1. High Accuracy Miniature Pressure Transducer

    High Accuracy Miniature Pressure Transducer

    Model: EB100
    • Ranges from 20 to 350 bar (300 to 5,000 psi)
    • Unique pressure reference version Absolute
    • Operating temperature up to 125 °C (257 °F)
    • Combined errors of linearity, hysteresis & repeatability ±0.25%
    • 0.5 to 4.5V amplified output

    High Accuracy Miniature Pressure Transducer

    The EB100 pressure transducer is the smallest design proposed by TE CONNECTIVITY from the UltraStable™ line. It sets a new price / performance standard for demanding commercial and heavy industrial applications where high accuracy, small size and low weight are desirable. This series is suitable for measurement of liquid or gas pressure, including difficult media such as contaminated water, steam, and mildly corrosive fluids.

    The EB100 uses TE’s UltraStable™ technology that provides stability over a wide temperature range and performance previously available only in much higher priced sensors. The UltraStable™ technology employs a silicon-based strain gage, isolated from the media by an oil-filled capsule and a stainless steel diaphragm. The high stability offers excellent repeatability and minimal hysteresis.

    The 100% stainless steel media isolation covers all but the most corrosive environments, offering excellent durability. Custom OEM designs are available including various ports and output options.

    Our Technical Sales Team is available to help with the selection of our High Accuracy Miniature Pressure Transducer and Data Acquisition Systems. Use the enquiry button, call or email.

  2. Multiaxial Load Cell

    Multiaxial Load Cell

    Model: FN7325
    • 6-component load cell
    • 5 kN to 250 kN (1 klbf to 50 klbf)
    • Measures force in  X,Y,Z
    • Measures torque in Mx,My,Mz
    • Minimal Cross Effects

    Multiaxial Load Cell

    The multiaxial FN7325 measures force from 0-5 kN to 0-250 kN along three axes as well as the corresponding torque from 0-200 Nm to 0-7000 Nm. The FN7325 is simple to use and install and in many diverse applications circumvents the necessity of employing multiple single-axes units. 

    The FN7325 is a multiaxial sensors based on strain gages technology assembled in Wheatstone full bridges. Each sensor is able to measure up to 6 channels Fx, Fy, Fz, Mx, My & Mz which can be selected by customer, as example FN7325-M6-ZLM corresponds to a 3 channels (Fz, Mx & My) with a M6 sensor design.

    Multiple designs and options can be adapted to this sensor such as integrated amplifier (A1 or A2) or separated connectors or cable outputs. Its interfaces can also be modified to fit customer’s specifications.

    With many years of experience as a designer and manufacturer of sensors, TE CONNECTIVITY often works with customers to design or customize sensors for specific uses and testing environments. 

    Our Technical Sales Team is available to help with the selection of our Multiaxial Load Cell and Data Acquisition Systems. Use the enquiry button, call or email.

  3. Miniature Pressure Transducer

    Miniature Pressure Transducer

    Model: EPRB-2
    • Ranges from 3.5 to 700 bar (50 to 10,000 PSI)
    • Gage and absolute pressure references
    • Operating temperature up to 150 °C (300 °F)
    • Variety of pressure ports
    • 0.5 to 4.5V or 4-20mA amplified output

    Miniature Pressure Transducer

    EPRB-2 is an ultra-miniature pressure transducer of 100% stainless steel welded construction. It is designed for severe environments where minimum size and light weight are required.

    Multiple interfaces such as pressure ports and electrical outputs, connection thru cables or connectors have been designed to offer a wide range of adaptability to customer’s standards.

    EPRB-2 models have amplified output, either 5Vdc ratiometric or 8-30Vdc for use on vehicle, military, test equipment or on a test bench.

    Our Technical Sales Team is available to help with the selection of our Miniature Pressure Transducer and Data Acquisition Systems. Use the enquiry button, call or email.

  4. Multi-components Gear Stick Load Cell

    Multi-components Gear Stick Load Cell

    Model: FN7080
    • Ranges 200 to 500 N (40 to 100 lbf)
    • Multi-components, up to 3 force channels
    • Aluminium body
    • High adaptability to rod by cylindrical interfaces

    Multi-components Gear Stick Load Cell

    Designed for automotive comfort testing, the FN7080 is installed in place of the original gear knob on the gear stick and measures the force required to change gear. Force is measured either in two or three directions. An adapter coupled with an interface collar allows a simple and rapid fitting of the FN7080 to the majority of vehicles.

    The ease of mounting enables the FN7080 to be used on a vehicle or on a test bench. An optional version provides direct high level output and makes the FN7080 a favorite among European car builders.

    TE CONNECTIVITY has many years of experience as a designer and manufacturer of sensing solutions to the automotive industry and can supply standard or custom sensors for specific uses and testing environments.

    Our Technical Sales Team is available to help with the selection of our Multi-components Gear Stick Load Cell and Data Acquisition Systems. Use the enquiry button, call or email.

  5. Miniature Pressure Transducer

    Miniature Pressure Transducer

    Model: EPRB-3
    • Pressure + temperature measurement
    • 3.5 to 700 bar (50 to 10,000 psi)
    • Unique pressure reference version Absolute
    • up to 150 °C (300 °F)
    • 0.5 to 4.5V amplified output

    Miniature Pressure Transducer

    EPRB-3 is an ultra-miniature pressure transducer of 100% stainless steel welded construction. It is designed for severe environments where minimum size and light weight are required.

    EPRB-3 design is constructed with an independent platinum PT1000 probe to sense the physical media temperature.

    EPRB-3 models have amplified output, either 5Vdc ratiometric or 8-30Vdc for use on vehicle, military, test equipment or on a test bench.

    Our Technical Sales Team is available to help with the selection of our Miniature Pressure Transducer and Data Acquisition Systems. Use the enquiry button, call or email.
     

  6. Miniature dynamic pressure sensor 5mm thread

    Miniature dynamic pressure sensor 5mm thread

    Model: XPM5
    Replaced by XP5

    Miniature dynamic pressure sensor 5mm thread

    The XPM5 is a miniature 5mm threaded transducer designed to measure static and dynamic pressure under a wide variety of conditions, including hostile environments. The product is flush mounted and constructed in Titanium for ultimate protection against corrosive media and designed for long term survivability. Frequency response is 20 to 160 kHz depending on the pressure range selected which are available from 0-10 (0-150 psi) to 0-350 (0-5000 psi) in either gauge, sealed gauge or absolute and standard output is 100mV full scale or amplified. The product benefits from having long term stability, so no zero shift and very low torque shift when fitting. Several options are available including cable or integral connector options, compensated temperature ranges, ingress protection to IP67. Applications can range from aerospace, test benches, explosive testing, brake pressure, research, laboratory. A true alternative to other product suppliers such as Kulite or GE sensing. NOTE this product has recently been upgraded, please see XP5 new data sheet.

  7. Miniature pressure sensor

    Miniature pressure sensor

    Model: XPM10
    • Ranges 1 to 350 bars [15 psi to 5 000 psi]
    • Absolute, sealed and gauge ranges
    • Amplified output available
    • Linearity up to ±0.25% F.S

    Miniature pressure sensor

    The XPM10 is a miniature transducer designed to measure static and dynamic pressure under a wide variety of conditions, including hostile environments. It is made of stainless steel or titanium and is available in standard ranges from 0-1 to 350 bars [15 up to 5000 psi].

    The XPM10 incorporates Measurement Specialties’ cutting edge SanShiftTM technology, which virtually eliminates zero shifts caused by installation torque.

    A PT1000 temperature probe is optionally available as a custom design.

    The XPM10 may integrate different electronics for amplified outputs: A1 0.5-4.5V, A2 ±5V, A3 4-20mA.

    Our Technical Sales Team is available to help with the selection of our Miniature pressure sensor and Data Acquisition Systems. Use the enquiry button, call or email.

  8. DPG Series

    DPG Series

    • +/-5° to +/-30° range
    • -40°C to 85° range
    • RS232 or V output
    • 0.001° resolution
    • IP67/68 protection

    DPG Series

    The DPG-Series dual axis conductive inclinometer in aluminum housing offers the user modern microprocessor technology with an integrated active linearization and temperature compensation. This inclinometer is full calibrated, easy to horizontal mount and absolute plug and play compatible.

  9. DQG Series

    DQG Series

    • +/-25° range
    • -40° to 85°C range
    • V, mA or RS232 output 
    • upto 0.01° resolution
    • IP66 protection

    DQG Series

    The DQG-Series is a small inclinometer based on dual axis tilt sensor for horizontal mounting, which works based on the conductivity principle. This microprocessor controls the inclinometer with a linearized and temperature compensated angle output signal. The unit has metal housing and exhibits an 8…30VDC power supply.

  10. D Series

    D Series

    • +/-5° +/-15° and +/-30°
    • -40-85°C range
    • mA, V or RS232 output
    • 0.04° Accuracy
    • CE Approved

    D Series

    This inclinometer achieves high accuracy over a wide temperature range. The fast microcontroller works with a linearization and temperature compensation routines. With it's rugged housing and IP67 protection. This device is easy to use and very user configurable. 

  11. Anglestar protractor System (APS)

    Anglestar protractor System (APS)

    Model: APS
    • Complete angle measurement system
    • Battery or external powered
    • Ranges: ±19.99o, ±45.0o and 0 to +90o
    • Remote sensing up to 200 feet

    Anglestar protractor System (APS)

    The AngleStar® Protractor System (APS) is a ready to use, stand-alone system for angle measurements. The system incorporates an AngleStar® ratiometric electronic clinometer, a digital LCD display, and a four foot interconnecting cable (cable lengths up to 200 feet are available, consult factory for details).

    This system will operate for 500 hours on one 9 volt battery (not included), or may be powered from an external power source between +9 and +15 VDC, drawing minimal current. The display may be mounted up to 200 feet from the sensor for remote sensing applications such as drilling equipment or tower crane overload protection.

    There are three systems to choose from; ±19.99 degrees with 0.01 degree resolution, ±45° or 0-90°, both having 0.1 degree resolution.

    Our Technical Sales Team is available to help with the selection of our Anglestar protractor System (APS) and Data Acquisition Systems. Use the enquiry button, call or email.

  12. Model 52F Accelerometer

    Model 52F Accelerometer

    Model: 52F
    • Small Size, Aluminum Housing
    • Low Noise, Jacketed Cable
    • ±50g to ±2000g Range
    • Silicon MEMS Technology
    • High Over Range Protection

    Model 52F Accelerometer

    The Model 52F Accelerometer has an advanced piezoresistive MEMS sensing element which offers excellent dynamic range and stability.  This unit features a full bridge output with an operating temperature range from -40 to +90°C.  A slight amount of gas damping provides outstanding shock survivability and a flat amplitude response to 7kHz.

    Our Technical Sales Team is available to help with the selection of our Model 52F Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  13. Model 4000A & 4001A Accelerometer

    Model 4000A & 4001A Accelerometer

    Model: 4000A & 4001A
    • Silicone MEMS Accelerometer
    • Signal Conditioned Output
    • Temperature Calibrated
    • Low Cost, Lightweight

    Model 4000A & 4001A Accelerometer

    The Model 4000A & 4001A are economical signal conditioned accelerometers with integral temperature compensation. The accelerometers incorporate a 3rd generation silicon MEMS sensor providing outstanding performance. The accelerometers are packaged in a rugged aluminum housing ideal for transportation and instrumentation testing. The signal conditioned output incorporates a 2.5V reference that offers the user a differential or single-ended output.

    Our Technical Sales Team is available to help with the selection of our Model 4000A & 4001A Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  14. Industrial 0.05% accuracy

    Industrial 0.05% accuracy

    Model: P9000
    • 0-700 bar (0-10K psi) 
    • -40° to 100°C range
    • Voltage or current output
    • Accuracy 0.05%
    • Digital compensation

    Industrial 0.05% accuracy

    The P9000 Series is a range of advanced, digitally compensated pressure transducers. The unique design of the P9000 pressure transducer utilizes the proven reliability of strain gauge technology and innovative digital compensation electronics. With mechanical overtravel stops, the unit is designed for extreme environment applications where pressure spikes or pressure surges will occur. Applications include test benches, steel mills, paper mills, military or commercial aircaft, military testing. Legacy brand name in Schaevitz or Lucas Schaevitz.

  15. Model 7108A Accelerometer

    Model 7108A Accelerometer

    Model: 7108A
    • IEPE Accelerometer
    • Wide Bandwidth to 10kHz
    • 10-32 Top Connector
    • Miniature, Adhesive Mount

    Model 7108A Accelerometer

    The Model 7108A is a miniature adhesive mount IEPE accelerometer available in ±50g to ±500g dynamic ranges. The accelerometer features a welded hermetic stainless steel construction with a 10-32 top connector. The model 7108A incorporates a stable piezo-ceramic crystal in annular shear mode, installed with a compression ring that eliminates the usage of epoxies that can affect long term stability. The accelerometer has an operating range of -55°C to +125°C and a flat frequency response to 10kHz.

    Our Technical Sales Team is available to help with the selection of our Model 7108A Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

     

  16. Pressure transducer

    Pressure transducer

    Model: P101
    • Ranges from 10 to 1000 bars
    • Gage pressure reference
    • Several available options
    • Harsh environment

    Pressure transducer

    The P101 is a pressure transducer designed to measure pressure under a wide variety of conditions, including hostile environments and temperatures up to 150 °C. 

    Its stainless steel body and sealing options render the P101 ideal for use in chemically aggressive environments, such as Skydrol® aviation hydraulic fluid.

    The sensing element is fitted with a temperature compensated Wheatstone bridge equipped with thin strain gauges. The P101-A1/A2 Series include a high level output.

    Our Technical Sales Team is available to help with the selection of our Pressure transducer and Data Acquisition Systems. Use the enquiry button, call or email.

  17. Dynamic high temperature M10

    Dynamic high temperature M10

    Model: EPXO
    • 0-10 to 0-500 bar gauge or absolute
    • -40° to 220°C range
    • mV or amplifed output
    • Accuracy 0.75%
    • High frequency applications

    Dynamic high temperature M10

    The EPXO is a high performance pressure sensor from entran with a stainless steel flush diaphragm. It is designed for high temperature, high stability, and high sensitivity applications.  The EPXO pressure sensor is offered in pressure ranges from 10 to 500 bar in gauge, sealed gauge and absolute pressure. Various compensated temperature ranges are available for -40 up to 220 deg c. The sensor is offered with an amplifed or unamplified output. Applications for this EPXO pressure sensor include chemical processing, automotive test benches, marine and flight testing. NOTE: this product has recently been upgraded to improve zero stability and reduced torque shift see new XPC10 data sheet.

                                 

  18. Miniature dynamic 5mm thread

    Miniature dynamic 5mm thread

    Model: EPX
    • 0-350mbar to 0-350 bar gauge or absolute
    • -40° to 120°C range
    • High frequency measurements
    • Accuracy 0.5%
    • Stainless steel construction

    Miniature dynamic 5mm thread

    The EPX is a miniature 5mm threaded transducer designed to measure static and dynamic pressure under a wide variety of conditions, including hostile environments. The product is flush mounted and constructed in stainless steel for ultimate protection against corrosive media and designed for long term survivability. Frequency response is 9 to 90 kHz depending on the pressure range selected which are available from 0-350 mbar (0-5 psi) to 0-350 bar (0-5000 psi) in either gauge, sealed gauge or absolute and standard output is 100mV full scale or amplified. Several options are available including cable or integral connector options, compensated temperature ranges, ingress protection to IP67. Applications can range from aerospace, test benches, explosive testing, brake pressure, research, laboratory, space and radiation environments. A true alternative to other product suppliers such as Kulite or Endevco. NOTE this product has recently been upgraded, please see XP5 new data sheet.
     

  19. Micro miniature dynamic stainless steel

    Micro miniature dynamic stainless steel

    Model: EPB


    0-350mbar-0-350bar gauge/absolute
    -40° to 120°C range
    High frequency dynamic
    Accuracy 0.25%
    Stainless steel flush diaphragm

    Micro miniature dynamic stainless steel

    EPB is an extremely small pressure probe sensor, small profile of 3.18mm, stainless steel, flush mount transducer designed for general media. Frequency response of 11-80 kHz depending on pressure range selected makes it suitable for both static and dynamic measurements. Depending on size requirements the temperature compensation can be internal or fitted in a temperature compensation module. The sensor is non threaded and is fitted using rtv or epoxy compounds or a rear mounted nut, special designs are available on request. Applications include automotive testing, drilling tools, test and evaluation, research, pore pressure, product design or for testing where small size is the biggest issue.

  20. Sub-Miniature Pressure sensor

    Sub-Miniature Pressure sensor

    Model: EPIH
    • Ranges 0.35 to 20 bar (5 to 300 psi)
    • Extremely small size
    • Flush diaphragm
    • High frequency response
    • Various housings available

    Sub-Miniature Pressure sensor

    The EPIH is a subminiature pressure sensor, specifically designed for dynamic and high frequency measurements with resonant frequency up to 1.7 MHz.

    Available with many various housings, EPIH is one of the smallest pressure sensors in the world. The EPIH is offered in pressure ranges from 0-5 to 300 psi (0-0.35 through 20 bar). Various compensated temperature ranges are available from -40°C up to 80°C.

    Suitable for dry gas and some fluids with Parylene or RTV protection (options). Non-standard excitation, compensated temperatures are available as options.

    Our Technical Sales Team is available to help with the selection of our Sub-Miniature Pressure sensor and Data Acquisition Systems. Use the enquiry button, call or email.

  21. Subminiature flush mount dynamic

    Subminiature flush mount dynamic

    Model: EPL
    • 0-350mbar to 0-350 bar gauge or absolute
    • -40° to 120°C range
    • mV output
    • Accuracy 0.5%
    • Stainless steel diaphragm

    Subminiature flush mount dynamic

    The EPL is a surface mount pressure sensor with a stainless steel diaphragm for dynamic testing applications. Pressure ranges from 350mbar to 350 bar (5 to 5000 psi) in either gauge, sealed gauge or absolute pressure references. The EPL is easy to install on flat surfaces using elastomer or epoxy. Various compensated temperature ranges are available from -40°C up to 90°C. Applications include wind tunnels, wind turbine testing. For use in liquids, it is highly recommended you contact us to discuss the application in detail.

  22. Model EGCS-S425 Accelerometer

    Model EGCS-S425 Accelerometer

    Model: EGCS-S425
    • Range ±50 to ±2000g
    • Critically Damped
    • Internally Compensated
    • ISO 6487 Compliant

    Model EGCS-S425 Accelerometer

    The Model EGCS-S425 is a small, ISO 6487 and SAE J211 compliant piezoresistive accelerometer. This unit features internal temperature compensation, anodized aluminum alloy housing and flexible cable output. This sensing element is damped with fluid to extend useful frequency range and reduce the effect of high frequencies.

    Our Technical Sales Team is available to help with the selection of our Model EGCS-S425 Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  23. CD1095

    CD1095

    Model: CD1095
    • Dynamic rotary torque
    • 5 to 2.5KNm range
    • mV or amplified output
    • -20° to 80°C range
    • Keyed shaft couplings

    CD1095

    The CD1095 has been designed to measure in-line torque on rotating shafts. Its sensing element isbased on thin layer strain gauges in a Wheatstone bridge configuration providing excellent temperature stability.

  24. Test standard 0.05%

    Test standard 0.05%

    Model: US10000
    • 0-700 Bar (0-10K psi) gauge or abs
    • -25° to 85°C range
    • Voltage or analogue output
    • Accuracy 0.05%
    • Stainless steel construction

    Test standard 0.05%

    The US10000 pressure transmitter offers excellent 0.05% accuracy and TEB (Total Error Band including temperature) of 0.25%. Several configuraton options are available such as 0-5V, 0-10V and 4-20mA outputs and Mil Spec connectors. Applications include military, calibration equipment and automotive test stands. This product is due to be replaced by the U5300 series sensor in 2014.

  25. OEM 0.1% accuracy

    OEM 0.1% accuracy

    Model: US300
    • 0-350 bar (0-5K psi)
    • -40° to 105°C range
    • mV, volt or current output
    • Accuracy 0.1%
    • Stainless steel construction

    OEM 0.1% accuracy

    The US300 Series incorporates stainless steel isolation, and provides a wide choice of standard pressure ranges and electrical outputs in a very compact package. This product uses MEAS’ UltraStable™ technology that provides stability over a wide temperature range, performance previously available only in much higher priced sensors. The modular design is adaptable to a wide variety of pressure ports and electrical connectors. Standard outputs include 0 to 100mV, 0.5 to 4.5V ratiometric, 1 to 5V regulated and 4 to 20mA current loop. Suitable for medium to high volume OEM requirements for test benches, compressed gasses, HVAC controls, refrigeration, water pressure monitoring. Should addiitonal options be needed, refer to U5100 series.

  26. Differential Pressure Transducer

    Differential Pressure Transducer

    Model: D5100
    • 0-70mbar to 0-35bar differential 
    • -40° to 125°C range
    • mV, voltage or analogue output
    • Accuracy 0.25%
    • Stainless steel construction

    Differential Pressure Transducer

    The D5100 family has many different pressure range, output and process connection options. This is a uni-directional diffential pressure sensor with differential pressure ranges starting from 0-70 mbar (0-1 psi) and upwards. There are many choices of output including 4-20mA, ratiometric, mV and amplified voltage. The sensor has built in surge protection and reverse polarity protection. Suitable for both OEM and end user requirements. Applications include filter blockage protection, process control, industrial applications, tank level measurements. If you have an extreme application with very high common mode pressures (very high pressure on one side) we recommend P2100 series.  

  27. Model 4801A Accelerometer

    Model 4801A Accelerometer

    Model: 4801A
    • Amplified, Signal Conditioned
    • MEMS DC Response
    • Hermetically Sealed, Detachable Cable
    • -55°C to +125°C Operating Range

    Model 4801A Accelerometer

    The Model 4801A is a true hermetically sealed accelerometer in a rugged stainless steel package.  The offers an amplified signal conditioned output in ranges from ±2 to ±200g. The model 4801A incorporates enhanced temperature compensation and a gas damped MEMS sensing element for optimum frequency response. Mechanical over-range stops offers shock protection up to 5,000g designed for both static and dynamic measurements in critical applications.

    Our Technical Sales Team is available to help with the selection of our Model 4801A Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  28. Model 4630 Accelerometer

    Model 4630 Accelerometer

    Model: 4630
    • MEMS Triaxial Accelerometer
    • DC Response, Ultra-Stable
    • Accurate Temp Compensation
    • Signal Conditioned Output
    • 5,000g Over-Range Protection

    Model 4630 Accelerometer

    The Model 4630 is an ultra-stable triaxial accelerometer offering both static and dynamic response. The silicon MEMS accelerometer incorporates integral temperature compensation that provides a stable output over a wide operating range. The three independent circuit assemblies have independent signal conditioning and can operate on common or separate power supplies. The advanced MEMS sensing elements are gas damped in order to provide a wide stable frequency response.

    Our Technical Sales Team is available to help with the selection of our Model 4630 Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  29. Model 3700 Accelerometer

    Model 3700 Accelerometer

    Model: 3700
    • Shock & Impact Testing
    • Piezoresistive MEMS
    • mV Output, DC Response
    • Low Noise, Shielded Cable

    Model 3700 Accelerometer

    The Model 3700 is a MEMS piezoresistive shock accelerometer in a rugged stainless steel package. The accelerometer is available in ranges from is offered in ranges from ±50 to ±6000g and is ideal for long duration shock transient measurements. The accelerometer incorporates mechanical over-range stops and is packaged in an industry standard footprint.

    Our Technical Sales Team is available to help with the selection of our Model 3700 Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

     

  30. 8011 Accelerometer

    8011 Accelerometer

    Model: 8011
    • 0.5 to 5.0 in/sec
    • -40 to 100°C range
    • 4-20mA output
    • Up to 1000Hz
    • Velocity transmitter

    8011 Accelerometer

    The Model 8011 is an internally shielded rugged 4-20mA velocity transmitter. The transmitter is available in ranges from 0.5 to 5.0 in/sec, in either RMS or Peak velocity output options. The model 8011 features a top exit MIL-C-5015 connector.

  31. Adhesive/Stud, Triaxial

    Adhesive/Stud, Triaxial

    Model: 7132A
    • +/-50g to +/-2000g ranges
    • -55 to 125 Deg C
    • Voltage output
    • Up to 12000 Hz
    • Hermetically sealed, Titanium

    Adhesive/Stud, Triaxial

    The Model 7132A features a hermetically sealed titanium construction with a 4-pin Microtech connector interface. The model 7132A incorporates stable piezo-ceramic crystals in annular shear mode which provide a flat frequency response up to >12kHz.  The Dynamic Range for this model is: +/-50, 100, 500 or 2000g.

  32. Model 7502A Accelerometer

    Model 7502A Accelerometer

    Model: 7502A
    • +260°C Charge Output Accelerometer
    • 1.8pC/g output, 14kHz Bandwidth
    • Hermetically Sealed
    • Miniature, Lightweight (0.8gm)

    Model 7502A Accelerometer

    The Model 7502A is a miniature piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. The accelerometer incorporates an annular shear mode crystal that provides stable thermal response up to +260°C. The model 7502A is hermetically sealed and features a nominal charge output of 1.8pC/g. The miniature and light weight Titanium package renders the accelerometer ideal for applications requiring minimal mass loading.

    Our Technical Sales Team is available to help with the selection of our Model 7502A Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  33. Model 7100A Accelerometer

    Model 7100A Accelerometer

    Model: 7100A
    • +150°C IEPE Accelerometer
    • Wide Bandwidth to 15kHz
    • Hermetically Sealed
    • Through Hole Mount

    Model 7100A Accelerometer

    The Model 7100A is a high performance IEPE accelerometer with an operating temperature range of -55°C to +150°C. The accelerometer is available in ±50 to ±500g ranges and provides a flat frequency response up to 15kHz. The model 7100A is hermetically sealed and features the popular through hole mount installation for use with standard mounting screws.

    Our Technical Sales Team is available to help with the selection of our Model 7100A Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  34. Model 7514A Accelerometer

    Model 7514A Accelerometer

    Model: 7514A
    • +260°C Charge Output Accelerometer
    • 50pC/g output, 14kHz Bandwidth
    • Hermetically Sealed
    • Stud Mount, Side Connector

    Model 7514A Accelerometer

    The Model 7514A is a stud mounted piezoelectric charge mode accelerometer with an operating temperature range to +260°C. The accelerometer is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >14kHz with a nominal charge output of 50pC/g. The model 7514A features a hermetically sealed stainless steel housing and a #10-32 stud mount configuration.

    Our Technical Sales Team is available to help with the selection of our Model 7514A Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  35. General purpose bi-polar DC

    General purpose bi-polar DC

    Model: DC-EC


    •+/-1.25 to 250mm stroke length
    •Bi-polar DC LVDT
    •+/- 10 volt output
     

    General purpose bi-polar DC

    The DC-EC series is an extremely linear, low noise yet high frequency DC LVDT with stroke lengths 1.25mm to 250mm. Supply is nominal +/- 15 volts with +/- 10 volt output for general purpose use. High tolerance to vibration, shock and EMC, design temperature -55 to 95 Deg C. Options include captive core for easy installation, core connecting rods, mounting blocks and signal conditioners. Legacy brand is Schaevitz or Lucas Schaevitz.

  36. Temperature insensitive AC

    Temperature insensitive AC

    Model: M-12
    • 10 to 100mm stroke ranges
    • Low temperature coefficient of sensitivity
    • Excellent stroke to length ratio
    • Smooth transfer function

    Temperature insensitive AC

    The M-12 Series LVDT is wound on a ribless bobbin providing the smooth transfer function required for the most demanding materials testing and position feedback applications. Precision distribution, tapered layer windings provide excellent stroke to length ratio, with no sacrifice in sensor linearity. Design temperature -55 to 150 Deg C, options include metric core, core connecting rods, mounting blocks, signal conditioning. Legacy brand name Schaevitz or Lucas Schaevitz.

  37. Ultimate-Precision Digital LBB

    Ultimate-Precision Digital LBB

    Model: LBB
    •  High precision, 0.1% of reading or 1μm
    •  EMI and ESD protected (CE certified)
    •  Spring actuated probes
    •  Robust cast aluminum case (electronics)
    •  Stackable with T-Connectors for networking
    •  T-Connector available separately
    •  USB interface available (with COM libraries)
    •  Up to 31 devices on USB with external power
    •  External power supply available

    Ultimate-Precision Digital LBB

    The Ultimate-Precision Digital LBB system consists of DLBB digital probes (or gage heads) daisy chained in a network, using T-Connectors (available separately) with DE-9 connectors. Each DLBB includes a highly repeatable analog AC LVDT (Linear Variable Differential Transformer) probe guided with a precision linear ball bearing, mated to an in-line digital I/O signal conditioning module. The circuitry and firmware feature digital calibration and linearity correction of the digital output position signal with extremely high accuracy.

    The DLBB probes operate in conjunction with our available USB interface module. Our robust dimensional gaging probes are engineered to provide highly precise and repeatable measurements in various industrial, quality assurance and metrology applications.

    The system is based on an RS-485 half duplex, multi-drop network providing plug-and-play functionality. The DLBB probes convert their position signal into digital data which is then transmitted by the RS-485 network using asynchronous transmission (poll/response). The devices support both standard and buffered modes. Our USB 2.0 full speed compliant interface module connects to this network (using a T-Connector) to communicate with and allow data transfer to a computer. When our USB module is plugged into a computer running a WINDOWS® operating system, the Device Manager (in the section
    “Universal Serial Bus Controllers”) of the Computer Management Console displays the name “Meas-Spec Digital LBB Serial Converter”,
    clearly identifying our DLBB device amongst others.

    The available DLBB external power supply is capable of supplying 31 DLBB gaging probes (2 Amps). It features an integral T-Connector which is permanently attached to it. This special T-Connector will interrupt the bus power and switch it over to the external power supply, for all Digital LBB gaging probes connected downstream.

    Our Technical Sales Team is available to help with the selection of our Ultimate-Precision Digital LBB and Data Acquisition Systems. Use the enquiry button, call or email.

  38. AC Operated Gauge Heads

    AC Operated Gauge Heads

    Model: GCA
    • Hermetically sealed housing
    • 25 µ-inch [0.6 µm] repeatability
    • IEC IP68 rating to 1,000 PSI [70 bars]
    • Long strokes up to ±2 inches
    • Hardened tool steel contact tip
    • High side load resistance
    • Long cycle life
    • High temperature

    AC Operated Gauge Heads

    The GCA Series heavy-duty gage heads enable high performance in environments containing moisture, dirt, and fluid contaminants. Gage heads are spring loaded LVDTs (Linear Variable Differential Transformers) with precision linear bearings.

    These robust high-temperature gage heads allow measurements over long strokes up to ±2 inches [±50.8mm]. The spring force is typically 9oz [255 grams] at fully compressed electrical stroke. A removable black-chromed, hardened tool steel tip is threaded (4-48UNF-2A) to the working end. Internal construction prevents the core and shaft from rotating as they move longitudinally. The integral electrical connector (welded) provides for easy installation and allows replacing a damaged cable without sacrificing the sensor. Installation and adjustment are facilitated by an external ½-20 mounting thread and the two locknuts supplied with each unit.

    Like in most of our LVDTs, the GCA windings are vacuum impregnated with a specially formulated, high temperature, flexible resin, and the coil assembly is potted inside its housing with a two-component epoxy. This provides excellent protection against hostile environments such as high vibration and shock.

    The ruggedness, long life cycle, and very high reliability of the GCA Series provide a low cost of ownership over the life of the equipment onto which they are installed. The one-piece front end (barrel which contains the bearing assembly), machined from solid stainless steel bar, coupled with a bronze bushing, has far greater resistance to bending forces and side loads compared to other designs. This is particularly important on the longer stroke versions; it reduces the common risk of probe damage/bending during installation or maintenance of industrial equipment. The GCA Series designs also require fewer parts and weld joints, thereby increasing overall structural integrity and reliability.

    Our Technical Sales Team is available to help with the selection of our AC Operated Gauge Heads and Data Acquisition Systems. Use the enquiry button, call or email.

  39. General Purpose uni-polar DC

    General Purpose uni-polar DC

    Model: DC-SE
    • DC supply LVDT
    • Low power consumption
    • 2.5 to 150mm ranges available

    General Purpose uni-polar DC

    The DC-SE general purpose series -25 to 85 Deg C, operate on a single ended power supply 8.5 to 28VDC providing 0 to 5V or +1 to 6V output.  The output is also single ended over the full range displacement of the LVDT making the unit compatible with unipolar inputs on analog-to-digital converters and programmable logic controllers, etc. This is a low power consumption device suitable for battery powered applications, very linear performance and low noise. Ranges are available 2.5 to 150mm, options include metric or small diameter or guided cores, and mounting block, core connecting rods and signal conditioner accessories. Legacy brand is Schaevitz or Lucas Schaevitz.

  40. Industrial 0.15% OEM

    Industrial 0.15% OEM

    Model: U5100
    • 0-10K psi
    • -40° to 125°C range
    • V or mA output
    • Accuracy 0.75% 
    • CE compliance

    Industrial 0.15% OEM

    The U5100 series pressure transducers set a new price performance standard for demanding commercial and heavy industrial applications where high accuracy is required. This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids. Now replaced by U5200 new generation.

  41. Industrial 0.2% accuracy

    Industrial 0.2% accuracy

    Model: P700
    • 0-700 Bar (0-10K PSI)
    • -54° to 120°C range
    • mV, V or mA output
    • Accuracy 0.2%
    • Approval to Ex ia llc T4

    Industrial 0.2% accuracy

    The P700 Pressure Sensor is designed to withstand very high over pressures without failure whilst maintaining long term stability. Proven technology of a double cantilever beam with bonded foil strain gauges ensure excellent thermal isolation from the fluid or gas measured. Options include mVolt, with fast frequency response making them suitable for dynamic applications, or amplified outputs 4-20mA or voltage. Stainless steel as standard however optional Inconnel wetted parts and either cable or Mil Spec connector. The product is designed for heavy duty hydraulic pressures where there will be high overpressure or pressure spikes, Military or Commercial aircraft or Test Benches. The legacy brand name is Schaevitz, or Lucas Schaevitz. Refer to the P900 sensor if the application is new as this is an updated model.

  42. Industrial 0.1% accuracy

    Industrial 0.1% accuracy

    Model: P900
    • 0-700 Bar (0-10k psi) g or a
    • -54° to 150°C range option
    • mV, Volt or 4-20 mA output
    • Accuracy 0.1%
    • IP67 protection

    Industrial 0.1% accuracy

    Standard versions of this transducer use a 17-4 PH stainless steel diaphragm to sense pressure (Inconel wetted part versions are available for operation in highly corrosive environments). An all welded construction, deflection of the diaphragm is transferred to a double cantilever beam by a force transfer rod. Strain in the beam, and therefore input pressure, is measured by four foil strain gauges. Designed specifically to withstand high pressure spikes, pressure surges or high overpressure the sensor is available in various outputs including mV for dynamic pressure, voltage or current 4-20mA. The legacy brand name is Schaevitz or Lucas Schaevitz and has a proven record for in excess of 40 years. Special or customs designs are available upon request. Applications include test benches, steel or paper mills, military or commercial aircraft, research and development.

  43. Industrial Economy Pressure Transducer

    Industrial Economy Pressure Transducer

    Model: P1200
    • 0-700 bar (0-10K psi) g or a
    • -54 to 85°C range
    • mV, voltage or analogue output
    • Accuracy 0.15%
    • Stainless steel construction

    Industrial Economy Pressure Transducer

    The P1200 Series pressure transducers and transmitters provide high accuracy pressure measurement of liquids and gases.  These robust transducers combine hybrid electronics with highly reliable strain gauge sensing technology to offer superior performance in rugged applications. Constructed from media compatible 17-4 PH stainless steel, the P1200 provides exceptional performance in extreme environments where pressure spikes, over pressure or pressure hammer will be present. Legacy brand name is Schaevitz or Lucas Schaevitz and has a proven application track record for 40 years in test benches, military testing, research, development and commerical and military aircraft.

  44. Load Cell Tension and Compression

    Load Cell Tension and Compression

    Model: FN3000
    • Heavy duty pan-cake load cell
    • Strandard ranges 10kN to 1000kN [2 klbf to 200 klbf]
    • Very high stability
    • Aluminium or stainless steel
    • High IP protection available
    • High level output model with integrated Amplifier

    Load Cell Tension and Compression

    The FN3000 measures tension and compression in standard ranges from 0-10 kN to 0-1000 kN The mechanical design and gauge placement minimizes transverse effects. Depending on the range, the FN3000 is constructed in aluminium alloy or stainless steel and is available with numerous options. It is suitable for test bench applications and used in many hostile environments and can be customized for increased protection. 

    With many years of experience as a designer and manufacturer of sensors, TE CONNECTIVITY often works with customers to design or customize sensors for specific uses and testing environments.

    To meet your needs we also offer complete turnkey systems. The matched components (sensor, power, amplifier and digital display) are formatted, calibrated and ready for immediate use. 

    Our Technical Sales Team is available to help with the selection of our Load Cell Tension Compression and Data Acquisition Systems. Use the enquiry button, call or email.

  45. Load Cell with mechanical stops

    Load Cell with mechanical stops

    Model: FN3148
    • Ranges from 10 N to 2 000 N [2 lbf to 400 lbf]
    • S-Beam sensor in tension and compression
    • Combined linearity & hysteresis < 0.05% F.S.

    Load Cell with mechanical stops

    The FN3148 high precision load cell is protected against accidental overloads in tension and compression. 

    High-level outputs are available with amplifier A1 or A2 integration.

    For lower ranges, another sensor, model FN3280, can measure 0-1 N to 0-5 N [0.2 lbf to 1 lbf].

    To meet your needs we also offer complete turnkey systems. The matched components (sensor, power, amplifier and digital display) are formatted, calibrated and ready for immediate use.

    Our Technical Sales Team is available to help with the selection of our Load Cell with mechanical stops and Data Acquisition Systems. Use the enquiry button, call or email.

  46. Compression Miniature Load Cell

    Compression Miniature Load Cell

    Model: XFL212R
    • Ranges from 0-5 to 0-500N [0-1 to 100 lbf]
    • Extremely flat 3,5 mm [0.14"]
    • Diameter only 12 mm [0.49"]
    • Integrated spherical load button

    Compression Miniature Load Cell

    The XFL212R series is an extraordinarily thin miniature load cell with a temperature compensation module integrated into the output cable. This design allows TE CONNECTIVITY to manufacture extremely small sensors without sacrificing thermal zero and sensitivity performance.

    The XFL212R measures strain during compression in static and dynamic applications. Unlike sensors with flat force application surfaces, the XFL212R incorporates a spherical load button, which assures more precise loading and in return more accurate measurements. 

    The sensing element is fitted with a fully temperature compensated Wheatstone bridge equipped with high stability micro-machined silicon strain gages. The use of silicon strain gages optimizes its performance at low ranges and frequencies. The sensor is available in aluminum alloy or stainless steel, depending on the full scale range and can withstand considerable overloads.

    Our Technical Sales Team is available to help with the selection of our Compression Miniature Load Cell and Data Acquisition Systems. Use the enquiry button, call or email.

  47. Miniature Pressure Transducer

    Miniature Pressure Transducer

    Model: XPM4
    • Ranges 5 to 200 bars  [75 psi- 3 000 psi]
    • Absolute, sealed & gauge
    • Titanium device
    • Cable or connector output
    • Linearity up to ±0.35% F.S.

    Miniature Pressure Transducer

    The XPM4 is a miniature transducer designed to measure static and dynamic pressure under a wide variety of conditions, including hostile environments. The all-titanium construction and flush diaphragm protect the sensor against most corrosive environments.

    The XPM4 incorporates TE CONNECTIVITY’s cutting-edge SanShiftTM technology, which virtually eliminates zero shifts caused by installation torque. 

    The XPM4’s sensing element is a fully temperature compensated Wheatstone bridge configuration made with high stability micro-machined silicon strain gauges which optimize performance, especially at low ranges and high frequencies. 

    All models come with a cable output strengthened by a strain relief spring or with an electrical connector (optional).

    Our Technical Sales Team is available to help with the selection of our Miniature Pressure Transducer and Data Acquisition Systems. Use the enquiry button, call or email.

  48. Miniature Pressure Transducer

    Miniature Pressure Transducer

    Model: XPM6
    •  Ranges 100 to 1000 bars  [1.5k to 15k psi]
    • Sealed and gauge pressure reference
    • Stainless steel housing
    • Linearity ±0.25% F.S.

    Miniature Pressure Transducer

    The XPM6 is a miniature transducer made of stainless steel designed to measure static and dynamic pressure under a wide variety of conditions, including hostile environments.

    The XPM6’s sensing element is a fully temperature compensated Wheatstone bridge made with high stability micro-machined silicon strain gauges. For protection against thermal flash/explosive testing up to 1000 ° C [1832 ° F] the option MH allows inserting extra protection into the “H” shape diaphragm. 

    The XPM6 incorporates TE CONNECTIVITY’s cutting edge SanShiftTM technology, which virtually eliminates zero shifts caused by installation torque.

    Our Technical Sales Team is available to help with the selection of our Miniature pressure sensor and Data Acquisition Systems. Use the enquiry button, call or email.

  49. High Temperature Pressure Transducer

    High Temperature Pressure Transducer

    Model: FP1124
    • Easy installation
    • Built-in amplifier
    • With bleeder screw
    • Rugged construction
    • High temperature

    High Temperature Pressure Transducer

    The FP1124 Series of pressure transducers is designed specifically to measure pressure on the brake circuit, including ABS brake systems.

    With its rugged design and excellent thermal characteristics, the FP1124 is built to withstand high temperatures to fit most brake test applications. Additional IP67 protection and a bleeder screw ensure ease of use and long life even under severe environmental conditions. The sensor can be powered by a car battery and delivers direct high-level 0.5 to 5.5 Vdc output signal.

    TE CONNECTIVITY has many years of experience as a designer and manufacturer of sensing solutions to the automotive industry and can supply standard or custom sensors for specific uses and testing environments.

    Our Technical Sales Team is available to help with the selection of our High Temperature Pressure Transducer and Data Acquisition Systems. Use the enquiry button, call or email.