Entran Force-Loadcell Sensors

The Entran range of end-user miniature sensor products from Measurement Specialties is now exclusively available in the UK from StrainSense Ltd.

The Entran range consists of force sensors, pressure sensors and accelerometers, all ideally suited to the exacting needs of the research and test market, with many using MEMS (Micro-Electro-Mechanical-Systems) technology.

Please see our range of Entran force sensors below. If you would like to see our full range of force sensors use the menu on the left hand side.

You can make an enquiry using our web site, or call one of our Technical Sales Engineers on +44 (0) 1908 543 038

  1. Miniature Load Cell

    Miniature Load Cell

    Model: ELHS
    • Ranges from 1kN to 50kN (200 lbf to 10,000 lbf)
    • Semi-conductor strain gauges bridge
    • Low deflection, low mass

    Miniature Load Cell

    The ELHS load cell is a compact package able to fit into many applications where others cannot. 

    The low noise Wheatstone bridge consists of piezoresistive strain gages which provide 200 mV of typical full scale output with a compact design, an extreme stiffness and superior resolution. The ELHS is provided with either SAE or metric threads for tension and compression applications.

    Care should be exercised to isolate your ELHS from off-axis loads. The ELHS is a Poisson column design providing low full scale input deflection and superior resolution. Designed specifically to provide high resolution and low deflection. 

    The ELHS can be configured with a variety of options to fine tune the instrument to your application: select from several standard compensated temperature ranges, input voltages, lead lengths or specify entirely unique combinations of these options.

    Our Technical Sales Team is available to help with the selection of our Miniatrue Load Cell and Data Acquisition Systems. Use the enquiry button, call or email.

  2. Miniature Load Cells

    Miniature Load Cells

    Model: ELHM
    • Compression or tension/compression
    • Ranges from 2.5 kN to 50 kN (500 lbf to 10 klbf)
    • Metal foil strain gauges for high stability

    Miniature Load Cells

    The ELHM load cell is a compact package able to fit into many applications where others cannot. 

    When compact design and superior stability are required, the ELHM load cell is the sensor for your application. The ELHM is provided with either SAE or metric threads for tension and compression applications. 

    Care should be exercised to isolate your ELHM from off-axis loads.  The ELHM is a Poisson column design providing low full scale input deflection and superior stability for longer term measurements. Designed specifically to provide high zero stability, the ELFM is rated for a cycle life expectancy of typically 1 x 106 0-FS cycles of zero to full rated load. 

    The ELHM can be configured with a variety of different options to fine tune the instrument to your application: select from several standard compensated temperature ranges, input voltages, lead lengths or specify entirely unique combinations of these options. 

    Our Technical Sales Team is available to help with the selection of our Miniature Load Cell and Data Acquisition Systems. Use the enquiry button, call or email.

  3. ELAF

    ELAF

    Model: ELAF
    • Button load cell
    • 10-5000 lbf range
    • Amplified or mV output
    • -40° to 120°C range
    • NIST calibration 

    ELAF

    The ELAF series of sensors, unlike most designs, are provided with a "four-bar" design where a flexible diaphragm parallels the measuring flexure. This configuration is far less susceptible to off-axis load components than single diaphragm traditional designs. Shielded, teflon insulated instrumentation cabling is provided along with spring steel strain reliefs and full NIST traceable calibration certificates. The ELAF unit is fully thermally compensated and will provide an essentially unlimited cycle life expectancy. The ELAF can be configured with a variety of options to fine tune the instrument to your application: select from several standard package geometries. Compensated temperature ranges, input voltages, lead lengths or specify entirely unique combinations of these options.