Board Mount / OEM
Wide range of pressure sensor capsules for manufacturers to build into their own equipment and transducers. Packages include surface mount, TO, dual-in-line, etc
-
MS1471
- 0-500 psi
- -40° to 125°C range
- 0-60mV output
- 0.25% accuracy
- Board mountable
MS1471
The MS1471 is a piezoresistive silicon pressure sensor packaged in a surface mount configuration. It is intended for high volume applications where small size, light weight, low cost, and compatibility with automated assembly equipment are required. Offset and span are calibrated at room temperature for OEMs requiring higher accuracies.
-
MS5701
- 0-50 in mbar
- 20 to 85°C range
- 24bit output
- Accuracy 0.5%
- Low power, 1 μA (standby < 0.15μA)
MS5701
The MS5701 is a new generation of high resolution differential pressure sensors with SPI and I2C bus interface. It is optimized for water level measurement until ~50 cm. The sensor module includes a high linear pressure sensor and a ultra low power 24 bit ΔΣ ADC with internal factory calibrated coefficients.
-
MS5561C
- 1-110 kPa
- -40° to 85°C
- 3 wire interface
- Supply voltage 2.2V to 3.6V
- 16 bit ADC, sigma delta converter
MS5561C
The MS5561C is a SMD-hybrid device including a precision piezo-resistive pressure sensor and an ADC-Interface IC. It uses a three-wire serial interface for communication. The module dimensions of 4.75 mm x 4.25 mm and a height of only 1.6 mm allows for up-to-date SMD design. It provides a 16 bit data word from a pressure and temperature dependent voltage. The MS5561 is a low power, low voltage device with automatic power down (ON/OFF) switching. A 3-wire interface is used for all communications with a micro-controller.
-
DP86 Series
- 0-500 psi
- -40° to 125°C range
- mV output
- Accuracy 0.1%
- Stainless steel
- Differential
DP86 Series
The DP86 Series differential pressure sensor is a double-sided, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The series can be configured for o-ring mounting or threaded process fittings.
-
85 Flush Mount
- 0-500 psi
- -20° to 125°C range
- mV output
- Accuracy 0.5%
- Stainless steel
85 Flush Mount
The 85 Flush Mount is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 85 Flush Mount is designed for o-ring mounting where the diaphragm must not be shrouded by weld ring or fitting. The sensing package utilizes silicon oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. A ceramic substrate is attached to the package that contains laser-trimmed resistors for temperature compensation and offset correction. An additional laser trimmed resistor is included which can be used to adjust an external differential amplifier and provide span interchangeability to within ±1%.
-
MSP100
- 0-500 psi
- -0° to 55°C range
- mV output
- Accuracy 0.2%
- Stainless steel
MSP100
The MSP100 series pressure transducers provide stainless steel media compatibility for the price of competing plastic sensors. This sensor has no silicone gel or polymeric media isolation methods to fail in contact with water or other harsh chemicals. The all metal diaphragm design is immune to pressure fluctuations and subsequent damage. The all-metal pressure enclosure has a small round plastic housing and is available with a cable and connector. Pressure connections are provided via an O-ring seal. Both compensated/calibrated and uncompensated versions are available. High volume port options are customer specific. The small size vs. performance and media compatibility are provided through solid-state Microfused™ technology
-
MSP300
- 0-10K psi
- -40° to 120°C range
- mV, voltage or analogue output
- Accuracy 1.0%
- Stainless steel
MSP300
The MSP300 pressure transducer sets a new price performance standard for low cost, high volume, commercial and industrial applications. This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids.
-
MSP340
- 0-10K psi
- -40° to 120°C range
- mV or voltage output
- Accuracy 1.0%
- Stainless steel
MSP340
The MSP 340 series of pressure transducers is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids. The transducer pressure cavity is machined from a solid piece of 174 PH stainless steel. The standard version includes a 1/4 NPT pipe thread allowing a leakproof, all metal sealed system. There are no Orings, welds or organics exposed to the pressure media. The durability is excellent.
-
50
- 0-500 psi
- -40° to 125°C range
- mV output
- Accuracy 0.25%
- T-05 construction
50
The 50 is a piezoresistive silicon pressure sensor packaged in a TO-5 configuration. Absolute pressure ranges from 0-15 to 0-500 psi are available. It is intended for high volume applications where small size, light weight and low cost are required. This design is intended for non-corrosive gases and is not recommended for liquids. A gel filling can be applied to provide mild protection against humidity and dust.
-
MS1451
- 0-500 psi
- -40° to 125°C range
- 0-60mV output
- 0.25% accuracy
- Board mountable
MS1451
Piezoresistive silicon die technology, temperature compensated, and they are suitable for use with non-corrosive gases.
-
13 43
- 1 psi
- -40° to 125°C range
- 0-100mV
- 0.3% non linearity
- T0-8 package
13 43
The 13 and 43 are temperature compensated, piezoresistive silicon pressure sensors packaged in a TO-8 configuration. It provides excellent performance and long-term stability. Integral temperature compensation is provided over a range of 0-50°C using laser-trimmed resistors.
-
13 43 Std
- 0-250 psi
- -40° to 125°C range
- 0-100mV output
- 0.1% accuracy
- Current excitation
13 43 Std
The 13 and 43 are temperature compensated, piezoresistive silicon pressure sensors packaged in a TO-8 configuration. It provides excellent performance and long-term stability. Gauge and absolute pressure ranges from 0-2 to 0-250 psi are available. Integral temperature compensation is provided over a range of 0-50°C using laser-trimmed resistors. An additional laser-trimmed resistor is included to normalize pressure sensitivity variations by programming the gain of an external differential amplifier. This provides sensitivity interchangeability of ±1%.
-
27-37
- 0-250 psi
- -40° to 125°C range
- 0-100mV output
- 0.1% accuracy
- T0-8
27-37
The 27 and 37 UltraStable™ are high performance, temperature compensated, piezoresistive silicon pressure sensors packaged in a TO-8 configurations. It uses Measurement Specialties’ proprietary UltraStable™ die to provide excellent performance and long-term stability over wide temperatures. Gage and differential pressure ranges from 0-15 to 0-250 psi are available. Integral temperature compensation is provided over a range of -20ºC to +85ºC using laser-trimmed resistors.
-
23-33 Psi
- 1 psi
- -40° to 125°C range
- 0-100mV output
- 0.3% non linearity
- Current excitation
23-33 Psi
The 23 and 33 are temperature compensated, piezoresistive silicon pressure sensors packaged in a TO-8 configuration. It provides excellent performance and long-term stability.
Integral temperature compensation is provided over a range of 0-50°C using laser-trimmed resistors. -
23-33 Std
- 0-250 psi
- -40° to 125°C range
- 0-100mV output
- 1% accuracy
- TO-8 package
23-33 Std
The 13 and 43 are temperature compensated, piezoresistive silicon pressure sensors packaged in a TO-8 configuration. It provides excellent performance and long-term stability. Gage and absolute pressure ranges from 0-2 to 0-250 psi are available. Integral temperature compensation is provided over a range of 0-50°C using laser-trimmed resistors.
-
89 Series
- 0-10K psi
- -40° to 125°C range
- mV output
- Accuracy 0.25%
- Stainless steel
89 Series
The 89 series is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing featuring 5/16-32 UNEF threads and can be welded in place. The 89 is designed for high pressure OEM applications where compatibility with corrosive media is required. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element.
-
87N Series
- 0-5K psi
- -40° to 125°C range
- mV output
- Accuracy 0.25%
- Stainless steel
87N Series
The 87N series is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 87N is designed for high pressure OEM applications where compatibility with corrosive media is required
-
85 Series
- 0-500 psi
- -40° to 125°C range
- mV output
- Accuracy 0.1%
- Stainless steel
85 Series
The 85 series is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The Model 85 is offered in a weldable package or with a variety of threaded fittings such as 1/4 and 1/8NPT, 1/4BSP as well as custom process fittings. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element.
-
86 Series
- 0-500 psi
- -40° to 125°C
- mV output
- Accuracy 0.5%
- Stainless steel
86 Series
The 86 series is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 86 is designed for o-ring mounting and OEM applications where compatibility with corrosive media is required. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element.
-
86A Amplified
- 0-150 psi
- -20° to 85°C range
- Voltage output
- Accuracy 1.0%
- Stainless steel
86A Amplified
The 86A is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 86A is designed for o-ring mounting. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. The 86A is designed for high performance, low pressure applications. A custom ASIC is used for temperature compensation, offset correction and provides an amplified output of 0.5 to 4.5V.
-
154N Series
- 0-500 psi
- -40° to 125°C
- mV output
- Accuracy 0.1%
- Stainless steel
154N Series
The 154N series is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 154N is designed for o-ring mounting and OEM applications where compatibility with corrosive media is required. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless
steel diaphragm to the sensing element. -
82C
- 0-500 psi
- -40° to 125°C range
- mV output
- Accuracy 0.2%
- Stainless steel
82C
The 82 series is a 19mm small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. They are designed for o-ring mounting and OEM applications where compatibility with corrosive media is required
-
82U
- 0-500 psi
- -40° to 125°C range
- mV output
- Accuracy 0.2%
- Stainless steel
82U
The 82 uncompensated is a 19 mm small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 82 uncompensated is designed for o-ring mounting and OEM applications where compatibility with corrosive media is required. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element.
-
82 Series
- 0-500 psi
- -40° to 125°C range
- mV output
- Accuracy 0.2%
- Stainless steel
82 Series
The 82 series is a 19mm small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. They are designed for o-ring mounting and OEM applications where compatibility with corrosive media is required. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element.
-
82CV
- 0-500 psi
- -40° to 125°C range
- mV output
- Accuracy 0.25%
- Stainless steel
82CV
The 82 constant voltage is a 19 mm small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless steel housing. The 82 constant voltage is designed for o-ring mounting and OEM applications where compatibility with corrosive media is required. The sensing package utilizes silicone oil to transfer pressure from the 316L stainless steel diaphragm to the sensing element. A ceramic substrate is attached to the package that contains laser-trimmed resistors for temperature compensation and offset correction.
-
MS5401 / MS5407 / MS5412
- 0-70 bar
- -40° to 125°C range
- High mV output
- High accuracy
- Low power
MS5401 / MS5407 / MS5412
The MS54XX SMD pressure sensor series is designed for pressure sensor systems with highest demands on resolution and accuracy. The device consists of a silicon micromachined pressure sensor die mounted on a 6.2 x 6.4 mm ceramic carrier or a 6.1 x 6.3 mm PCB protected by a metal or plastic cap. The MS54XX can be delivered in a high sensitivity version giving a maximal output voltage or in a high linearity version.
-
MS4525
- 0-150 psi
- -25° to 105°C range
- Amplified output
- 1% accuracy
- 3.3/ 5.0 Vdc supply
MS4525
This series contains both analog output (MS4515/MS4525) and digital output (MS4515DO/MS4525DO) where the digital output versions feature either I²C or SPI interface and provide 14-bit pressure as well as 11-bit temperature sensing.
-
MS4525DO
- 0-150 psi
- -25° to 105°C range
- Digital output
- 1% accuracy
- Low power
MS4525DO
The transducer is built using Measurement Specialties’ proprietary UltraStable™ process and the latest CMOS sensor conditioning circuitry to create a low cost, high performance Digital Output Pressure (14bit) and Temperature (11bit) transducer designed to meet the strictest requirements from OEM customers.
-
MS5607
- 10-1200mbar
- -40° to 85°C range
- Accuracy 1.5mbar
- Low power, 1 µA (standby < 0.15 µA
MS5607
The MS5607-02BA is a new generation of high resolution altimeter sensors from MEAS Switzerland with SPI and I2C bus interface. It is optimized for altimeters and variometers with an altitude resolution of 20 cm.