ESAM Traveller Static

ESAM TRAVELLER Static is a high-performance signal conditioner/amplifier system mainly for static and quasi-static measurements in experimental stress analysis when medium or high numbers of input channels are required. The system accepts inputs from strain gauges in all common bridge configurations, from strain gauge based transducers, from potentiometers, and from general voltage sources.  It also accepts inputs from 4-bits digital signal sources

ESAM Traveller 1

ESAM TRAVELLER 1 is a high-performance digital data acquisition system for amplifying and conditioning of analogue sensor signals. The Master Unit represents the heart of the system. In a very small cabinet it contains: The power supply, the USB-Interface with a  RAM-data buffer, the A/D-Converter as well as 8 modules of Model SGA3 strain gauge bridge amplifiers. The system can easily be extended up to a 32 channels capacity by simply adding  max. 3 Extension Units with 8 channels each of Model SGA3 strain gauge bridge amplifiers.
 

DL/N/Ex

Feature: Battery operation, Measurement interval 2s…24h, 130'000 Measurement values

DL/N 70

Stainless steel

Feature: Battery operation, Measurement interval 0.5s…24h, 500'000 Measurement values

GSM

PAK-II

PAK Mobil MK II is our compact mobile multi-channel measuring system for vibration-technological and acoustic analysis - a measuring front end for the most exacting user. It can be universally configured for any common measurement pickups and is easy to adapt to the task at hand. This reduces the effort required, speeds up your project, and minimizes your cost.

A laptop communicates with the measuring front end via a standard ethernet (10 or 100 Mbit/s and even 1 GBit/s) - wireless LAN is also an option. The computer is used to clearly display measured data online in real time, set channels and visualize recording level, synchronize measurements with rpm, and to analyze and interpret measured data.

Rebel XT

The Rebel XT can acquire vehicle data remotely and without user interaction, from serveral data sources reliably for long periods of time. Excellent data logger for collecting data from vehicles remotely. CAN Logging System

DiaLog

• Construct complex data logging configurations using an intuitive graphical interface. 
• Collect data using ISO 14229 and 15765 Diagnostic Protocols, CCP/xCP and directly from a CAN bus.
• Efficient database system allows simple administration of configurations and data.
• USB, GPRS and Bluetooth connectivity to Rebel data logger.
• Reconfigure and retrieve data by direct and remote connections.
• Live connection allows real time review of data while recording.

H box

The H Box is an extension to the Rebel TX data logger (CAN Logging System) allowing a variety of sensor inputs to be converted into the CAN format.  

SureFleet

The SureFleet gives access to data collected from vehicles by an onboard Rebel xt logger (CAN Logging System) from anywhere in the world in real time.  The data is streamed via GPRS to a dedicated server from where the data can be processed.

DL/Ex

Battery operation, Measurement interval 2s…24h, 130'000 Measurement values. ATEX approved for use in hazardous areas, eg landfill, fuel tanks.

28000

The Precision 28000 makes it easy to manage a test with hundreds of channels and a mix of programmable transducers.  Choose bridge, charge, IEPE w/TEDS, voltage (filter amplifier), strain, thermocouple, RTD/potentiometer, frequency, or other transducers. Customize the 28000 for high-speed transient applications, static applications, or a combination of both.

4164

The Precision 4164 Switch Matrix System is a reliable solid-state switch matrix system in a compact rack mountable or bench top package providing computercontrolled connections between any input and any output. Connect between 64 input and 64 output channels with 4,096 cross points. Save time and reduce errors on your switch system setups. Program your switch configurations on a host computer, download them to your switch system over the network and your tests are ready to go. With system health monitoring, fault diagnostics and exhaustive self-tests, you can be confident of the integrity of your switch system

464kB

The 464kB is a 3-stage non-blocking solid state switching system which can provide the equivalent of a 256 x 256 rectangular coordinate switch with 65,536 cross points while using only 24,064 cross points. It uses 63% less cross points than a 256 x 256 rectangular coordinate switch, providing significant economy for large switching systems. This economy, as well as one-third the capacitive loading, is the main advantage of 3-stage switching systems.

The 464kB uses its test subsystem to verify the system integrity. A Go/No-Go test checks the integrity of the current setup. Running the FAT (Factory Acceptance Test) exhaustively tests all possible switch settings and reports which plug-in modules are defective.

PF-1U-FA

The PF-1U-FA series is a multi-channel programmable filter/amplifier system in a compact rack mountable or bench top package. Fully programmable 8-channel and 16-channel configurations are available in high performance or standard configurations.  The standard PF-1U-FA configuration offers 4-pole low-pass filters with five programmable cutoffs and gain programmable to x 1,024.

The high performance PF-1U-FA offers a choice of 4 or 8-pole low-pass and band-pass filters with cutoffs programmable from 1 Hz to 204.6 kHz. The high performance PF-1U-FA has an upgraded wideband (500 kHz) low-noise amplifier with transducer DC
suppress capability. Gain is programmable to x 8,192.

ESAM Traveller CF

Traveller CF is a Signal Conditioner Amplifier System with CF-Card data Storage. Flexible channel numbers and simple, straight forward operation procedures make the system meet the latest requirements of digital measurement technology and data processing. A built-in PCM-encoder enables telemetric operation with fast data transfer rates and high data security. System Traveller CF excellently satisfies all the sophisticated demands of stationary and mobile measurements of mechanical and electrical quantities.
 

Model SGA-0B Signal conditioner/Amplifer

• Analog signal conditioner/amplifier system with very high signal bandwidth and gain
• Analog signal bandwidth up to 120 kHz
• Gain up to 10 000 X
• Excitation voltage for all sensors up to 10 V
• Constant current excitation optional
• Operation via Software and USB-Interface
• Analog output ±10 V
• Inputs for strain gauges, strain gauge based transducers, and piezo-resistive sensors
• Stand-alone 1 channel, or multi-channel configuration

DL

Feature: Battery operation, Measurement interval 2s…24h, 130'000 Measurement values

DL/N

Feature: Battery operation, Measurement interval 2s…24h, 130'000 Measurement values