Acceleration & Vibration

A wide range of accelerometers spanning technologies and applications used within OEM and Test and Measurement industries.

  1. Board Mount/ Embedded Accelerometer

    Board Mount/ Embedded Accelerometer

    Our board level Accelerometers are designed to be embedded into our customer’s vibration monitoring systems.

    View Product Category

  2. High Temperature Accelerometer

    A range of Charge Mode piezoelectric accelerometers with operating temperature ranges to 260ºC.

    View Product Category

  3. Hermetically Sealed Accelerometer

    Accelerometers sealed to IP67 or above to suit the harshest environments.

    View Product Category

  4. Miniature Accelerometer

    DC and AC accelerometers designed for testing of lightweight components or for use in confined spaces.

    View Product Category

  5. Single Axis Accelerometer

    Single Axis accelerometers using various technologies to suit a wide array of applications and industry.

    View Product Category

  6. Piezo Electric/ IEPE Accelerometer

    Our Piezoelectric Accel's support the test & instrumentation, transportation and aerospace markets. Key features include high frequency response, wide ranges and rugged construction.

    View Product Category

  7. Test & Measurement Accelerometer

    We offer a full range of sensors for component testing for various industries.

    View Product Category

  8. Tri-Axial Accelerometer

    Tri-axial accelerometers designed using DC and AC technology for testing of in a variety of applications and industry.

    View Product Category

  1. 3255A

    3255A

    • 0-500g range
    • -54 to 121°C range
    • mV output
    • Upto 1500Hz
    • Board mount

    3255A

    The Model 3255A is a signal conditioned board mountable MEMS accelerometer. The package can be mounted in one of two orientations, allowing the measurement axis to be either parallel or perpendicular to the mounting surface without the use of costly brackets. The accelerometer incorporates integral temperature compensation.

  2. 805M1

    805M1

    • 0-200g range
    • -54 to 100°C range
    • IEPE
    • Up to 12kHz
    • Board mount IEPE

    805M1

    The Model 805M1 is a miniature adhesive mount voltage output accelerometer built on a 3-pin TO-5 header. 

  3. 834M1

    834M1

    • 0-6000g range
    • -40 to 125°C range
    • mV output
    • Up to 6000Hz
    • Low power

    834M1

    The Model 834M1 is a low cost, board mountable triaxial accelerometer designed for high amplitude embedded shock applications. The accelerometer features a maximum current consumption of 22 micro-amps and incorporates full power and signal conditioning.

  4. 52M30

    52M30

    • 0-2000g range
    • -40 to 90°C range
    • mV output
    • Up to 7000Hz
    • NIST calibration

    52M30

    The Model 52M30 accelerometer has an advanced piezoresistive MEMS sensing element which offers excellent dynamic range and stability. This unit features a full bridge output.

  5. 64B

    64B

    • 0-6000g range
    • 0 to 50°C range
    • mV output
    • Up to 7000Hz
    • J211 triaxial accelerometer

    64B

    The Model 64B accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit features a full bridge output configuration.

  6. 64C

    64C

    • 0-6000g range
    • 0 to 50°C range
    • mV output
    • Up to 7000Hz
    • Auto safety accelerometer

    64C

    The Model 64C accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit is ideal for impact crash testing.

  7. 3801A

    3801A

    • 0-2000g range
    • -55 to 125°C range
    • mV output
    • Up to 4000Hz
    • MEMS sensor

    3801A

    The Model 3801A is an mV output piezoresistive accelerometer in a rugged hermetic package. The accelerometer incorporates mechanical stops for over-range protection up to 10,000g. 

  8. 4600 / 4602

    4600 / 4602

    • 0-500g range
    • -55 to 125°C range
    • Amplified output
    • Up to 1500Hz
    • Gas damped

    4600 / 4602

    The Model 4600 & 4602 are designed for both static and dynamic measurements in critical and demanding applications. 

  9. 4810A

    4810A

    • 0-500g range
    • -55 to 125°C range
    • mV output
    • Upto 1500Hz
    • Gas damped

    4810A

    The Model 4810A is a low noise signal conditioned accelerometer in a welded stainless steel package.  The accelerometer offers an amplified signal conditioned output.

  10. 53/53A

    53/53A

    • 0-2000g range
    • -20 to 85°C range
    • mV output
    • Up to 4500Hz
    • Crash testing

    53/53A

    The Model 53 accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. This sensor is easily mounted in hard to reach places on vehicles under test.

  11. 606M1

    606M1

    • 0-25g range
    • -20 to 85°C range
    • mV output
    • Up to 1000Hz
    • Seat pad triaxial

    606M1

    The Model 606M1 is a MEMS triaxial seat pad accelerometer with both static and dynamic responses designed specially for characterising whole body vibration in accordance with ISO 2631-1 and ISO 8041. The DC response of the silicon MEMS sensors is the key to yield accurate velocity and displacement results from the raw acceleration data.

  12. 7100A

    7100A

    • 0-500g range
    • -55 to 150°C range
    • V output
    • Up to 15KHz
    • TEDS compliance

    7100A

    The Model 7100A is a high performance IEPE accelerometer and is hermetically sealed and features the popular through hole mount installation for use with standard mounting screws.

  13. 7101A

    7101A

    • 0-100g range
    • -55 to 125°C range
    • V output
    • Up to 10KHz
    • Miniature

    7101A

    The accelerometer is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >10kHz utilizing stable piezo-ceramic crystals in annular shear mode. The model 7101A features a hermetically sealed titanium housing and the popular through hole mount configuration. 

  14. 7132A

    7132A

    • 0-2000g range
    • -55 to 125°C range
    • V output
    • Up to 12000Hz
    • Miniature triaxial

    7132A

    The Model 7132A features a hermetically sealed titanium construction with a 4-pin Microtech connector interface. The model 7132A incorporates stable piezo-ceramic crystals in annular shear mode which provide a flat frequency response up to >12kHz.

  15. 7120A

    7120A

    • 0-500g range
    • -55 to 100°C range
    • V output
    • Up to 7000Hz
    • Miniature IEPE 

    7120A

    The Model 7120A is a high performance IEPE accelerometer designed for modal applications. 

  16. 7500A

    7500A

    • 0-3500g range
    • -73 to 260°C range
    • IEPE
    • Up to 15000Hz
    • Through hole mount

    7500A

    The Model 7500A is a piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. The accelerometer incorporates an annular shear mode crystal that provides stable thermal response up to +260°C.

  17. 7501A

    7501A

    • 0-4000g range
    • -73°C to 260°C range
    • 5.6pC/g output
    • Up to 10kHz
    • Charge output accelerometer

    7501A

    The Model 7501A is a miniature piezoelectric charge mode accelerometer with a very high temperature range.

  18. 7502A

    7502A

    • 0-5000g range
    • -73 to 260°C range
    • IEPE
    • Up to 14000Hz
    • Titanium housing

    7502A

    The Model 7502A is a miniature piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. The accelerometer incorporates an annular shear mode crystal that provides stable thermal response.

  19. 7514A

    7514A

    • 0-2000g range
    • -73 to 260°C range
    • IEPE
    • Up to 14KHz
    • Miniature IEPE

    7514A

    The Model 7514A is a stud mounted piezoelectric charge mode accelerometer. The accelerometer is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >14kHz with a nominal charge output of 50pC/g.

  20. 7202A

    7202A

    • 0-500g range
    • -55 to 130°C range
    • V output
    • Up to 15KHz
    • Ideal for HUMS

    7202A

    The Model 7202A is a case isolated high temperature IEPE accelerometer with internal shielding. The accelerometer has a flat bandwidth up to 15kHz with a resonant frequency greater than 40kHz.

  21. 3022

    3022

    • 0-200g range
    • -40 to 125°C range
    • mV output
    • Upto 2000Hz
    • Gas damped

    3022

    The Model 3022 is a piezoresistive silicon accelerometer packaged in a ceramic substrate with a sealed ceramic cover. The ceramic provides an excellent bonding surface for the customers application specific adhesive. The accelerometer consists of a micro machined silicon mass suspended by multiple beams from a silicon frame. Piezoresistors located in the beams change their resistance as the motion of the suspended mass changes the strain in the beams. Silicon caps on the top and bottom of the device are added to provide overrange stops. This design provides for a very low profile, high shock resistance, durability and built-in damping over a wide usable bandwidth. For an accelerometer with a mounting bracket designed to bolt the sensor to a mounting location, see the Model 3028. Please refer to the Models 3052 and 3058 for accelerometers with integral temperature compensation.

  22. 3052

    3052

    • 0-100g range
    • -40 to 125°C range
    • mV output
    • Upto 1500Hz
    • Gas damped

    3052

    The Model 3052 is a piezoresistive silicon accelerometer with integral temperature compensation. It is packaged on a ceramic substrate with an epoxy sealed ceramic cover and is designed for adhesive mounting. The accelerometer consists of a micro machined silicon mass suspended by multiple beams from a silicon frame. Piezoresistors located in the beams change their resistance as the motion of the suspended mass changes the strain in the beams. Silicon caps on the top and bottom of the device are added to provide over-range stops.

  23. 3038

    3038

    • 0-600g range
    • -55 to 125°C range
    • mV output
    • Upto 6000Hz
    • Board mountable

    3038

    The Model 3038 is a hermetically sealed SMD accelerometer designed for high performance applications. The accelerometer incorporates a 2nd generation piezoresistive MEMS sensing element providing outstanding long-term stability. The Model 3038 provides a mV output signal and features mechanical overload stops that provide shock protection to 10,000g. 

  24. 805

    805

    • 0-500g range
    • -54 to 100°C range
    • IEPE
    • Up to 15kHz
    • Board mount IEPE

    805

    The Model 805 is a miniature adhesive mount IEPE accelerometer built on a 3-pin TO-5 header. The accelerometer features a hermetic construction in a TO-5 header configuration. The model 805 incorporates a stable piezo-ceramic crystal and an integrated charge converter amplifier in a 100% shielded housing suitable for many embedded OEM applications.

  25. 834

    834

    • 0-6000g range
    • -20 to 80°C range
    • mV output
    • Up to 2000Hz
    • Low power

    834

    The Model 834 is a low cost, board mountable triaxial accelerometer designed for high amplitude embedded shock applications. The accelerometer features a maximum current consumption of 4 micro-amps and incorporates full power and signal conditioning.

  26. 64

    64

    • 0-6000g range
    • -40 to 121°C range
    • mV output
    • Up to 7000Hz
    • J211 triaxial accelerometer

    64

    The Model 64 accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit features a full bridge output configuration with temperature compensation.

  27. 1201

    1201

    • 0-1000g range
    • -0 to 50°C range
    • mV output
    • Up to 3000Hz
    • Adhesive mount

    1201

    The Model 1201 accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. This sensor is easily mounted in hard to get places on vehicles under test.

  28. 3700

    3700

    • 0-6000g range
    • -55 to 125°C range
    • mV output
    • Up to 6000Hz
    • Gas damped

    3700

    The Model 3700 is a MEMS piezoresistive shock accelerometer in a rugged stainless steel package. The accelerometer is ideal for long duration shock transient measurements. It incorporates mechanical over-range stops and is packaged in an industry standard footprint.

  29. 63

    63

    • 0-2000g range
    • -20 to 85°C range
    • mV output
    • Up to 3000Hz
    • Miniature

    63

    The Model 63 accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications.

  30. 4630

    4630

    • 0-500g range
    • -55 to 125°C range
    • Amplified output
    • Up to 2000Hz
    • Signal conditioned

    4630

    The Model 4630 is a low noise triaxial accelerometer offering both static and dynamic response. The piezoresistive accelerometer incorporates integral temperature compensation that provides a stable output over a wide operating range. The three independent circuit assemblies are hermetically sealed and can operate on common or separate power supplies. The advanced MEMS sensing elements are gas damped in order to provide a wide stable frequency response.

  31. 4203

    4203

    • 0-30g range
    • -40 to 85°C range
    • Amplified output
    • Up to 60Hz
    • EMI/ RFI protection

    4203

    The Model 4203 triaxial accelerometer is designed with performance and reliability in mind. The rugged piezoresistive MEMS sensing element comes straight from our world renowned crash test accelerometers. The internal ASIC amplifier originally designed for missile applications performs sensitivity and zero compensation 20 times per second over its operating temperature.

  32. 8011

    8011

    • 0.5 to 5.0 in/sec
    • -40 to 100°C range
    • 4-20mA output
    • Up to 1000Hz
    • Velocity transmitter

    8011

    The Model 8011 is an internally shielded rugged 4-20mA velocity transmitter. The transmitter is available in ranges from 0.5 to 5.0 in/sec, in either RMS or Peak velocity output options. The model 8011 features a top exit MIL-C-5015 connector.

  33. 1203

    1203

    • 0-1000g range
    • 0 to 50°C range
    • mV output
    • Up to 3000Hz
    • High overload

    1203

    The Model 1203 accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 50 g to 1000 g and frequency response to 3000 Hz, this sensor is easily mounted in hard to reach places on vehicles under test.

  34. 1210F

    1210F

    • 200g range
    • -40 to 100°C range
    • mV output
    • Up to 1800Hz
    • Ratiometric output

    1210F

    The Model 1210F accelerometer is a small, compact uniaxial MEMS accelerometer designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. Featuring ranges from 2g to 200g and frequency response to 2000 Hz, this sensor is easily mounted in hard to get places on vehicles under test.

  35. 3028

    3028

    • 0-200g range
    • -40 to 125°C range
    • mV output
    • Upto 2000Hz
    • Gas damped

    3028

    The Model 3028 is a piezoresistive silicon accelerometer packaged on a ceramic substrate with a metal bracket which can be used to bolt the sensor to the mounting location. The accelerometer consists of a micro machined silicon mass suspended by multiple beams from a silicon frame.

  36. 4801A

    4801A

    • 0-500g range
    • -55 to 125°C range
    • V output
    • Up to 1800Hz
    • Detachable cable

    4801A

    The Model 4801A is a true hermetically sealed accelerometer in a rugged stainless steel package. The sensor offers an amplified signal conditioned output.

  37. 68C

    68C

    • 0-2000g range
    • -20 to 85°C range
    • mV output
    • Up to 3000Hz
    • J211 triaxial accelerometer

    68C

    The Model 68C accelerometer is a small, compact triaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications.This sensor is easily mounted in hard to reach places. This accelerometer is compliant with J211 specifications for anthropomorphic dummy applications.

  38. 64L

    64L

    • 0-6000g range
    • 0 to 50°C range
    • mV output
    • Up to 4500Hz
    • Auto safety accelerometer

    64L

    The Model 64L accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. The Model 64L is compliant with SAE J211 standards for anthropomorphic dummy instrumentation.

  39. 1201F

    1201F

    • 0-1000g range
    • -20 to 85°C range
    • mV output
    • Up to 3000Hz
    • Overload stops

    1201F

    The Model 1201F accelerometer is a small, compact uniaxial device designed for vehicle impact and road testing. Its mechanical overload stops provide high shock protection in rugged applications. This sensor is easily mounted in hard to get places on vehicles under test.

  40. 52F

    52F

    • 0-2000g range
    • -40 to 90°C range
    • mV output
    • Up to 7000Hz
    • Flange mounting

    52F

    The Model 52F accelerometer has an advanced piezoresistive MEMS sensing element which offers excellent dynamic range and stability. This unit features a full bridge output.

  41. EGAX / EGAXT

    EGAX / EGAXT

    • 0-2500g range
    • -40 to 120°C range
    • mV output
    • Up to 3000Hz
    • Low mass

    EGAX / EGAXT

    The Model EGAX / EGAXT miniature accelerometers combine a damping ratio of 0.7 (Nominal) with built-in over-range stops that protect the unit against 10,000g shocks. This is ideal for applications which may experience rough handling or in situations where the accelerometer must survive a high initial overload in order to make a low g measurement. 

  42. EGAXT3

    EGAXT3

    • 0-2500g range
    • -40 to 120°C range
    • mV output
    • Up to 3000Hz
    • DC response

    EGAXT3

    The Model EGAXT3 miniature triaxial accelerometer combines a damping ratio of 0.7 (Nominal) with built-in over-range stops that are set to protect the unit against 10,000g shocks. This is ideal for applications which may experience rough handling or in situations where the accelerometer must survive a high initial overload in order to make a low g measurement. These units feature a Wheatsone Bridge output with compensated temperature range of 20 to 80 °C.

  43. 4000A/4001A

    4000A/4001A

    • 0-200g range
    • -20 to 85°C range
    • Amplified output
    • Up to 1500Hz
    • Rugged

    4000A/4001A

    The Model 4000A & 4001A are economical signal conditioned accelerometers with integral temperature compensation. The accelerometers incorporate a 3rd generation silicon MEMS sensor providing outstanding performance. The accelerometers are packaged in a rugged aluminum housing ideal for transportation and instrumentation testing. The signal conditioned output incorporates a 2.5V reference that offers the user a differential or single-ended output.

  44. 7102A

    7102A

    • 0-2000g range
    • -55 to 125°C range
    • V output
    • Up to 11KHz
    • Titanium body

    7102A

    The accelerometer features a welded hermetic titanium construction with an M3 connector. The miniature and light weight titanium package renders the accelerometer ideal for applications requiring minimal mass loading.

  45. EGAS3

    EGAS3

    • 0 to 2500g range
    • -40 to 120°C range
    • mV output
    • Up to 3500Hz
    • Triaxial

    EGAS3

    The Model EGAS3 is a cube-shaped, triaxial accelerometer. Operating from 15 Vdc, this unit features a transverse sensitivity of 2% MAX and damping of 0.7. Over-range stops ensure survivability of the unit under extreme shock conditions while its temperature performance offers a minimal zero shift.

  46. EGAS

    EGAS

    • 0-2500g range
    • -40 to 120°C range
    • mV output
    • Up to 3500Hz
    • Damping Ratio 0.7

    EGAS

    The Model EGAS is a miniature, uniaxial accelerometer. The EGAS is the unit of choice for measurement professionals in the automotive, military, aerospace and transportation industries. Its combined nonlinearity and hysteresis of +/- 1% makes the EGAS well-suited for on-site testing as well as laboratory use.

  47. 201

    201

    • 0-50g range
    • -40 to 125°C range
    • mV output
    • Up to 4000Hz
    • Damping ratio 0.7

    201

    The Model 201 is a low noise accelerometer offering both static and dynamic response. The accelerometer is packaged in an anodized aluminum housing with an integral cable.

  48. 52

    52

    • 0-2000g range
    • -40 to 90°C range
    • mV output
    • Up to 7000Hz
    • Auto safety accelerometer

    52

    The Model 52 accelerometer is based on an advanced piezoresistive MEMS sensing element which offers exceptional dynamic range and stability. This unit features a full bridge output configuration.

  49. 3058

    3058

    • 0-100g range
    • -40 to 125°C range
    • mV output
    • Upto 1500Hz
    • Gas damped

    3058

    The Model 3058 is a piezoresistive silicon accelerometer with integral temperature compensation. It is packaged on a ceramic substrate with a metal bracket which can be used to bolt the sensor to the mounting location. The accelerometer consists of a micro machined silicon mass suspended by multiple beams from a silicon frame.

  50. 7204A

    7204A

    • 0-500g range
    • -55 to 130°C range
    • mV output
    • Up to 15000Hz
    • High resonance

    7204A

    The Model 7204A is a case isolated high temperature IEPE accelerometer with internal shielding. The accelerometer has a flat bandwidth up to greater than 15kHz with a resonant frequency greater than 40kHz. 

  51. 4610

    4610

    • 0-500g range
    • -40 to 120°C range
    • Amplified output
    • Up to 3500Hz
    • Gas damped

    4610

    The Model 4610 is a low noise signal conditioned accelerometer with exceptional long-term stability. The accelerometer offers integral temperature compensation and a hermetically sealed sensor assembly. The Model 4610 is offered in ranges from 2 to 500g and incorporates mechanical overload stops that provide shock protection to 10,000g. The 3rd generation MEMS element incorporates gas damping that offers a wide dynamic range and stable frequency response.

  52. 832

    832

    • 0-500g range
    • -20 to 80°C range
    • mV output
    • Up to 2000Hz
    • Low power

    832

    The Model 832 is a low cost, board mountable triaxial accelerometer. Featuring stable piezo-ceramic crystals, the accelerometer incorporates full power and signal conditioning with a maximum current consumption of 4 micro-amps. 

  53. 832M1

    832M1

    • 0-500g range
    • -40 to 125°C range
    • mV output
    • Upto 6000Hz
    • Low power

    832M1

    The Model 832M1 is a low cost, board mountable triaxial accelerometer. Featuring stable piezo-ceramic crystals, the accelerometer incorporates full power and signal conditioning with a maximum current consumption of 22 micro-amps.

  54. 3031

    3031

    • 0-100g range
    • -40 to 125°C range
    • mV output
    • Upto 1500Hz
    • SMD Mount

    3031

    The Model 3031 is a piezoresistive SMD accelerometer designed for demanding high volume applications. The accelerometer is ideal for applications requiring a miniature light weight accelerometer with outstanding performance. The Model 3031 incorporates a 2nd generation MEMS sensing element providing superior long-term stability. The accelerometer provides a millivolt output signal and features mechanical overload stops that provide shock protection to 10,000g. For non-surface mount accelerometers please see Models 3022, 3028, 3052 or 3058.

  55. 7530A

    7530A

    • 0-4000g range
    • -73 to 200°C range
    • IEPE
    • Up to 6000Hz
    • Miniature IEPE

    7530A

    The Model 7530A is a triaxial piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. The accelerometer incorporates three independent annular shear mode crystal assemblies installed with a compression ring that eliminates the usage of epoxies that can affect long term stability at elevated temperatures. The annular shear crystals also provide a stable thermal response up to +200 and a nominal charge output of 5.6pC/g which offers optimum signal to noise ratio.

  56. 7108A

    7108A

    • 0-500g range
    • -55 to 125°C range
    • V output
    • Up to 10KHz
    • Miniature IEPE

    7108A

    The Model 7108A is a miniature adhesive mount IEPE accelerometer available in ±50g to ±500g dynamic ranges. The accelerometer features a welded hermetic stainless steel construction with a 10-32 top connector. The model 7108A incorporates a stable piezo-ceramic crystal in annular shear mode, installed with a compression ring that eliminates the usage of epoxies that can affect long term stability. The accelerometer has an operating range of -55°C to +125°C and a flat frequency response to 10kHz.

  57. 7131A

    7131A

    • 0-2000g range
    • -55 to 125°C range
    • V output
    • Up to 9000Hz
    • Miniature triaxial

    7131A

    The accelerometer features a hermetically sealed Titanium construction with a 4-pin Microtech connector interface. The model 7131A incorporates stable piezo-ceramic crystals in annular shear mode which provide a flat frequency response up to >10kHz.

  58. EGCS-S425

    EGCS-S425

    • 0-2000g range
    • -20 to 80°C range
    • mV output
    • Up to 2000Hz
    • Oil damped

    EGCS-S425

    The Model EGCS-S425 is a small ISO 6487 and SAE J211 compliant piezoresistive accelerometer. This unit features internal temperature compensation, anodized aluminum alloy housing and flexible cable output. This sensing element is damped with fluid to extend useful frequency range and reduce the effect of high frequencies.

  59. EGCS-A2/B2

    EGCS-A2/B2

    • 0-5000g range
    • -40 to 120°C range
    • mV or amplified output
    • Up to 2400Hz
    • Heavy duty

    EGCS-A2/B2

    The Model EGCS accelerometers combine a damping ratio of 0.7 (Nominal) with built-in over-range stops that are set to protect the unit against 10,000g shocks. This is ideal for applications which may experience rough handling or in situations where the accelerometer must survive a high initial overload in order to make a low g measurement. 

  60. EGCS3-D

    EGCS3-D

    • 0-5000g range
    • -40 to 120°C range
    • mV output
    • Up to 4000Hz
    • CE rating

    EGCS3-D

    The Model EGCS3-D triaxial accelerometer is available in ranges from ±5 g through ±5000 g. With over-range limit to ±10,000 g and spring strain relief, this rugged device is ideal for offshore, downhole and shock testing applications. Its small size and screw mounting ensure ease of installation, while its low power requirements and DC output facilitate integration into data acquisition and monitoring systems. The EGCS3 also features CE conformance to EN 61010-1, EN 50081-1 and EN 50082-1.

  61. EGCS-D1S

    EGCS-D1S

    • 0-5000g range
    • -40 to 120°C range
    • mV output
    • Up to 4000Hz
    • Damping ratio 0.7

    EGCS-D1S

    The Model EGCS accelerometer combines a damping ratio of 0.7 (Nominal) with built-in over-range stops that are set to protect the unit against 10,000g shocks. This is ideal for applications which may experience rough handling or in situations where the accelerometer must survive a high initial overload in order to make a low g measurement. These units feature a Wheatsone Bridge output with compensated temperature range.

  62. EGCS-DO

    EGCS-DO

    • 0-5000g range
    • -40 to 120°C range
    • mV output
    • Up to 4000Hz
    • Heavy duty

    EGCS-DO

    The Model EGCS accelerometers combine a damping ratio of 0.7 (Nominal) with built-in over-range stops that are set to protect the unit against 10,000 g shocks. This is ideal for applications which may experience rough handling or in situations where the accelerometer must survive a high initial overload in order to make a low g measurement. These units feature a Wheatsone Bridge output with compensated temperature range.

  63. 4332

    4332

    • 0-2 or 5g range
    • -40 to 85°C range
    • Amplified output
    • Up to 700Hz
    • IP68

    4332

    The Model 4332 is a low noise triaxial accelerometer offering both static and dynamic response. The accelerometer is packaged in an anodized aluminum housing and is offered in ±2g & ±5g range. The model 4332 features an integral cable and is certified to IP68 protection. The accelerometer incorporates a 50Hz LP filter and an operating temperature range of -40°C to +85°C.