1. ESAM Traveller Static

    ESAM Traveller Static

    • 0.002 and 100 Samples/s channel
    • USB 2.0 interface 
    • High-speed 32-bit microcontroller.
    • EEPROM & FLASH-Memory
    • 3 internal trigger circuits 

    ESAM Traveller Static

    ESAM TRAVELLER Static is a high-performance signal conditioner/amplifier system mainly for static and quasi-static measurements in experimental stress analysis when medium or high numbers of input channels are required. The system accepts inputs from strain gauges in all common bridge configurations, from strain gauge based transducers, from potentiometers, and from general voltage sources.  It also accepts inputs from 4-bits digital signal sources

  2. CB004

    CB004

    • 10 kg to 100kg
    • Loadcell for platform weighing
    • OIML approved to 6000D

    CB004

    10 kg to 100kg
    Loadcell for platform weighing
    OIML approved to 6000D
    Platform size to 400 x 400 mm

  3. CB14

    CB14

    • 100kg to 300kg
    • Single point load cell for platform weighing
    • IOML certified

    CB14

    100kg to 300kg
    Single point load cell for platform weighing
    IOML certified

  4. Cb17

    Cb17

    • 600k to 3kg
    • Loadcell for small platform weighing
    • Platform size to 200 x 200 mm

    Cb17

    600k to 3kg
    Loadcell for small platform weighing
    Constant moment beam 
     

  5. UL

    UL

    • 2g to 100g
    • Very low universal force measurement
    • Accuracy 0.3%

    UL

    A low capacity, universal, bending beam loadcell.  

  6. Weldable strain gauges and Temperature sensors

    Weldable strain gauges and Temperature sensors

    • Rapid installation
    • Long term stability
    • Cable options

    Weldable strain gauges and Temperature sensors

    For ambient temperature range -40ºF to 180ºF.  The weldable strain gauge offers ease of installation in areas where conventional strain gauging may not be possible due to ambient conditions.

  7. Load Cell Amplifier 121/122

    Load Cell Amplifier 121/122

    A compact high accuracy analogue amplifier with current or voltage output

    Load Cell Amplifier 121/122

  8. Picoscope 4000 Series

    Picoscope 4000 Series

    The 4224 is a 2-channel version compatible with the industry standard IEPE accelerometers and microphones, making it suitable for a variety of measurement applications including noise vibration analysis.

    Picoscope 4000 Series

    The PicoScope 4000 Series PC Oscilloscopes are extremely versatile, with an oscilloscope and spectrum analyser included in every model.

    The 2-channel IEPE version is compatible with industry-standard IEPE accelerometers and microphones, making it suitable for a variety of measurement applications including noise vibration analysis.

    Convenience and speed

    The PicoScope 4000 Series scopes obtain their power from the USB 2.0 interface, so there’s no need for an external power supply. The USB port also delivers high-speed data to your PC to give you a responsive, high-resolution display. With 80 MS/s sampling, the 4000 Series scopes are the fastest USB-powered 12-bit scopes around.

  9. Capsule low pressure 19mm

    Capsule low pressure 19mm

    Model: 82
    • 0-1 to 0-500 psig or a
    • -40° to 125°C range
    • mV output
    • Accuracy 0.2%
    • Stainless steel

    Capsule low pressure 19mm

    The 82 series family is a 19mm small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. They are designed for o-ring mounting and OEM applications where compatibility with corrosive media is required. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. Refer to individual data sheets 82U (uncompensated), 82C (constant current) and 82CV (constant voltage) for more options and full technical specifications.

  10. Seatbelt Tension Loadcell

    Seatbelt Tension Loadcell

    Model: EL20-S458
    • Web Tension
    • 5KN to 25KN range
    • mV output
    • -40° to 120°C range
    • Seat belt testing

    Seatbelt Tension Loadcell

    The EL20-S458 provides a super low mass titanium structure to minimize F=MA errors during crash events.  The EL20-S458 is offered with optional ultra low mass slotted titanium axles and super robust armoured cable exit from the device.

    The low noise Wheatstone bridge consists of metal foil strain gages which provide full scale outputs of typically 2 mV/V of excitation. The EL20-S458 can be configured with a variety of options to fine tune the instrument to your application: select from several standard compensated temperature ranges, slotted or knurled axles, input voltages, lead lengths or specify unique combinations of these options. 

     

  11. Amplified Miniature 125 Deg C

    Amplified Miniature 125 Deg C

    Model: EB100
    • 0-10 to 0-350 bar absolute
    • -40° to 125°C compensated range
    • 0.5 to 4.5 amplified output
    • Accuracy 0.25%
    • EMI protection

    Amplified Miniature 125 Deg C

    The EB100 is a miniature pressure transducer with a 11mm diameter, light weight all stainless steel construction. Designed around motorsport or military applications, it has been tested for high vibration and shock with a temperature capability to 125 deg C. Standard pressure ranges start at 10 bar however special custom designs are available for 3 bar to 700 bar ranges (15 to 10000 psi). Process connections options include M5, M8 or 10-32 UNF. Applications include motorsport hydraulic, coolant, brake pressure, aerospace, defence, laboratory, research but also OEM high volume applications which require a very small size.

  12. DOG2 Inclinometer USB

    DOG2 Inclinometer USB

    Model: DOG 2 USB
    • Range ±25°, ±45° or ±90°
    • -40°C to +85°C temperature range
    • USB output
    • Accuracy to - 0.15°
    • High resolution

    DOG2 Inclinometer USB

    The Dual Axis Inclinometer is well suited for test and measurement purposes.  Its key features are: A fast response time, good accuracy and high resolution.  It features digital signal processing including temperature compensation for optomal performance. The integrated filter improves performance and allows use of the sensor in noisy environments (e.g. vibrations).

  13. Board mount OEM sensors

    Board mount OEM sensors

    Model: 1200 Series

     

    • 0-5" WC to 0-50 psi g or a
    • Board mounted with pins
    • Piezo resistive high stability
    • mV output
    • Temperature compensated

    Board mount OEM sensors

    The 1200 series is a familiy of temperature compensated, piezoresistive silicon pressure sensors packaged in a dual-in-line configuration. There are various pressure ranges available from 0-5 or 0-10" WC to 0-50 PSI gauge or absolute. Each is temperature compensated using a laser trimming process. There are variants which include constant voltage or constant current, and ultra high stability. Each of the data sheets are listed individually however contact us for further advise. Applications include hand held meters, medical gasses, vacuum measurement, leak detection, air duct flow.

  14. Six Axis Loadcell

    Six Axis Loadcell

    Model: FN 7325
    • 6 component load cell
    • 5 to 250KN range
    • mV or amplified output
    • -20° to 80°C range
    • 3 axis force & torque

    Six Axis Loadcell

    The multiaxial FN7325 measures force from 0-5  KN to 0-250 KN along three axes as well as the corresponding torque from 0-200 Nm to 0-7000 Nm. The FN7325 is simple to use and install and in many diverse applications circumvents the necessity of employing multiple single-axes units. 

  15. Capsule flush mount

    Capsule flush mount

    Model: 85
    • 0-15 to 0-500 psi gauge or abs
    • -20° to 125°C range
    • mV output
    • Accuracy 0.5%
    • Stainless steel

    Capsule flush mount

    The 85 Flush Mount is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 85 Flush Mount is designed for o-ring mounting where the diaphragm must not be shrouded by weld ring or fitting.  The sensing package utilizes silicon oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. A ceramic substrate is attached to the package that contains laser-trimmed resistors for temperature compensation and offset correction. An additional laser trimmed resistor is included which can be used to adjust an external differential amplifier and provide span interchangeability to within ±1%.

  16. Amplified high temperature

    Amplified high temperature

    Model: EPRB-1
    • 0-3 to 0-350 bar gauge or absolute
    • -40° to 150°C range
    • 0.5 to 4.5 output
    • Accuracy 0.25%
    • Small size 11mm diameter

    Amplified high temperature

    The EPRB-1 is a miniature static pressure transducer with a 11mm diameter, light weight all stainless steel construction. Designed around motorsport or military applications, it has been tested for high vibration and shock with a temperature capability to 150 deg C. Standard pressure ranges start at 3.5 bar however special custom designs are available from 1 bar to 700 bar ranges (15 to 10000 psi). Applications include motorsport, aerospace, defence, laboratory, research.  

  17. DOG2 Mems Series Inclinometer

    DOG2 Mems Series Inclinometer

    Model: DOG2
    • Range ±25°, ±45° or ±90°
    • -40°C to +85°C temperature range
    • Voltage output
    • Accuracy to - 0.15°
    • High resolution

    DOG2 Mems Series Inclinometer

    The Dual Axis Inclinometer is mainly developed with focus on platform leveling, dynamic engine management, tip-over protection and tilt alarm.

    A fast response time and good accuracy makes this device the ideal choice for mobile leveling applications. It features digital signal processing including temperature compensation. The integrated filter improves performance and allows to use the sensor in many noisy environments (e.g. vibrations)

  18. Horizontal port

    Horizontal port

    Model: MS4425
    • 0 - 1 to 0 - 300 psi
    • 0-100 mV output
    • Voltage excitation
    • Differential, gage and absolute
    • Temperature compensated

    Horizontal port

    The MS4425 is a temperature compensated pressure sensor in a dual-in-line pin configuration.  Horizontally mounted barbed ports allow connection with flexible tubing.

  19. FN2114

    FN2114

    • Compression
    • 200N to 2.5KN range
    • 1.5mV/V output
    • -20° to 80°C range
    • High accuracy

    FN2114

    The FN2114 load cell has been developed for pedal load testing. Its small size allows the sensor to be easily installed on the pedals of any vehicle or a fatigue/endurance test bench.

  20. Capsule small profile

    Capsule small profile

    Model: 86
    • 0-5 to 0-500 psi
    • -40° to 125°C 
    • mV output
    • Accuracy 0.5%
    • Stainless steel

    Capsule small profile

    The 86 family series is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 86 is designed for o-ring mounting and OEM applications where compatibility with corrosive media is required. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. There are 3 versions available, uncompensated, constant voltage and constant current in range 0-5 to 0-500 psi gauge or absolute. A vent tube option is also available should the sensor need to vent to atmosphere (in the case of tank level measurements) 

  21. Low pressure from 350mBar

    Low pressure from 350mBar

    Model: EPRB-2
    • 0.35 to 350 bar gauge or absolute
    • -40° to 150°C range
    • Amplified output
    • Accuracy 0.25%
    • Stainless steel 15mm dia

    Low pressure from 350mBar

    The EPRB-2 is a miniature pressure transducer with a 15mm diameter, light weight all stainless steel construction. Designed around military applications, it has been tested for high vibration and shock with a temperature capability to 150 deg C. Standard pressure ranges start at 350 mbar however special custom designs are available on request. Applications include motorsport, aerospace, defence, laboratory, research. 
     

  22. Dual Axis Inclinometer

    Dual Axis Inclinometer

    • ±30° Range
    • -40° to 85°C range
    • V or Digital output
    • Accuracy up to 0.1°
    • High resolution

    Dual Axis Inclinometer

    The AAL-Series conductive inclination sensor offers a fully calibrated inclination sensor module on a PCB. The sensor provides voltage output depending on the inclination angle and related to the specific axis, as well as a voltage based temperature output signal. An optional integrated e2-prom contains data on the characteristic curve resp. calibration data. This allows for a high integration into a specific application with excellent performance regarding accuracy and long-term stability.

  23. Vertical port

    Vertical port

    Model: MS4426

     

    • Vertical pressure port
    • 0-100 mV output
    • 0 -1 to 0 - 300 psi
    • Gage and absolute
    • Temperature compensated 

    Vertical port

    The MS4426 is a temperature compensated pressure sensor in a dual-in-line configuration with excellent performance and long-term stability.  1/16" barbed pressure port

  24. AccuStar

    AccuStar

    • ±60° Range
    • -25° to 60°C range
    • V output
    • Accuracy upto 0.1° 
    • CE certified

    AccuStar

    The AccuStar® Electronic Clinometer is an extremely accurate angle measurement device. This compact and rugged sensor is ideal where space is critical and environmental conditions are serious design concerns. The heart of the system is a patented, capacitance-based sensor with no moving parts. When rotated about its sensitive axis, this unique sensor provides an exceedingly linear variation in capacitance, which is electronically converted into angular data. The sensor and low-power CMOS electronics are encased in a rugged plastic housing ready to install as a system component or as a stand-alone device.

  25. Gear Lever Force Sensor

    Gear Lever Force Sensor

    • Gear lever force
    • 200N to 500N range
    • mV or amplified output
    • -20° to 80°C range
    • Aluminium Housing

    Gear Lever Force Sensor

    The FN7080 is installed in place of the original gear knob to measure the force required to change gear. Force can be measured in either 2 or 3 directions.

  26. Combined Pressure & Temp sensor

    Combined Pressure & Temp sensor

    Model: EPRB-3
    • 0-3 to 0-350 bar absolute
    • -40° to 150°C range
    • 0.5 to 4.5 Volt output
    • Accuracy 0.25%
    • Temperature probe PT1000

    Combined Pressure & Temp sensor

    The EPRB-3 is a miniature combined pressure and temperature transducer with a 12mm diameter, light weight all stainless steel construction. The temperature sensing is via a PT1000 which is directly in the media being measured, not embedded inside the sensor body. Designed around motorsport or military applications, it has been tested for high vibration and shock with a temperature capability to 150 deg C. Standard pressure ranges start at 3.5 bar however special custom designs are available for 1 bar to 700 bar ranges (15 to 10000 psi). Applications include motorsport, aerospace, defence, laboratory, research, automotive test. 
     

  27. Measuring Cell - Transducer

    Measuring Cell - Transducer

  28. Altimeter & barometer

    Altimeter & barometer

    Model: MS52XX
     
    • Low pressure 1-12 bar
    • -40 to +125C
    • Linearity to 0.15%
    • Silicon gel sealing
    • Small size, 7.6 x 7.6

    Altimeter & barometer

    The MS52XX SMD pressure sensor series is designed for pressure systems with the highest demands on resolution and accuracy. The device consists of a silicon micromachined pressure sensor die mounted on a 7.6 x 7.6 mm ceramic carrier protected by a metal cap. The MS52XX can be delivered in a highly-sensitive version giving a maximal output voltage or in a highly-linear version giving a linear output voltage directly proportional to the applied pressure. The MS5212-HM is a 12bar High-Linearity version dedicated for high-enduranceapplications.

  29. Diving Submersible

    Diving Submersible

    Model: MS54XX
    • 0-70 bar
    • -40° to 125°C range
    • High mV output
    • High accuracy
    • Gel sealing option

    Diving Submersible

    The MS54XX SMD pressure sensor series is designed for pressure sensor systems with highest demands on resolution and accuracy. The device consists of a silicon micromachined pressure sensor die mounted on a 6.2 x 6.4 mm ceramic carrier or a 6.1 x 6.3 mm PCB protected by a metal or plastic cap. The MS54XX can be delivered in a high sensitivity version giving a maximal output voltage or in a high linearity version. 

  30. AccuStar IP66

    AccuStar IP66

    • +/- 3.0º to +/-45° range
    • -25° to 60°C range
    • V or mA output
    • accuracy upto 0.1% 
    • IP66 protection

    AccuStar IP66

    The AccuStar® IP-66  is designed for rugged industrial and outdoor applications. The die-cast, powder coated aluminum housing is suitable for the most hostile environments. Multiple input / output configurations provide for ease of implementation into your application. When utilizing the 0.5 to 4.5 volt dc. output, the AccuStar® IP-66 may be operated on a standard automotive 12-Volt dc. electrical supply. The water tight enclosure is suitable for use in tower crane and marine applications, under all weather conditions. The 4 to 20 mA current output signal is ideal for machine control
    applications requiring long cable runs and provides for excellent noise immunity.

  31. Foot Pedal Loadcell

    Foot Pedal Loadcell

    • Compression
    • 500N to 2KN range
    • 2mV/V output
    • -20° to 80°C range
    • Pedal load cell

    Foot Pedal Loadcell

    The FN2570 load cell has been developed for pedal force testing. It attaches easily on all types of pedals and test rigs for endurance and fatigue tests, especially where size is an important factor. Strain is measured with high precision independent of the point of application of force. A strain relief spring strengthens the cable output.

  32. Miniature dynamic pressure sensor 5mm thread

    Miniature dynamic pressure sensor 5mm thread

    Model: XPM5
    Replaced by XP5

    Miniature dynamic pressure sensor 5mm thread

    The XPM5 is a miniature 5mm threaded transducer designed to measure static and dynamic pressure under a wide variety of conditions, including hostile environments. The product is flush mounted and constructed in Titanium for ultimate protection against corrosive media and designed for long term survivability. Frequency response is 20 to 160 kHz depending on the pressure range selected which are available from 0-10 (0-150 psi) to 0-350 (0-5000 psi) in either gauge, sealed gauge or absolute and standard output is 100mV full scale or amplified. The product benefits from having long term stability, so no zero shift and very low torque shift when fitting. Several options are available including cable or integral connector options, compensated temperature ranges, ingress protection to IP67. Applications can range from aerospace, test benches, explosive testing, brake pressure, research, laboratory. A true alternative to other product suppliers such as Kulite or GE sensing. NOTE this product has recently been upgraded, please see XP5 new data sheet.

  33. Measuring Cell - Polynom Transducer

    Measuring Cell - Polynom Transducer

  34. DPL/DPN Series

    DPL/DPN Series

    • +/-2° up to +/-30° range
    • -40° to 85°C range
    • Digital or V output
    • 0.001° resolution
    • RS232 ouput

    DPL/DPN Series

    The DPL/DPN-Series is modern SMD technology based small board-level dual axis inclinometer applying conductive technology. A high-speed microcontroller implements linearization and temperature compensation routines, thus providing excellent accuracy over the full operating temperature range. The DPL / DPN series inclinometer is available with both fully compensated digital output TTL/RS 232 and/or analogue voltage output 0.3 to 4.7V.
    A programmable digital software filter allows the reduction of shock- and vibration influences during operation for optimal measurement results.

  35. CANopen Automotive

    CANopen Automotive

    Model: 9000
    • 0-1 to 0-690 bar g or a
    • Operating -40° to 85°C
    • Canbus output
    • Accuracy 0.1%
    • Software supplied

    CANopen Automotive

    The 9000 Series CANbus pressure transducer is primarily used for automotive test benches and research. The sensor is fully configurable via the data sheet with options such as pressure range from 1 to 690 bar, pressure reference in absolute, gauge or sealed gauge, process thread and electrical connections. Also available with Inconel wetted parts for corrosive media. Standard application interface CANopen DS301 & DSP404. Comes with software as standard. Address codes can be modified on request should this be ued to replace another sensor manufacturers part.  

  36. Minature dynamic 10mm thread

    Minature dynamic 10mm thread

    Model: XPM10
    • 0-1 to 0-350 bar gauge or absolute
    • -40° to 150°C range
    • mV or amplified output
    • Accuracy 0.25%
    • Stainless steel or titanium

    Minature dynamic 10mm thread

    The XPM10 is a miniature 10mm threaded transducer designed to measure static and dynamic pressure under a wide variety of conditions, including hostile environments. The product is flush mounted and constructed in Titanium or stainless steel for ultimate protection against corrosive media and designed for long term survivability. Frequency reposnse is 4 to 40 kHz depending on the pressure range selected which are available from 0-1 (0-15 psi) to 0-350 (0-5000 psi) in either gauge, sealed gauge or absolute and standard output is 100mV full scale however amplified options are available. The product benefits from having long term stability, so no zero shift and very low torque shift when fitting. Several options are available including cable or integral connector options, compensated temperature ranges, ingress protection to IP67. Applications can range from aerospace, test benches, explosive testing, research, laboratory however custom product is available for high radiation or other unusual uses. A true alternative to other product suppliers such as Kulite or Endevco.

  37. Board mountable OEM low cost pressure sensor

    Board mountable OEM low cost pressure sensor

    Model: MS1451
    • 0-5 to 0-500 psi g or a
    • -40° to 125°C range
    • 0-60mV output
    • 0.25% accuracy
    • Board mountable SMD

    Board mountable OEM low cost pressure sensor

    The MS1451 is a piezoresistive silicon pressure sensor packaged in a surface mount configuration in ranges from 0-5 to 0-500 psi gauge or absolute. It is intended for high volume applications where small size, light weight, low cost, and compatibility with automated assembly equipment are required. The pressure sensor is available with a gage or absolute pressure sensing chip that is attached to a surface mountable ceramic substrate. A plastic cap is attached to the ceramic substrate, protecting the chip and providing the pressure port.

  38. DPG Series

    DPG Series

    • +/-5° to +/-30° range
    • -40°C to 85° range
    • RS232 or V output
    • 0.001° resolution
    • IP67/68 protection

    DPG Series

    The DPG-Series dual axis conductive inclinometer in aluminum housing offers the user modern microprocessor technology with an integrated active linearization and temperature compensation. This inclinometer is full calibrated, easy to horizontal mount and absolute plug and play compatible.

  39. Heavy Duty 0.25% OEM

    Heavy Duty 0.25% OEM

    Model: 3100 and 3200
    • 0-3.5 to 0-2200 bar g
    • -40° to 125°C range
    • Output options
    • Accuracy 0.25%
    • Compact size

    Heavy Duty 0.25% OEM

    Test & Measurement or OEM Industrial use pressure sensor, this sensor is packed full of options available on a quick delivery. 17-4 PH stainless steel construction with many optional process and electrical connections available at an excellent price/performance ratio. Features include compact size, unique thin film sensing technology, integral electrical connectors and many process connection threads. Ulitmately a fit and forget product at the right cost. Ranges from 0 to 3.5 bar g to 0-2200 bar g, 0.25% accuracy and 125 Deg c compensated temperature. Get performance, reliability and long term stability at the right price.
     

  40. DQG Series

    DQG Series

    • +/-25° range
    • -40° to 85°C range
    • V, mA or RS232 output 
    • upto 0.01° resolution
    • IP66 protection

    DQG Series

    The DQG-Series is a small inclinometer based on dual axis tilt sensor for horizontal mounting, which works based on the conductivity principle. This microprocessor controls the inclinometer with a linearized and temperature compensated angle output signal. The unit has metal housing and exhibits an 8…30VDC power supply.

  41. Low Range to 16 bar

    Low Range to 16 bar

    Model: GEMS 3500
    • 0-1 to 0-16 Bar G or A
    • Voltage output options
    • -40 to +125C
    • Accurancy 0.25%
    • Many port options

    Low Range to 16 bar

    Compact, low range of pressure sensors with a wide variety of integral electrical and pressure connections available. Aimed at small to medium OEM applications, features include output options 0-5V, 0-10V, ratiometric, 4-20mA and electrical options such as M12, Deutsch DT04-4P, industrial DIN, Packard and sealed to IP67 and vibration and shock rated. Can be supplied in either gauge, absolute or compound pressure ranges. Operating temperatures -40 to 125 Deg C. Particularly suited to Motorsport based applications as well as general industrial.

  42. G Series

    G Series

    • +/-10° range
    • -25 ro 85°C range
    • Switch output
    • 0.25% accuracy
    • IP67 protection 

    G Series

    The G-Series consist of a single axis conductive tilt sensor on a modern technology in environmentally protected and robust aluminum housing. The fast microcontroller works with a linearization and temperature compensation routines. This fully calibrated inclinometer offers a switch output signals. The inclination switch enables the angle of inclination of objects such as appliances, machines or motor vehicles to be monitored and emits an alarm signal when the angle is exceeded. The switch threshold can be set symmetrically by the customer in a range of +/-10°.

  43. P Series

    P Series

    • +/-5° to +/-45° range
    • -25° to 85°C range
    • Digital and V ouput
    • upto 0.01° range
    • IP65 protection rating

    P Series

    The P-Series of conductive inclinometers offers modern technology in an environmentally protected and robust aluminium housing in IP class 65. The inclinometer achieves high accuracy over a wide temperature range. All P-type inclinometers are microprocessor controlled transducers capable of producing a linearized  RS-232 digital and analog voltage +/-1.5V or current output 4…20 mA signal. The inclinometers are an ideal choice for a variety of industrial, automotive and aerospace applications.

  44. INN-202

    INN-202

    • Navigation performance – 80μg Bias Repeatability
    • High Input Range (50g)
    • High stability
    • Analog output
    • Compact design

    INN-202

    INNALABS’ INN-202 navigation-grade accelerometers are used in both commercial and military applications such as strap-down inertial navigation systems for aircraft, marine, land and other applications.

  45. V Series

    V Series

    • +/-5° +/-15° and +/-45°
    • 0-70°C range
    • 4-20mA or V output
    • 1.5% non linearity
    • IP65 protection

    V Series

    The V-Series of conductive single or dual axis inclinometers offers a modern electronic in an environmentally protected and robust aluminium anodizing housing.This fully calibrated  inclinometer is available with an analogue voltage output signals or current output signal.

  46. INN-203

    INN-203

    • Tactical performance – 200μg Bias Repeatability
    • High Input Range (50g)
    • High stability under temp changes
    • Analog output
    • Compact design

    INN-203

    INNALABS’ INN-203 tactical-grade accelerometers are used in both commercial and military applications such as strap-down inertial navigation systems for aircraft, marine, land and other applications. Excellent performance of these accelerometers is achieved owing to proven quartz flexure technology.

  47. INN-204

    INN-204

    • Tactical performace
    • High stability
    • High Input range
    • Analog output
    • compact design
    • No export license required

    INN-204

    INNALABS’ INN-204 tactical-grade accelerometers are used in both commercial and military applications such as strap- down inertial navigation systems for aircraft, marine, land and other applications. Excellent performance of these accelerometers is achieved owing to proven quartz flexure technology. Implementation of the latest advances in technology and economy of scale enable us to set lower price compared to other analogue accelerometers.

  48. D Series

    D Series

    • +/-5° +/-15° and +/-30°
    • -40-85°C range
    • mA, V or RS232 output
    • 0.04° Accuracy
    • CE Approved

    D Series

    This inclinometer achieves high accuracy over a wide temperature range. The fast microcontroller works with a linearization and temperature compensation routines. With it's rugged housing and IP67 protection. This device is easy to use and very user configurable. 

  49. Anglestar protractor System (APS)

    Anglestar protractor System (APS)

    • 20° to 90° range
    • upto 0.01° resolution
    • Battery or Mains supply
    • Stand alone system
    • Low power consumption

    Anglestar protractor System (APS)

    The Anglestar® Protractor System (APS) is a ready to use, stand alone system for angle measurements. The system incorporates a special AccuStar I ratiometric electronic clinometer, a digital display, and a standard four foot cable.

    This system will operate for over 1,000 hours on one 9 volt battery and may be powered from an external power source between 9 and 15 Vdc, drawing minimal current.

  50. INN-205

    INN-205

    • Tactical performace
    • Temperaure stability 
    • Analog output
    • No export licenses

    INN-205

    Implementation of the latest advances in technology enables us to set lower price compared to other analogue accelerometers. Another substantial advantage is the fact that INNALABS does not require export licenses, so the purchasing process is very fast and hassle-free. These factors make INN-205 the No1 accelerometer on the middle-accuracy accelerometers market today.

  51. Capsule miniature HP

    Capsule miniature HP

    Model: 89
    • 0-1k to 0-10K psi g or a
    • -40° to 125°C range
    • mV output
    • Accuracy 0.25%
    • Stainless steel

    Capsule miniature HP

    The 89 series is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing featuring 5/16-32 UNEF threads and can be welded in place. The 89 is designed for high pressure OEM applications where compatibility with corrosive media is required. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. There are 3 versions available, uncompensated, constant current and constant voltage with ranges 0-1000 psi to 0-10000 psi (on request). Each unit can be fitted with a process connection thread as per data sheet options.

  52. Capsule ratiometric output

    Capsule ratiometric output

    Model: 86A
    • 0-1 to 0-150 psi g
    • -20° to 85°C range
    • 0.5 to 4.5 Ratiometric output
    • Accuracy 0.25%
    • Stainless steel wetted parts

    Capsule ratiometric output

    The 86A is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 86A is designed for o-ring mounting. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element.  The 86A is designed for high performance, low pressure gauge pressure applications. A custom ASIC is used for temperature compensation, offset correction and provides an amplified output of 0.5 to 4.5V. A vent tube port is fitted on the rear to allow applications such as liquid level measurement, level control, gas pressure, diesel fuel level and OEM equipment.

  53. Basic 0.5% accuracy

    Basic 0.5% accuracy

    Model: 1200 and 1600
    • 0-1 to 0-400 bar g
    • -40° to 125°C range
    • V or mA output
    • Accuracy 0.5%
    • High overrange

    Basic 0.5% accuracy

    The 1200 series pressure transducer features stability and toughness via its CVD and ASIC design coupled with a thicker diaphragm. The thicker diaphragm enables these pressure transducer sensors to survive most pressure spikes caused by pump ripple, solenoid valves, etc. Fully configurable from the data sheet with options such as 4-20mA, 0-5, 0-10V output and available on quick lead times and UK manufactured. The 1600 series extends the packaging options by providing an all welded stainless steel back end for demanding industrial applications. A modular design allows special ordering of fittings, electrical cables, etc. for OEM applications. The ASIC and CVD technology enables Gems™ to offer almost any output over any pressure range.
     

  54. Quick delivery industrial

    Quick delivery industrial

    Model: 2200 and 2600
    • 0-0.5 to 0-400 bar g, c, a
    • -40° to 125°C range
    • mV, volts or 4-20mA output
    • Accuracy 0.25%
    • IP68 Submersible options

    Quick delivery industrial

    The 2200/2600 series pressure transducer features stability and accuracy in a variety of enclosure options. The 2600 extends the packaging options via an all welded stainless steel back end for demanding submersible and industrial applications. The 2200 and the 2600 pressure transducers feature proven CVD sensing technology, an ASIC (amplified units), and modular packaging to provide a sensor line that can easily accommodate specials while not sacrificing high performance. The modular concept allows fast delivieries of almost any configuration off the data sheet. Standard material is 17-4 PH stainless steel, accuracy 0.25%, and 125 degrees C temperature. The 2600 is the submersible option, triple sealed for long life for water measurement. Typical applications include OEM, HVAC, Refrigeration, water pressure measurement.

  55. High Stability

    High Stability

    Model: 4700 Series
    • 0-0.5 to 0-700 bar g or a
    • -30° to 100°C range
    • 4-20mA  output
    • Accuracy 0.1%
    • Atex, marine approved

    High Stability

    The 4700 series provides precise laboratory type measurements in a rugged industrial package complete with a 5:1 turndown capability. 4-20mA as standard and configurable electical and process connection threads via the data sheet including submersible options. Exceptional levels of stability and other performance specifications are achieved by using a sputtered sensing element, which achieves a molecular fusion of a strain gauge material, an insulating material, and the 17-4 PH SS sensing element. Available as both submersible or general use product both ABS Marine, Atex Exia approvals availble in packages IP68, Inconnel wetted parts and Absolute or Gauge reference. Typical application include Ships/Boats, Waste Water, Sea Water Level and Laboratory. 

  56. Low Pressure Multi-Purpose

    Low Pressure Multi-Purpose

    Model: 5000
    • 25mBar to 1000mBar
    • -40° to 100°C range
    • V or mA  output
    • Accuracy 0.2%
    • High overload capability

    Low Pressure Multi-Purpose

    The 5000 series is general purpose marine approved sensor for demanding applications including high overrange needs. Wetted parts are duplex stainless steel and ceramics suitable for the toughest applications including sea water, for diesel special Hytrel cable is available as a no cost option. Pressure ranges start from 25 to 1000 mBar, has a Zero/Span 3:1 turndown capability. Both ATEX Exia and Lloyds Marine approvals are available. With multiple output options including 4-20mA, 0-5 VDC this is a multi-purpose sensor for both general and submersible IP68 applications. Typical applications include water or diesel depth, tank level measurements for Marine applications.

  57. Amplified low range

    Amplified low range

    Model: MS4515
    • 0 to 2" to 0 to 30"WC gauge or diff 
    • Amplified analogue output 
    • PCB surface or through mount
    • Barbed ceramic pressure ports
    • Total error band 1%

    Amplified low range

    The MS4515 is the latest in developments for piezo resistive board mount sensors. There are several mounting options such a 'J' type SMD for solder reflow processes or pin versions fitting through the PCB. Pressure port configuration options are also available to ensure the best posible alignment. Output is analogue ratiometric proportional to the supply voltage and ranges 0-2" WC to 0 to 30" WC in gauge or differential pressure. Options are available such as gel coating for protection against high humidity. A digital output variant is also available. Applications include medical gasses, air duct flow, calibrators, hand held meters, air speed measurement.

  58. Digital low range

    Digital low range

    Model: MS4515DO
    • •0 - 2" to 0 - 30"WC gauge or diff
    • •Digital I2C or SPI output
    • •PCB surface or through mount
    • •Barbed ceramic pressure ports

    Digital low range

    The MS4515 is the latest in developments for piezo resistive board mount sensors. There are several mounting options such a 'J' type SMD for solder reflow processes or pin versions fitting through the PCB. Pressure port configuration options are also available to ensure the best posible alignment. Output is digitally based I2C or SPI protocol and ranges 0-2" WC to 0 to 30" WC in gauge or differential pressure. Options are available such as gel coating for protection against high humidity. An analogue output variant is also available. Applications include medical gasses, air duct flow, calibrators, hand held meters, air speed measurement.
     

  59. Amplified med-high range

    Amplified med-high range

    Model: MS4525
    • 0-1 to 0-150 psi g,a,c,d
    • -25° to 105°C range
    • Amplified ratiometric output
    • 0.25% accuracy
    • 3.3/ 5.0 Vdc supply

    Amplified med-high range

    The MS4525 is the latest in developments for piezo resistive board mount sensors. There are several mounting options such a 'J' type SMD for solder reflow processes or pin versions fitting through the PCB. Pressure port configuration options are also available to ensure the best posible alignment. Output is analogue ratiometric proportional to the supply voltage and ranges 0-1 to 0 to 150psi in gauge, absolute, compound or differential pressure. Options are available such as gel coating for protection against high humidity. A digital output variant is also available. Applications include medical gasses, air duct flow, calibrators, hand held meters, air speed measurement.
     

  60. Digital med-high range

    Digital med-high range

    Model: MS4525DO
    • PCB Mount Digital Transducer
    • Temperature and Pressure
    • I2C or SPI Protocol
    • Differential, Gage, Absolute & Compound

    Digital med-high range

    The MS4525DO is the latest in developments for piezo resistive board mount sensors. There are several mounting options such a 'J' type SMD for solder reflow processes or pin versions fitting through the PCB. Pressure port configuration options are also available to ensure the best posible alignment. Output is digital I2C or SPI 14 bit and ranges 0-1 to 0 to 150 psi in gauge, absolute, compound or differential pressure. Options are available such as gel coating for protection against high humidity. An analogue output variant is also available. Applications include medical gasses, air duct flow, calibrators, hand held meters, air speed measurement.
     

  61. Atmospheric pressure data analysis

    Atmospheric pressure data analysis

    Model: MS5607-02BA03
    • 10-1200mbar
    • -40° to 85°C range
    • Accuracy 1.5mbar
    • Low power, 1 µA 
    • SPI and I2C outputs

    Atmospheric pressure data analysis

    The MS5607-02BA is a new generation of high resolution altimeter sensors from MEAS Switzerland with SPI and I2C bus interface. It is optimized for altimeters and variometers with an altitude resolution of 20 cm.

  62. DL/Ex

    DL/Ex

    Model: DL/Ex
    • 100 mbar…1000 bar
    • Accuracy: ≤ ± 0.10 % FS
    • Operating temp: -40…85 °C
    • Process temp: -40…100 °C
    • Interface: RS232
    • ATEX approval

    DL/Ex

    Battery operation, Measurement interval 2s…24h, 130'000 Measurement values. ATEX approved for use in hazardous areas, eg landfill, fuel tanks.

  63. Crash Test Dummy Accelerometer

    Crash Test Dummy Accelerometer

    Model: 64L
    • 0-6000g range
    • 0 to 50°C range
    • mV output
    • Up to 4500Hz
    • Auto safety accelerometer

    Crash Test Dummy Accelerometer

    The Model 64L accelerometer is based on an advanced piezoresistive MEMS sensing element offering exceptional dynamic range and stability. It is also compliant with SAE J211 standards for anthropomorphic dummy instrumentation.  The Dynamic range for this model is +/- 50, 100, 200, 500, 2000 or 6000g.

  64. 1201F Accelerometer

    1201F Accelerometer

    Model: 1201F
    • 0-1000g range
    • -20 to 85°C range
    • mV output
    • Up to 3000Hz
    • Overload stops

    1201F Accelerometer

    The Model 1201F accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing.  Its mechanical overload stops provide high shock protection in rugged applications. This sensor is easily mounted in hard to get places on vehicles under test.  The Dynamic range for this model is as follows: +/-50, 100, 200, 500, or 1000g.

  65. EGAXT Accelerometer

    EGAXT Accelerometer

    Model: EGAX-EGAXT
    • 0-2500g range
    • -40 to 120°C range
    • mV output
    • Up to 3000Hz
    • Low mass

    EGAXT Accelerometer

    The Model EGAXT miniature accelerometers combine a damping ratio of 0.7 (Nominal) with built-in over-range stops that protect the unit against 10,000g shocks. This is ideal for applications which may experience rough handling or in situations where the accelerometer must survive a high initial overload in order to make a low g measurement. The Dynamic Range for this model is: +/- 5, 10, 25, 50, 100, 250, 500, 1000 or 2500g.

  66. EGAXT3 Accelerometer

    EGAXT3 Accelerometer

    Model: EGAXT3
    • 0-2500g range
    • -40 to 120°C range
    • mV output
    • Up to 3000Hz
    • DC response

    EGAXT3 Accelerometer

    The Model EGAXT3 miniature triaxial accelerometer combines a damping ratio of 0.7 (Nominal) with built-in over-range stops that are set to protect the unit against 10,000g shocks. This is ideal for applications which may experience rough handling or in situations where the accelerometer must survive a high initial overload in order to make a low g measurement. These units feature a Wheatsone Bridge output with compensated temperature range of 20 to 80 °C.  The Dynamic Range for this model is: +/-5, 10, 25, 50, 100, 250, 500, 1000 or 2500g.

  67. 4000A/4001A Accelerometer

    4000A/4001A Accelerometer

    Model: 4000A & 4001A
    • 0-200g range
    • -20 to 85°C range
    • Amplified output
    • Up to 1500Hz
    • Rugged

    4000A/4001A Accelerometer

    The Model 4000A & 4001A are economical signal conditioned accelerometers with integral temperature compensation. The accelerometers incorporate a 3rd generation silicon MEMS sensor providing outstanding performance. The accelerometers are packaged in a rugged aluminum housing ideal for transportation and instrumentation testing. The Dynamic Range for this model is: +/- 2, 5, 10, 20, 50, 100 or 200g.

  68. Miniature Titanium Accelerometer

    Miniature Titanium Accelerometer

    Model: 7102A
    • 0-2000g range
    • -55 to 125°C range
    • V output
    • Up to 11KHz
    • Titanium body

    Miniature Titanium Accelerometer

    The 7102A accelerometer features a welded hermetic titanium construction with an M3 connector. The miniature and light weight titanium package makes the accelerometer ideal for applications requiring minimal mass loading.  The Dynamic Range for this model is: +/-50, 500 or 1000g.

  69. EGAS3 Accelerometer

    EGAS3 Accelerometer

    Model: EGAS3
    • 0 to 2500g range
    • -40 to 120°C range
    • mV output
    • Up to 3500Hz
    • Triaxial

    EGAS3 Accelerometer

    The Model EGAS3 is a cube-shaped, triaxial accelerometer. Operating from 15 Vdc, this unit features a transverse sensitivity of 2% MAX and damping of 0.7. Over-range stops ensure survivability of the unit under extreme shock conditions while its temperature performance offers a minimal zero shift.  The Dynamic Range for this model is: +/-5, 10, 25, 50, 100, 250, 500, 1000 or 2500g.

  70. EGAS Accelerometer

    EGAS Accelerometer

    Model: EGAS
    • 0-2500g range
    • -40 to 120°C range
    • mV output
    • Up to 3500Hz
    • Damping Ratio 0.7

    EGAS Accelerometer

    The Model EGAS is a miniature, uniaxial accelerometer. The EGAS is the unit of choice for measurement professionals in the automotive, military, aerospace and transportation industries. Its combined nonlinearity and hysteresis of +/- 1% makes the EGAS well-suited for on-site testing as well as laboratory use.  The Dynamic Range for this model is: +/- 5, 10, 25, 50, 100, 250, 500, 1000 or 2500g.

  71. Triaxial Accelerometer

    Triaxial Accelerometer

    Model: 201
    • 0-50g range
    • -40 to 125°C range
    • mV output
    • Up to 4000Hz
    • Damping ratio 0.7

    Triaxial Accelerometer

    The Model 201 is a low noise accelerometer offering both static and dynamic response. The accelerometer is packaged in an anodized aluminum housing with an integral cable.

  72. 52 Accelerometer

    52 Accelerometer

    Model: 52
    • 0-2000g range
    • -40 to 90°C range
    • mV output
    • Up to 7000Hz
    • Auto safety accelerometer

    52 Accelerometer

    The Model 52 accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit features a full bridge output configuration.

  73. Bolt on Accelerometer

    Bolt on Accelerometer

    Model: 3058
    • 0-100g range
    • -40 to 125°C range
    • overload stops
    • Up to 1500Hz
    • Gas damped

    Bolt on Accelerometer

    The 3058 is a piezoresistive silicon accelerometer with integral temperature compensation. It is packaged on a ceramic substrate with a metal bracket which can be used to bolt the sensor to the mounting location.  Applications include motion control, impact & shock testing for transpotation and machinery.

     

  74. High Temperature Accelerometer

    High Temperature Accelerometer

    Model: 7204A
    • 0-500g range
    • -55 to 130°C range
    • Amplified mV output
    • Up to 15000Hz
    • Through hole mount

    High Temperature Accelerometer

    The 7204A is a case isolated high temperature IEPE accelerometer with internal shielding.  It has a flat bandwidth up to greater than 15kHz with a resonant frequency greater than 40kHz.  The stainless steel hermetically sealed case has a biult in connector for the two wire connection.  The Dynamic Range for this model is: +/-10, 50 or 500g.

  75. 4610 Accelerometer

    4610 Accelerometer

    Model: 4610
    • 0-500g range
    • -40 to 120°C range
    • Amplified output
    • Up to 3500Hz
    • Gas damped

    4610 Accelerometer

    The Model 4610 is a low noise signal conditioned accelerometer with exceptional long-term stability. The accelerometer offers integral temperature compensation and a hermetically sealed sensor assembly. The Model 4610 incorporates mechanical overload stops that provide shock protection to 10,000g. The 3rd generation MEMS element incorporates gas damping that offers a wide dynamic range and stable frequency response.  The Dynamic Range for this model is: +/-2, 5, 10, 20, 50, 100 or 200g.

  76. Triaxial Board Mount Accelerometer

    Triaxial Board Mount Accelerometer

    Model: 832
    • 0-500g range
    • -20 to 80°C range
    • Hermetically sealed
    • Up to 2000Hz
    • Low power - 4 microA

    Triaxial Board Mount Accelerometer

    The Model 832 is a low cost, board mountable triaxial accelerometer. It incorporates power and signal conditioning with a maximum current consumption of 4 micro-amps. The Dynamic range for this model is +/- 25, 50, 100, 200 or 500g.

  77. High Temperature Triaxial Accelerometer

    High Temperature Triaxial Accelerometer

    Model: 832M1
    • 0-500g range
    • -40 to 125°C range
    • mV output
    • Upto 6000Hz
    • Board mount

    High Temperature Triaxial Accelerometer

    The Model 832M1 is a low cost, board mountable triaxial accelerometer.  It incorporates full power and signal conditioning with a maximum current consumption of 22 micro-amps.  The Dynamic range of this model is +/- 25, 50, 100, 200 or 500g.

  78. Miniature Surface Mount Accelerometer

    Miniature Surface Mount Accelerometer

    Model: 3031
    • 0-100g range
    • -40 to 125°C range
    • Weight 0.3g
    • Upto 1500Hz
    • Overload stops

    Miniature Surface Mount Accelerometer

    The Model 3031 is a piezoresistive SMD accelerometer designed for demanding  applications. The MEMS accelerometer is  a miniature light weight accelerometer with outstanding performance and long-term stability. The accelerometer provides a millivolt output signal and features mechanical overload stops that provide shock protection to 5,000g.   Applications include vibrationa and shock monitoring for machinery and transortation.

  79. Industrial 0.05% accuracy

    Industrial 0.05% accuracy

    Model: P9000
    • 0-700 bar (0-10K psi) 
    • -40° to 100°C range
    • Voltage or current output
    • Accuracy 0.05%
    • Digital compensation

    Industrial 0.05% accuracy

    The P9000 Series is a range of advanced, digitally compensated pressure transducers. The unique design of the P9000 pressure transducer utilizes the proven reliability of strain gauge technology and innovative digital compensation electronics. With mechanical overtravel stops, the unit is designed for extreme environment applications where pressure spikes or pressure surges will occur. Applications include test benches, steel mills, paper mills, military or commercial aircaft, military testing. Legacy brand name in Schaevitz or Lucas Schaevitz.

  80. High Temperature Triaxial Accelerometer

    High Temperature Triaxial Accelerometer

    Model: 7530A
    • 0-4000g range
    • -73 to 200°C range
    • Charge mode
    • Up to 6000Hz
    • Miniature triaxial

    High Temperature Triaxial Accelerometer

    The 7530A is a triaxial piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. The accelerometer incorporates three independent annular shear mode crystal assemblies.  The annular shear crystals also provide a stable thermal response up to +200C and a nominal charge output of 5.6pC/g which offers optimum signal to noise ratio.  The Dynamic Range for this model is +/-4000g.

  81. Miniature Adhesive Mount Accelerometer

    Miniature Adhesive Mount Accelerometer

    Model: 7108A
    • 0-500g range
    • -55 to 125°C range
    • V output
    • Up to 10KHz
    • Miniature IEPE

    Miniature Adhesive Mount Accelerometer

    The 7108A is a miniature adhesive mount IEPE accelerometer.  It features a welded hermetic stainless steel construction with a 10-32 top connector. The model 7108A incorporates a stable piezo-ceramic crystal in annular shear mode, installed with a compression ring that eliminates the usage of epoxies that can affect long term stability. The accelerometer has an operating range of -55°C to +125°C and a flat frequency response to 10kHz.  The Dynamic Range for this model is +/-50 or 500g.

     

  82. UT

    UT

    • 100g to 2kg
    • Low universal force measurement
    • High accuracy

    UT

    The UT is a robust, high accuracy loadcell with a low profile.  

  83. Compact 1000 bar

    Compact 1000 bar

    Model: P101
    • 0-1000 bar (0-15k psi) gauge
    • -20° to 150°C range
    • mV or voltage output
    • Accuracy 0.3%
    • Stainless steel diaphragm

    Compact 1000 bar

    The P101 is a compact pressure transducer only 32mm long and designed to measure pressure under a wide variety of conditions, including hostile environments and temperatures up  to 150 °C. Its stainless steel diaphragm and sealing options render the P101 ideal for use in chemically aggressive environments, such as Skydrol® aviation hydraulic fluid or areas where space is at a premium. Can be used for both static and dynamic applications.

  84. Miniature Triaxial Accelerometer

    Miniature Triaxial Accelerometer

    Model: 7131A
    • 0-2000g range
    • -55 to 125°C range
    • V output
    • Up to 9000Hz
    • Miniature triaxial

    Miniature Triaxial Accelerometer

    The accelerometer features a hermetically sealed Titanium construction with a 4-pin Microtech connector interface. The model 7131A incorporates stable piezo-ceramic crystals in annular shear mode which provide a flat frequency response up to >10kHz.  The Dynamic Range for this model is: +/-50, 100, 200, 500 or 2000g.

  85. Surge protected

    Surge protected

    Model: ATM/K
    • 0-100mbar to 0-20 bar g or a
    • -40° to 125°C range
    • Analogue output
    • Accuracy 0.25%
    • Surge protection, ceramic transducer

    Surge protected

    The ATM/K pressure transmitter is a compact and robust 316L stainless steel assembly contining a capacitive ceramic sensor without oil fill. Available to 20 bar in gauge or absolute versions, the sensor offers a very high resistance to overpressure, has reverse polarity and short circuit protection. Complies with the EMC directive 89/336/EEC.

  86. Hygenic pressure sensor

    Hygenic pressure sensor

    Model: ATM/F
    • 0-100mbar to 0-25 bar gauge or abs
    • -25° to 100°C range
    • Voltage or analogue output
    • Accuracy 0.25%
    • Stainless steel

    Hygenic pressure sensor

    The ATM/F is stainless steel bodied sensor specifically for hygenic application requirements such as food, beverage, milk or other flush mount requirements. Measuring ranges from as little as 0-100 mbar up to 0-25 bar gauge or absolute and temperatures to 85 Deg C. Reverse polarity and short circuit protection and 3 times full scale overpressure are included. The ATM/F has all the relevant options such 1", 1.5" or 2" Triclover fittings, Milk Clamp type DIN 11851, or DN25 / DN50. For hazardous area needs, please see ATM/F/Ex
     

  87. ATEX 4-20mA

    ATEX 4-20mA

    Model: ATM/F/Ex
    • 0-100mbar to 0-25 bar g or a
    • -25° to 85°C range
    • Analogue output
    • Accuracy 0.1%
    • Stainless steel

    ATEX 4-20mA

    The ATM/F/Ex is stainless steel bodied sensor specifically for hygenic application requirements such as food, beverage, milk or other flush mount requirements. Measuring ranges from as little as 0-100 mbar up to 0-25 bar gauge or absolute and temperatures to 85 Deg C. Reverse polarity and short circuit protection and 3 times full scale overpressure are included. The ATM/F/Ex has all the relevant options such 1", 1.5" or 2" Triclover fittings, Milk Clamp type DIN 11851, or DN25 / DN50. Additional certification options include oil fills for oxygen service, mining approval to M1 Ex ia, GL Marine approval.

     

  88. Compact OEM

    Compact OEM

    Model: ATM.1ST
    • 0-100mbar to 0-1000bar a or g
    • -40° to 125°C range
    • Voltage or analogue output
    • Accuracy 0.1% to 0.25%
    • Stainless steel or titanium

    Compact OEM

    The ATM 1st is available with compact housings in stainless steel or titanium, measuring ranges from as little as 0-50 mbar up to 0-1000 bar gauge or absolute, temperatures to 125 Deg C and outpur 4-20mA, 0-5 or 0-10 volts. Reverse polarity and short circuit protection and 3 times full scale overpressure is included, the ATM 1st pressure sensor provides the ideal solution for industries where reliable and accurate pressure sensing is required. Several options available including flush diaphragm for high viscosity media, titanium construction, o'ring seal materials, threads and electrical connections. Custom / OEM models are available on request.

  89. Compact size

    Compact size

    Model: ATM.1ST/EX
    • 0-50 mbar to 0-1000 bar g or a
    • -40° to 150°C 
    • 4-20 mA Analogue output
    • Accuracy 0.25%
    • Stainless steel or titanium

    Compact size

    The ATM 1st/Ex is available with compact housings in stainless steel or titanium, measuring ranges from as little as 0-50 mbar up to 0-1000 bar and temperatures to 125 Deg C. Reverse polarity and short circuit protection and 3 times full scale overpressure is included, the ATM 1st/Ex pressure sensor provides the ideal solution for industries where reliable and accurate pressure sensing is required within hazardous for gas and dust areas such as food and beverage, oxygen service, marine, mining and general OEM hazardous area applications.

    Marine approvals include GL, Mining I M1 EX ia I certification for mining Gas Group 1. Atex for both gas and dust.

     

  90. Low pressure 100mBar+

    Low pressure 100mBar+

    Model: ATM.ECO
    • 0-100mbar to 0-1000bar g or a
    • -40° to 125°C range
    • Votage or analogue output
    • Accuracy 0.25%
    • Stainless steel or titanium

    Low pressure 100mBar+

    The ATM ECO is the entry level general industrial/OEM sensor where quality and long term use is essential. Made from 316L grade stainless steel or titanium as an option, the sensor is designed 0.25% accuracy and suitable to 125 deg C. Measuring ranges go as low as 0-100mbar to 0-1000bar in either gauge or absolute pressure reference.The sensor incorporates a piezoresistive measuring element. Reverse polarity and short circuit protected with high EMV stability. Special designs available on request.

  91. General purpose Atex pressure sensor

    General purpose Atex pressure sensor

    Model: ATM.ECO/Ex
    • 0-50mbar to 0-1000 bar gauge or abs
    • -40° to 125°C range
    • Analogue output
    • Accuracy 0.25%
    • Stainless steel or titanium

    General purpose Atex pressure sensor

    The ATM Eco-ex is available with compact housings in stainless steel or titanium, measuring ranges from as little as 0-50 mbar up to 0-1000 bar and temperatures to 125 Deg C. Reverse polarity and short circuit protection and 3 times full scale overpressure is included, the ATM.ECO/Ex  pressure sensor provides the ideal solution for industries where reliable and accurate pressure sensing is required within hazardous for gas and dust areas such as food and beverage, oxygen service, marine, mining and general OEM applications.

    Marine approvals include GL, I M1 EX ia I certification for mining Gas Group 1.

  92. Atex 4-20mA

    Atex 4-20mA

    Model: ATM/Ex
    • 0-100 mbar to 0-1000 bar
    • -40° to 150°C range
    • 4-20mA Analogue output
    • Accuracy to 0.1%
    • Stainless steel or titanium

    Atex 4-20mA

    The ATM Ex is available with housings in stainless steel or titanium, measuring ranges from as little as 0-50 mbar up to 0-1000 bar and operating temperatures to 85 Deg C. Reverse polarity and short circuit protection and 3 times full scale overpressure is included, the ATM Ex  pressure sensor provides the ideal solution for industries where reliable and accurate pressure sensing is required within hazardous for gas and dust areas such as food and beverage, oxygen service, marine, mining and general applications.

    Marine approvals include GL, Mining gas group 1, I M1 EX ia I certification, CSA / FM approvals.

  93. Pressure and 2xSPDT

    Pressure and 2xSPDT

    Model: ATM/GR
    • 0-100mbar to 0-1000bar g or a
    • -40° to 150°C range
    • Analogue output
    • Accuracy up to 0.1%
    • Feature: 2 x SPDT switches

    Pressure and 2xSPDT

    The ATM/GR  is a precision pressure transmitter with 4-20mA (or 0-20mA) but also incorporating two independent SPDT switch outputs adjustable over the full range of the transmitter range. This transmitter with its excellent long term stability is capable of providing safety features in a wide range of industrial or process applications where pressure or level limits are critical or could be used to control pressure levels or even water levels in tanks using the switches to turn on and off a pump for example. The switches can be set high or lower than the pressure, are adjusted via on-board potentiometers. Options include high media temperatures to 150 degrees C, Titanium body, 0.1% accuracy, flush diaphragm, special oil fills for oxygen or food/beverage use. Customer designs available upon request. 

  94. Industrial combined P&T

    Industrial combined P&T

    Model: ATM/T
    • 0-100mbar to 0-1000 bar G or A
    • -40° to 150°C range
    • Voltage or analogue output
    • Accuracy 0.25%
    • PT100 temperature sensor

    Industrial combined P&T

    The ATMT is a precision pressure transmitter incorporating a PT100 measuring element to provide a dual output of either 4-20 mA or 0-5/10 VDC designed for use to 150 deg C. Due to the modular contruction, there are a wide range of pressure threads including flush mount and electrical connections available to IP67. Options include Titanium construction, Accuracy 0.5%, 0.25% or 0.1% and special oil fills for ASEOL food or oxygen service.

  95. High temp 150 Deg C

    High temp 150 Deg C

    Model: ATM
    • 0-100mbar to 0-1000bar gauge or abs
    • -40° to 150°C process temp range
    • V or mA  output
    • Accuracy 0.25%
    • Stainless steel or titanium

    High temp 150 Deg C

    The ATM is available with housings in stainless steel or titanium, measuring ranges from as little as 0-50 mbar up to 0-1000 bar and operating where the media is150 Deg C by ue of a cooling fin. Reverse polarity and short circuit protection and 3 times full scale overpressure is included. the ATM pressure sensor provides the ideal solution for industries where reliable and accurate pressure sensing is required within food and beverage, general applications of high temperature needs.

  96. Digital output 0.1%

    Digital output 0.1%

    Model: DTM
    • 0-100mbar to 0-1000bar
    • -40° to 150°C range
    • RS232C or RS485 interface
    • Accuracy 0.1% option
    • Stainless steel or titanium

    Digital output 0.1%

    The DTM is a digital output pressure sensor offfering either RS232 or RS485 interface. Available in 316L stainless steel as stand with a titanium option, the sensor has ranges from 0-50mbar to 0-1000 bar gauge or absolute. The sensor comprises of a piezoresistive measuring element which provides high accuracy and long term stablity and is reverse polarity and short circuit protected. Media temperatures of up to 150 deg C can be accomodated. Options include ASEOL food and oxygen use, special seal and varied process connections and electrical threads.
     

  97. Programmable HT Ex

    Programmable HT Ex

    Model: PTM/Ex
    • 0-100 mBar to 0-1000 bar g or a
    • -40° to 150°C process temperature
    • 4-20 mA output
    • Atex, marine approved
    • Stainless or titanium

    Programmable HT Ex

    The PTM/Ex is a programmable high temperature intrinsically safe pressure transmitter offering flexibility, accuracy and Atex approval for gas and dust. Incorporating a piezo resistive measuring element, the sensor is supplied with the software to allow adjustment of the zero and span, frequency response and has reverse polarity and short circuit protection. Ranges available from 0-100 mbar to 0-1000 bar and output signal 4-20 mA. Marine approvals include GL, ABS and DNV and can be used for AESOL food or oxygen service depending on options requested. Applications include marine, ships, food and beverage, general industrial and even OEM.

  98. RS485 Programmable P&T

    RS485 Programmable P&T

    Model: PTM/RS485
    • 0-100mbar to 0-1000bar g or a
    • -25° to 150°C range
    • Programmable zero / span
    • Accuracy 0.1%
    • RS485 (digital) & dual 4-20mA

    RS485 Programmable P&T

    The PTM/RS485 is a fully digital programmable pressure transmitter providing the option of a 4-20mA analog output in addition to the standard RS485 MODBUS protocol. The transmitter offers the total accuracy of ≤± 0.15% FS including linearity, hysteresis, repeatability and thermal effects. The PTM also provides a precision temperature output thus offering a very high performance pressure/temperature sensor at a very affordable price. Options include higher accuracy, flush mount, surge protection and special oil fills for food and oxygen service.

  99. Programmable food grade

    Programmable food grade

    Model: PTM
    • 0-100mbar to 0-1000bar
    • -40° to 85°C range
    • Analogue output
    • Accuracy 0.1%
    • Stainless steel or titanium

    Programmable food grade

    The PTM is a programmable pressure transmitter offering flexibility, accuracy, incorporating a piezo resistive measuring element, the sensor is supplied with the software to allow adjustment of the zero and span, frequency response and has reverse polarity and short circuit protection. Ranges available from 0-100mbar to 0-1000bar and output signal 4-20 mA. Process and electrical connections are configurable from the data sheet. AESOL food or oxygen service depending on options requested. Applications include food and beverage, general industrial.
     

  100. Atex mV output

    Atex mV output

    Model: TM/Ex
    • 0-100mbar to 0-1000bar g or a
    • -25° to 125°C range
    • mV output
    • Accuracy 0.25%
    • Stainless steel or titanium

    Atex mV output

    The TM/Ex pressure sensor has ranges from 0-50 mbar to 0-1000 bar available, 316L stainless steel construction as standard with titanium option. Designed mainly for test and measurement application or elavated temperature needs. Intrinsic safety approval for either gas or dust to II 1G EEx ia IIC T3…T6 and II 1D T90°C IP 6X. ASEOL food grade oil fill option available.