ESAM Traveller 1

ESAM TRAVELLER 1 is a high-performance digital data acquisition system for amplifying and conditioning of analogue sensor signals. The Master Unit represents the heart of the system. In a very small cabinet it contains: The power supply, the USB-Interface with a  RAM-data buffer, the A/D-Converter as well as 8 modules of Model SGA3 strain gauge bridge amplifiers. The system can easily be extended up to a 32 channels capacity by simply adding  max. 3 Extension Units with 8 channels each of Model SGA3 strain gauge bridge amplifiers.
 

PSD 704

Universal Analog Measurement Module (e.bloxx)

Sample rates up to 1000 Hz andresolutions up to 19 bit are possible depending on the module and signaltype used. Standardized communication protocols (Profibus-DP andModbus-RTU) allow the e.bloxx family to work with a wide variety ofapplication hardware and software.

With the addition of an e.gate the data throughput and connectivity options increase dramatically. The e.gate is a data concentrator and communication gateway, with 100 Mbps Ethernet and 12 Mbps Profibus-DP ports standard.

 

e.rack A6-16 Slimline

The e.rack slimline is a low profile rack mount design, and easily connects to the wide variety of field devices used in today's test beds.  Sample rates up to 1000Hz and resolutions up to 19bit are possible depending on the unit and signal type used.

Standardized communication protocols (Profibus-DP and Modbus-RTU) allow the e.rack slimline family to work with a wide variety of application hardware and software (including e.bloxx)

Miniature Load Cell Amplifier 2818

SG1 Strain gauge tester and indicator

• Highly accurate measurement strain gauge and other sensor's resistances
• Precise measurements of resistance deviations between gauges
• Precise measurements of resistance to ground  of strain gauge installations, range up to  20 GΩ; test voltage 20 V
• Determination of strain gauge installation offsets
• Function test of strain gauge installations with built-in signal conditioner/amplifier
• Data output via USB-port optional

4318 Amplifier

The 4318 amplifier is a straightforward digital set-up analogue amplifier that offer high performance and great versatility.  The amplifier is addressable and can be ganged together in up to 16 units.

LC 11 - Calog

It can test a loadcells' zero balance, input resistance, output resistance, bridge balance, 50V DC insulation test from bridge to shield, bridge to housing and shield to housing.

The Calog- Loadcell Calibrator is a hand-held precision calibrator specifically designed for load cell testing, including insulation breakdown and weighing system calibration or simulation. Simply connect a strain-gauge load cell to the spring terminals and press "TEST LOADCELL". The backlit graphics will display four or six wire, zero balance, input or output resistance and bridge balance. It can then carry out a 50 VDC insulation test form bridge to shield, bridge to housing and shield to housing.

For system testing and calibration the Calog- Loadcell Calibrator can simultaneously measure mV (with mass display), excitation voltage and mA. In source mode, used for load cell amplifier pre-calibration testing, it can source mV (with mass display), measure excitation and measure mA. In simulate mode it sources a mA signal to the control room or SCADA. The display can be in mA, mA and mass or mass and mA.

Traveller StrainMaster SGIT (SG1)

Traveller StrainMaster SGIT is a Strain Gauge Installationstester by ESA with a built-in bridge amplifier. It is a versatile, very compact battery-powered instrument for testing and verification of already existing or new strain gauge installations.

ESAM Traveller CF

Traveller CF is a Signal Conditioner Amplifier System with CF-Card data Storage. Flexible channel numbers and simple, straight forward operation procedures make the system meet the latest requirements of digital measurement technology and data processing. A built-in PCM-encoder enables telemetric operation with fast data transfer rates and high data security. System Traveller CF excellently satisfies all the sophisticated demands of stationary and mobile measurements of mechanical and electrical quantities.