Hz
- Damping ratio 0.7
201
The Model 201 is a low noise accelerometer offering both static and dynamic response. The accelerometer is packaged in an anodized aluminum housing with an integral cable.
-
52
- 0-2000g range
- -40 to 90°C range
- mV output
- Up to 7000Hz
- Auto safety accelerometer
52
The Model 52 accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit features a full bridge output configuration.
-
7204A
- 0-500g range
- -55 to 130°C range
- mV output
- Up to 15000Hz
- High resonance
7204A
The Model 7204A is a case isolated high temperature IEPE accelerometer with internal shielding. The accelerometer has a flat bandwidth up to greater than 15kHz with a resonant frequency greater than 40kHz.
-
4610
- 0-500g range
- -40 to 120°C range
- Amplified output
- Up to 3500Hz
- Gas damped
4610
The Model 4610 is a low noise signal conditioned accelerometer with exceptional long-term stability. The accelerometer offers integral temperature compensation and a hermetically sealed sensor assembly. The Model 4610 is offered in ranges from 2 to 500g and incorporates mechanical overload stops that provide shock protection to 10,000g. The 3rd generation MEMS element incorporates gas damping that offers a wide dynamic range and stable frequency response.
-
7530A
- 0-4000g range
- -73 to 200°C range
- IEPE
- Up to 6000Hz
- Miniature IEPE
7530A
The Model 7530A is a triaxial piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. The accelerometer incorporates three independent annular shear mode crystal assemblies installed with a compression ring that eliminates the usage of epoxies that can affect long term stability at elevated temperatures. The annular shear crystals also provide a stable thermal response up to +200 and a nominal charge output of 5.6pC/g which offers optimum signal to noise ratio.
-
7108A
- 0-500g range
- -55 to 125°C range
- V output
- Up to 10KHz
- Miniature IEPE
7108A
The Model 7108A is a miniature adhesive mount IEPE accelerometer available in ±50g to ±500g dynamic ranges. The accelerometer features a welded hermetic stainless steel construction with a 10-32 top connector. The model 7108A incorporates a stable piezo-ceramic crystal in annular shear mode, installed with a compression ring that eliminates the usage of epoxies that can affect long term stability. The accelerometer has an operating range of -55°C to +125°C and a flat frequency response to 10kHz.
-
EGCS-S425
- 0-2000g range
- -20 to 80°C range
- mV output
- Up to 2000Hz
- Oil damped
EGCS-S425
The Model EGCS-S425 is a small ISO 6487 and SAE J211 compliant piezoresistive accelerometer. This unit features internal temperature compensation, anodized aluminum alloy housing and flexible cable output. This sensing element is damped with fluid to extend useful frequency range and reduce the effect of high frequencies.
-
EGCS-A2/B2
- 0-5000g range
- -40 to 120°C range
- mV or amplified output
- Up to 2400Hz
- Heavy duty
EGCS-A2/B2
The Model EGCS accelerometers combine a damping ratio of 0.7 (Nominal) with built-in over-range stops that are set to protect the unit against 10,000g shocks. This is ideal for applications which may experience rough handling or in situations where the accelerometer must survive a high initial overload in order to make a low g measurement.
-
EGCS3-D
- 0-5000g range
- -40 to 120°C range
- mV output
- Up to 4000Hz
- CE rating
EGCS3-D
The Model EGCS3-D triaxial accelerometer is available in ranges from ±5 g through ±5000 g. With over-range limit to ±10,000 g and spring strain relief, this rugged device is ideal for offshore, downhole and shock testing applications. Its small size and screw mounting ensure ease of installation, while its low power requirements and DC output facilitate integration into data acquisition and monitoring systems. The EGCS3 also features CE conformance to EN 61010-1, EN 50081-1 and EN 50082-1.
-
EGCS-D1S
- 0-5000g range
- -40 to 120°C range
- mV output
- Up to 4000Hz
- Damping ratio 0.7
EGCS-D1S
The Model EGCS accelerometer combines a damping ratio of 0.7 (Nominal) with built-in over-range stops that are set to protect the unit against 10,000g shocks. This is ideal for applications which may experience rough handling or in situations where the accelerometer must survive a high initial overload in order to make a low g measurement. These units feature a Wheatsone Bridge output with compensated temperature range.
-
EGCS-DO
- 0-5000g range
- -40 to 120°C range
- mV output
- Up to 4000Hz
- Heavy duty
EGCS-DO
The Model EGCS accelerometers combine a damping ratio of 0.7 (Nominal) with built-in over-range stops that are set to protect the unit against 10,000 g shocks. This is ideal for applications which may experience rough handling or in situations where the accelerometer must survive a high initial overload in order to make a low g measurement. These units feature a Wheatsone Bridge output with compensated temperature range.
-
4332
- 0-2 or 5g range
- -40 to 85°C range
- Amplified output
- Up to 700Hz
- IP68
4332
The Model 4332 is a low noise triaxial accelerometer offering both static and dynamic response. The accelerometer is packaged in an anodized aluminum housing and is offered in ±2g & ±5g range. The model 4332 features an integral cable and is certified to IP68 protection. The accelerometer incorporates a 50Hz LP filter and an operating temperature range of -40°C to +85°C.