Hermetically Sealed Accelerometer
Accelerometers sealed to IP67 or above to suit the harshest environments.
-
805M1
- 0-200g range
- -54 to 100°C range
- IEPE
- Up to 12kHz
- Board mount IEPE
805M1
The Model 805M1 is a miniature adhesive mount voltage output accelerometer built on a 3-pin TO-5 header.
-
3801A
- 0-2000g range
- -55 to 125°C range
- mV output
- Up to 4000Hz
- MEMS sensor
3801A
The Model 3801A is an mV output piezoresistive accelerometer in a rugged hermetic package. The accelerometer incorporates mechanical stops for over-range protection up to 10,000g.
-
4810A
- 0-500g range
- -55 to 125°C range
- mV output
- Upto 1500Hz
- Gas damped
4810A
The Model 4810A is a low noise signal conditioned accelerometer in a welded stainless steel package. The accelerometer offers an amplified signal conditioned output.
-
7100A
- 0-500g range
- -55 to 150°C range
- V output
- Up to 15KHz
- TEDS compliance
7100A
The Model 7100A is a high performance IEPE accelerometer and is hermetically sealed and features the popular through hole mount installation for use with standard mounting screws.
-
7132A
- 0-2000g range
- -55 to 125°C range
- V output
- Up to 12000Hz
- Miniature triaxial
7132A
The Model 7132A features a hermetically sealed titanium construction with a 4-pin Microtech connector interface. The model 7132A incorporates stable piezo-ceramic crystals in annular shear mode which provide a flat frequency response up to >12kHz.
-
7120A
- 0-500g range
- -55 to 100°C range
- V output
- Up to 7000Hz
- Miniature IEPE
7120A
The Model 7120A is a high performance IEPE accelerometer designed for modal applications.
-
7500A
- 0-3500g range
- -73 to 260°C range
- IEPE
- Up to 15000Hz
- Through hole mount
7500A
The Model 7500A is a piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. The accelerometer incorporates an annular shear mode crystal that provides stable thermal response up to +260°C.
-
7501A
- 0-4000g range
- -73°C to 260°C range
- 5.6pC/g output
- Up to 10kHz
- Charge output accelerometer
7501A
The Model 7501A is a miniature piezoelectric charge mode accelerometer with a very high temperature range.
-
7502A
- 0-5000g range
- -73 to 260°C range
- IEPE
- Up to 14000Hz
- Titanium housing
7502A
The Model 7502A is a miniature piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. The accelerometer incorporates an annular shear mode crystal that provides stable thermal response.
-
7514A
- 0-2000g range
- -73 to 260°C range
- IEPE
- Up to 14KHz
- Miniature IEPE
7514A
The Model 7514A is a stud mounted piezoelectric charge mode accelerometer. The accelerometer is designed for high frequency vibration and shock measurements and offers a wide bandwidth to >14kHz with a nominal charge output of 50pC/g.
-
7202A
- 0-500g range
- -55 to 130°C range
- V output
- Up to 15KHz
- Ideal for HUMS
7202A
The Model 7202A is a case isolated high temperature IEPE accelerometer with internal shielding. The accelerometer has a flat bandwidth up to 15kHz with a resonant frequency greater than 40kHz.
-
8011
- 0.5 to 5.0 in/sec
- -40 to 100°C range
- 4-20mA output
- Up to 1000Hz
- Velocity transmitter
8011
The Model 8011 is an internally shielded rugged 4-20mA velocity transmitter. The transmitter is available in ranges from 0.5 to 5.0 in/sec, in either RMS or Peak velocity output options. The model 8011 features a top exit MIL-C-5015 connector.
-
4801A
- 0-500g range
- -55 to 125°C range
- V output
- Up to 1800Hz
- Detachable cable
4801A
The Model 4801A is a true hermetically sealed accelerometer in a rugged stainless steel package. The sensor offers an amplified signal conditioned output.
-
7508A
- 0-4000g range
- -73 to 200°C range
- IEPE
- Up to 7000Hz
- Adhesive mount
7508A
The Model 7508A is a miniature piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements at temperatures up to +200°C. The accelerometer incorporates an annular shear mode crystal installed with a compression ring that eliminates the usage of epoxies that can affect long term stability at elevated temperatures.
-
7102A
- 0-2000g range
- -55 to 125°C range
- V output
- Up to 11KHz
- Titanium body
7102A
The accelerometer features a welded hermetic titanium construction with an M3 connector. The miniature and light weight titanium package renders the accelerometer ideal for applications requiring minimal mass loading.
-
7204A
- 0-500g range
- -55 to 130°C range
- mV output
- Up to 15000Hz
- High resonance
7204A
The Model 7204A is a case isolated high temperature IEPE accelerometer with internal shielding. The accelerometer has a flat bandwidth up to greater than 15kHz with a resonant frequency greater than 40kHz.
-
7530A
- 0-4000g range
- -73 to 200°C range
- IEPE
- Up to 6000Hz
- Miniature IEPE
7530A
The Model 7530A is a triaxial piezoelectric charge mode accelerometer designed for high frequency vibration and shock measurements. The accelerometer incorporates three independent annular shear mode crystal assemblies installed with a compression ring that eliminates the usage of epoxies that can affect long term stability at elevated temperatures. The annular shear crystals also provide a stable thermal response up to +200 and a nominal charge output of 5.6pC/g which offers optimum signal to noise ratio.
-
7108A
- 0-500g range
- -55 to 125°C range
- V output
- Up to 10KHz
- Miniature IEPE
7108A
The Model 7108A is a miniature adhesive mount IEPE accelerometer available in ±50g to ±500g dynamic ranges. The accelerometer features a welded hermetic stainless steel construction with a 10-32 top connector. The model 7108A incorporates a stable piezo-ceramic crystal in annular shear mode, installed with a compression ring that eliminates the usage of epoxies that can affect long term stability. The accelerometer has an operating range of -55°C to +125°C and a flat frequency response to 10kHz.
-
4332
- 0-2 or 5g range
- -40 to 85°C range
- Amplified output
- Up to 700Hz
- IP68
4332
The Model 4332 is a low noise triaxial accelerometer offering both static and dynamic response. The accelerometer is packaged in an anodized aluminum housing and is offered in ±2g & ±5g range. The model 4332 features an integral cable and is certified to IP68 protection. The accelerometer incorporates a 50Hz LP filter and an operating temperature range of -40°C to +85°C.