Crash Test

Specialised accelerometers to suit the crash test industry with rugged cable strain reliefs, robust housings and lightweight designs. Many units are suitable for adhesive mounting and re-use. Different damping coefficients and g ranges are available. Gyros (angular rate sensors) are also available to measure roll and rotation.

  1. Model 64L Accelerometer

    Model 64L Accelerometer

    Model: 64L
    • DC Response Accelerometer
    • Durable Cable, Small Package
    • Transverse Sensitive Axis
    • SAE J2570 Compliant

    Model 64L Accelerometer

    The Model 64L Accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit features a full bridge output configuration with a temperature range from 0 to +50º C. A slight amount of internal gas damping provides outstanding shock survivability and a flat amplitude/phase response up to >4kHz. The Model 64L is compliant with SAE J211 standards for anthropomorphic dummy instrumentation.

    Our Technical Sales Team is available to help with the selection of our Model 64L Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  2. Model 1201F Accelerometer

    Model 1201F Accelerometer

    Model: 1201F
    • DC Response Accelerometer
    • Durable, Low Noise Cable
    • Vehicle Crush Zone Testing
    • Low Cost, High Performance

    Model 1201F Accelerometer

    The Model 1201F Accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from ±50 g to ±1000g and frequency response to 3000 Hz, this sensor is easily mounted in hard to get places on vehicles under test.

    For a similar accelerometer designed for adhesive mounting, see the model 1201.

    Our Technical Sales Team is available to help with the selection of our Model 1201F Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  3. Model EGCS-S425 Accelerometer

    Model EGCS-S425 Accelerometer

    Model: EGCS-S425
    • Range ±50 to ±2000g
    • Critically Damped
    • Internally Compensated
    • ISO 6487 Compliant

    Model EGCS-S425 Accelerometer

    The Model EGCS-S425 is a small, ISO 6487 and SAE J211 compliant piezoresistive accelerometer. This unit features internal temperature compensation, anodized aluminum alloy housing and flexible cable output. This sensing element is damped with fluid to extend useful frequency range and reduce the effect of high frequencies.

    Our Technical Sales Team is available to help with the selection of our Model EGCS-S425 Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  4. Model 64C Accelerometer

    Model 64C Accelerometer

    Model: 64C
    • DC Response Accelerometer
    • Durable Low Noise Cable
    • Small Package
    • SAE J2570 Compliant

    Model 64C Accelerometer

    The Model 64C Accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit features a full bridge output configuration with a compensated temperature range from 0 to +50º C. A slight amount of internal gas damping provides outstanding shock survivability and a flat amplitude and phase response up to 7kHz.The Model 64C is compliant with SAE J211 standards for anthropomorphic dummy instrumentation.

    Our Technical Sales Team is available to help with the selection of our Model 64C Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

     

  5. High Accuracy Accelerometer

    High Accuracy Accelerometer

    Model: 58
    • 0-2000g range
    • 0 to 85°C range
    • mV output
    • Up to 4000Hz
    • Auto safety accelerometer

    High Accuracy Accelerometer

    The 58 Accelerometer is a MEMS DC response accelerometer designed for auto safety crash testing. The accelerometer is packaged in a rugged housing with a shielded low-noise cable specifically designed for crush zone testing. The 58 accelerometer features a full bridge output configuration with a temperature range from -20 to +85ºC. A slight amount of internal gas damping provides outstanding shock survivability and a flat amplitude and phase response up to 4000Hz.  Applications include crash testing, crush zone testing, impact testing, off-road and transportation testing.

  6. 40A Accelerometer

    40A Accelerometer

    Model: 40A
    • ±25g to ±2000g Dynamic Range
    • Fluid Damped, DC Response
    • Compliant to SAE J2570
    • Temperature Compensated

    40A Accelerometer

    The Model 40A Accelerometer is a small piezoresistive accelerometer designed to be compliant with the latest SAE J211/J2570 (AUG2009) specifications. This unit features built-in mechanical stops, anodized aluminum alloy housing and flexible cable output. The sensing element is fluid damped to extend useful frequency range and reduce the adverse effect of high frequencies ringing caused by sensor resonance.

    Our Technical Sales Team is available to help with the selection of our 40A Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  7. Miniature Triaxial Accelerometer

    Miniature Triaxial Accelerometer

    Model: 53
    • 0-2000g range
    • -20 to 85°C range
    • mV output
    • Up to 4500Hz
    • Crash testing

    Miniature Triaxial Accelerometer

    The Model 53 accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. This sensor is easily mounted in hard to reach places on vehicles under test using adhesive mounting.

  8. 63 Accelerometer

    63 Accelerometer

    Model: 63
    • 0-2000g range
    • -20 to 85°C range
    • mV output
    • Up to 3000Hz
    • Miniature

    63 Accelerometer

    The Model 63 accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications.

  9. Model 3801A Accelerometer

    Model 3801A Accelerometer

    Model: 3801A
    • Gas Damped, DC Response
    • Hermetically Sealed
    • mV Output, Silicon MEMS
    • 10,000g Over-Range Protection

    Model 3801A Accelerometer

    The Model 3801A is a mV output piezoresistive MEMS accelerometer in a rugged welded hermetic package. The accelerometer incorporates mechanical stops for over-range protection up to greater than 10,000g. The model 3801A is offered in ranges from ±2 to ±2000g and is gas damped to provide a wide frequency response. The accelerometer is temperature compensated to provide a stable output over the operating environment.

    Our Technical Sales Team is available to help with the selection of our Model 3801A Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  10. Model 68C Accelerometer

    Model 68C Accelerometer

    Model: 68C
    • Triaxial Accel, DC Response
    • Durable Low Noise Cable
    • Reliable Performance
    • SAE J2570 Compliant

    Model 68C Accelerometer

    The Model 68C Accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. The unit incorporates three replaceable sensing modules with mechanical overload stops that provide high shock protection in rugged applications. The model 68C accelerometer is compliant with SAE-J211 specifications for anthropomorphic dummy instrumentation. The model 68CM1 has a cover installed for additional protection.

    Our Technical Sales Team is available to help with the selection of our Model 68C Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  11. Model 1201 Accelerometer

    Model 1201 Accelerometer

    Model: 1201
    • DC Response Accelerometer
    • Durable, Low Noise Cable
    • Vehicle Crush Zone Testing
    • Low Cost, High Performance

    Model 1201 Accelerometer

    The Model 1201 Accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from ±50 g to ±1000g and frequency response to 3000 Hz, this sensor is easily mounted in hard to get places on vehicles under test.

    For a similar accelerometer designed for bolt mounting, see the model 1201F.

    Our Technical Sales Team is available to help with the selection of our Model 1201 Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  12. 64 Accelerometer

    64 Accelerometer

    Model: 64
    • 0-6000g range
    • -40 to 121°C range
    • mV output
    • Up to 7000Hz
    • J211 triaxial accelerometer

    64 Accelerometer

    The Model 64 accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit features a full bridge output configuration with temperature compensation.

  13. Model 52M30 Accelerometer

    Model 52M30 Accelerometer

    Model: 52M30
    • Small Size, Light Weight
    • Jacketed & Shielded Cable
    • Silicon MEMS Technology
    • ±50g to ±6000g Ranges

    Model 52M30 Accelerometer

    The Model 52M30 accelerometer has an advanced piezoresistive MEMS sensing element which offers excellent dynamic range and stability.  This unit features a full bridge output with an operating temperature range from -40 to +90°C and measurement ranges of ±50g to ±6,000g. A slight amount of gas damping provides outstanding shock survivability and a flat amplitude response to 7kHz.

    Our Technical Sales Team is available to help with the selection of our Model 52M30 Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  14. Model 64B Accelerometer

    Model 64B Accelerometer

    Model: 64B
    • DC Response Accelerometer
    • Durable Low Noise Cable
    • Environmentally Sealed
    • SAE J2570 Compliant

    Model 64B Accelerometer

    The Model 64B Accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit features a full bridge output configuration with a temperature range from 0 to +50º C. A slight amount of internal gas damping provides outstanding shock survivability and a flat amplitude and phase response up to 7kHz. 

    The Model 64B is compliant with SAE J211 standards for anthropomorphic dummy instrumentation.

    Our Technical Sales Team is available to help with the selection of our Model 64B Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  15. Model 1203 Accelerometer

    Model 1203 Accelerometer

    Model: 1203
    • DC Response Triaxial Accelerometer
    • Durable, Low Noise Cable
    • Reliable Performance
    • Low Cost, Rugged

    Model 1203 Accelerometer

    The Model 1203 Accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from ±50g to ±1000 g and frequency response to 3000 Hz, this sensor is easily mounted in hard to reach places on vehicles under test.

    Our Technical Sales Team is available to help with the selection of our Model 1203 Accelerometer and Data Acquisition Systems. Use the enquiry button, call or email.

  16. Angular Rate Sensor

    Angular Rate Sensor

    Model: 620 and 620M1
    • ±500 to ±50,000˚/sec ranges
    • 7-16Vdc Excitation (5Vdc option)
    • -40 to +105C 
    • Shock Resistant
    • Low cross-axis sensitivity

    Angular Rate Sensor

    The Model 620 Angular Rate Sensor is a small analog gyroscope designed specifically for automotive safety testing and other system designs requiring accurate measurement of angular velocity. The Model 620 series gyro utilizes silicon MEMS sensing elements with custom electronics and packaging to produce an angular rate sensor that is highly reliable even under excessive shock and vibration environments.  The Dynamic range of this model is as follows: +/- 500, 1500, 6000, 12K, 18K, 24K or 50K deg/sec.

    Opitional accessories: Triaxial Mounting Block and 3-channel precision low noise DC amplifier.

  17. 633 6DOF Sensor

    633 6DOF Sensor

    Model: 633

     

    • Silicon MEMS 6DOF Sensor
    • ±50 to ±6000g Acceleration Range
    • ±500 to ±24,000°/sec Rate Range
    • Miniature Compact Package
    • Rugged Shock Resistant Housing

    633 6DOF Sensor

    The Model 633 6-DOF Sensor is an analog sensor that includes outputs of three gyroscope/rate sensors and three DC accelerometers in one small package.  The rate sensors and accelerometers are aligned orthogonally to each other which allow the user to measure motions in all 6 degrees of freedom (6 DOF). Designed specifically for product research and development in harsh environments, the Model 633 can maintain its precision under high shock condition.