Miniature Accelerometer
DC and AC accelerometers designed for testing of lightweight components or for use in confined spaces.
-
52M30
- 0-2000g range
- -40 to 90°C range
- mV output
- Up to 7000Hz
- NIST calibration
52M30
The Model 52M30 accelerometer has an advanced piezoresistive MEMS sensing element which offers excellent dynamic range and stability. This unit features a full bridge output.
-
64C
- 0-6000g range
- 0 to 50°C range
- mV output
- Up to 7000Hz
- Auto safety accelerometer
64C
The Model 64C accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit is ideal for impact crash testing.
-
53/53A
- 0-2000g range
- -20 to 85°C range
- mV output
- Up to 4500Hz
- Crash testing
53/53A
The Model 53 accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. This sensor is easily mounted in hard to reach places on vehicles under test.
-
7100A
- 0-500g range
- -55 to 150°C range
- V output
- Up to 15KHz
- TEDS compliance
7100A
The Model 7100A is a high performance IEPE accelerometer and is hermetically sealed and features the popular through hole mount installation for use with standard mounting screws.
-
7101A
- 0-100g range
- -55 to 125°C range
- V output
- Up to 10KHz
- Miniature
7101A
The accelerometer is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >10kHz utilizing stable piezo-ceramic crystals in annular shear mode. The model 7101A features a hermetically sealed titanium housing and the popular through hole mount configuration.
-
7132A
- 0-2000g range
- -55 to 125°C range
- V output
- Up to 12000Hz
- Miniature triaxial
7132A
The Model 7132A features a hermetically sealed titanium construction with a 4-pin Microtech connector interface. The model 7132A incorporates stable piezo-ceramic crystals in annular shear mode which provide a flat frequency response up to >12kHz.
-
7120A
- 0-500g range
- -55 to 100°C range
- V output
- Up to 7000Hz
- Miniature IEPE
7120A
The Model 7120A is a high performance IEPE accelerometer designed for modal applications.
-
7501A
- 0-4000g range
- -73°C to 260°C range
- 5.6pC/g output
- Up to 10kHz
- Charge output accelerometer
7501A
The Model 7501A is a miniature piezoelectric charge mode accelerometer with a very high temperature range.
-
7502A
- 0-5000g range
- -73 to 260°C range
- IEPE
- Up to 14000Hz
- Titanium housing
7502A
The Model 7502A is a miniature piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. The accelerometer incorporates an annular shear mode crystal that provides stable thermal response.
-
7202A
- 0-500g range
- -55 to 130°C range
- V output
- Up to 15KHz
- Ideal for HUMS
7202A
The Model 7202A is a case isolated high temperature IEPE accelerometer with internal shielding. The accelerometer has a flat bandwidth up to 15kHz with a resonant frequency greater than 40kHz.
-
805
- 0-500g range
- -54 to 100°C range
- IEPE
- Up to 15kHz
- Board mount IEPE
805
The Model 805 is a miniature adhesive mount IEPE accelerometer built on a 3-pin TO-5 header. The accelerometer features a hermetic construction in a TO-5 header configuration. The model 805 incorporates a stable piezo-ceramic crystal and an integrated charge converter amplifier in a 100% shielded housing suitable for many embedded OEM applications.
-
64
- 0-6000g range
- -40 to 121°C range
- mV output
- Up to 7000Hz
- J211 triaxial accelerometer
64
The Model 64 accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit features a full bridge output configuration with temperature compensation.
-
1201
- 0-1000g range
- -0 to 50°C range
- mV output
- Up to 3000Hz
- Adhesive mount
1201
The Model 1201 accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. This sensor is easily mounted in hard to get places on vehicles under test.
-
63
- 0-2000g range
- -20 to 85°C range
- mV output
- Up to 3000Hz
- Miniature
63
The Model 63 accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications.
-
1210F
- 200g range
- -40 to 100°C range
- mV output
- Up to 1800Hz
- Ratiometric output
1210F
The Model 1210F accelerometer is a small, compact uniaxial MEMS accelerometer designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 2g to 200g and frequency response to 2000 Hz, this sensor is easily mounted in hard to get places on vehicles under test.
-
68C
- 0-2000g range
- -20 to 85°C range
- mV output
- Up to 3000Hz
- J211 triaxial accelerometer
68C
The Model 68C accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications.This sensor is easily mounted in hard to reach places. This accelerometer is compliant with J211 specifications for anthropomorphic dummy applications.
-
7508A
- 0-4000g range
- -73 to 200°C range
- IEPE
- Up to 7000Hz
- Adhesive mount
7508A
The Model 7508A is a miniature piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements at temperatures up to +200°C. The accelerometer incorporates an annular shear mode crystal installed with a compression ring that eliminates the usage of epoxies that can affect long term stability at elevated temperatures.
-
64L
- 0-6000g range
- 0 to 50°C range
- mV output
- Up to 4500Hz
- Auto safety accelerometer
64L
The Model 64L accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. The Model 64L is compliant with SAE J211 standards for anthropomorphic dummy instrumentation.
-
52F
- 0-2000g range
- -40 to 90°C range
- mV output
- Up to 7000Hz
- Flange mounting
52F
The Model 52F accelerometer has an advanced piezoresistive MEMS sensing element which offers excellent dynamic range and stability. This unit features a full bridge output.
-
EGAXT3
- 0-2500g range
- -40 to 120°C range
- mV output
- Up to 3000Hz
- DC response
EGAXT3
The Model EGAXT3 miniature triaxial accelerometer combines a damping ratio of 0.7 (Nominal) with built-in over-range stops that are set to protect the unit against 10,000g shocks. This is ideal for applications which may experience rough handling or in situations where the accelerometer must survive a high initial overload in order to make a low g measurement. These units feature a Wheatsone Bridge output with compensated temperature range of 20 to 80 °C.
-
7102A
- 0-2000g range
- -55 to 125°C range
- V output
- Up to 11KHz
- Titanium body
7102A
The accelerometer features a welded hermetic titanium construction with an M3 connector. The miniature and light weight titanium package renders the accelerometer ideal for applications requiring minimal mass loading.
-
EGAS3
- 0 to 2500g range
- -40 to 120°C range
- mV output
- Up to 3500Hz
- Triaxial
EGAS3
The Model EGAS3 is a cube-shaped, triaxial accelerometer. Operating from 15 Vdc, this unit features a transverse sensitivity of 2% MAX and damping of 0.7. Over-range stops ensure survivability of the unit under extreme shock conditions while its temperature performance offers a minimal zero shift.
-
EGAS
- 0-2500g range
- -40 to 120°C range
- mV output
- Up to 3500Hz
- Damping Ratio 0.7
EGAS
The Model EGAS is a miniature, uniaxial accelerometer. The EGAS is the unit of choice for measurement professionals in the automotive, military, aerospace and transportation industries. Its combined nonlinearity and hysteresis of +/- 1% makes the EGAS well-suited for on-site testing as well as laboratory use.
-
52
- 0-2000g range
- -40 to 90°C range
- mV output
- Up to 7000Hz
- Auto safety accelerometer
52
The Model 52 accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit features a full bridge output configuration.
-
EGCS-S425
- 0-2000g range
- -20 to 80°C range
- mV output
- Up to 2000Hz
- Oil damped
EGCS-S425
The Model EGCS-S425 is a small ISO 6487 and SAE J211 compliant piezoresistive accelerometer. This unit features internal temperature compensation, anodized aluminum alloy housing and flexible cable output. This sensing element is damped with fluid to extend useful frequency range and reduce the effect of high frequencies.
-
EGCS-A2/B2
- 0-5000g range
- -40 to 120°C range
- mV or amplified output
- Up to 2400Hz
- Heavy duty
EGCS-A2/B2
The Model EGCS accelerometers combine a damping ratio of 0.7 (Nominal) with built-in over-range stops that are set to protect the unit against 10,000g shocks. This is ideal for applications which may experience rough handling or in situations where the accelerometer must survive a high initial overload in order to make a low g measurement.
-
EGCS3-D
- 0-5000g range
- -40 to 120°C range
- mV output
- Up to 4000Hz
- CE rating
EGCS3-D
The Model EGCS3-D triaxial accelerometer is available in ranges from ±5 g through ±5000 g. With over-range limit to ±10,000 g and spring strain relief, this rugged device is ideal for offshore, downhole and shock testing applications. Its small size and screw mounting ensure ease of installation, while its low power requirements and DC output facilitate integration into data acquisition and monitoring systems. The EGCS3 also features CE conformance to EN 61010-1, EN 50081-1 and EN 50082-1.
-
EGCS-D1S
- 0-5000g range
- -40 to 120°C range
- mV output
- Up to 4000Hz
- Damping ratio 0.7
EGCS-D1S
The Model EGCS accelerometer combines a damping ratio of 0.7 (Nominal) with built-in over-range stops that are set to protect the unit against 10,000g shocks. This is ideal for applications which may experience rough handling or in situations where the accelerometer must survive a high initial overload in order to make a low g measurement. These units feature a Wheatsone Bridge output with compensated temperature range.
-
EGCS-DO
- 0-5000g range
- -40 to 120°C range
- mV output
- Up to 4000Hz
- Heavy duty
EGCS-DO
The Model EGCS accelerometers combine a damping ratio of 0.7 (Nominal) with built-in over-range stops that are set to protect the unit against 10,000 g shocks. This is ideal for applications which may experience rough handling or in situations where the accelerometer must survive a high initial overload in order to make a low g measurement. These units feature a Wheatsone Bridge output with compensated temperature range.