OEM

These physical properties, when combined together in a single analysis, can be used by an ECU to dynamically modify the parameters to optimize engine performance, minimize emissions and avoid engine failures due to off-spec bio fuels.

  1. FPS2810 Fluid Properties Sensor

    FPS2810 Fluid Properties Sensor

    • Fully integrated
    • Stand-alone module
    • Oil quality monitoring
    • NIST calibration
    • CAN J1939 output

    FPS2810 Fluid Properties Sensor

    The FPS2810B12C4 is a novel Oil Quality sensor that directly and simultaneously monitors the quality of fluids such as engine oil, transmission and brake fluid, hydraulic and gear oils. Relying on patented tuning fork technology, the sensor measures the direct and dynamic relationship between multiple physical properties such as temperature, density, dynamic viscosity and dielectric constant to determine the quality, condition and contaminant loading of fluids such as engine oil, transmission and brake fluid, hydraulic and gear oils.

  2. FPS2851 Fluid Properties Sensor

    FPS2851 Fluid Properties Sensor

    • Fully integrated
    • Real time urea quality sensor
    • Urea concentration
    • Urea temperature
    • Detection of unauthorized fluids

    FPS2851 Fluid Properties Sensor

    The FPS2851ULC4 is a sensor that directly and simultaneously measures all the critical parameters of aqueous urea solution. Relying on patented tuning fork technology, the measurements of urea concentration, temperature enable users to determine if the quality of the employed reducing fluid will enable Selective Catalytic Reduction systems to achieve optimal performance.

  3. FPS2800 Fluid Properties Sensor

    FPS2800 Fluid Properties Sensor

    • Fully integrated
    • Stand-alone module 
    • High accuracy
    • CAN J1939 output
    • NIST calibration

    FPS2800 Fluid Properties Sensor

    The FPS2800B12C4 is a novel fluid property sensor that will directly and simultaneously measure the viscosity, density, dielectric constant and temperature of fluids.

  4. Water Content in Oil + Temp

    Water Content in Oil + Temp

    • Water Content in Oil
    • Typical 0 to 1000ppm
    • V Output 
    • NTC Resistance Output
    • 25°C 10k  Accuracy +/- 1°C

    Water Content in Oil + Temp

    Based on the combined miniature humidity / temperature sensor, HTM2500B3C4OIL is a very cost effective dedicated water content in oil and temperature transducer designed for industrial, transformers, trunk and automotive applications where a reliable and accurate measurement of water in oil content is needed. Direct interface with a micro-controller is made possiable with the module's water content voltage output. Customized versions are available upon request.