|
HCA Series - Hermetically Sealed The HCA Series LVDTs are tungsten-inert gas (TIG) welded to form a hermetic seal that is impervious to dirt, water, steam and corrosive liquids and vapors. They feature a glass-sealed, MS-type connector, but do not permit throughbore operation. (A right angle version – HCARA series -– allows the core and core rod to pass through the unit.) All exposed surfaces are stainless steel, including the boreliner and connector shell. Units can withstand external pressure up to 1,000 psi (70 bars). Double magnetic shielding resists external magnetic influences. | |
|
HCA Series - Hermetically Sealed, Radial Connector HCA-RA right angle series LVDTs are tungsten-inert gas (TIG) welded for hermetic sealing with an easy to install radial connector termination. A design improvement to the standard HCA series, the HCA-RA has a through bore design and a right angle connection for applications where product length is an issue. The HCA-RA series can withstand up to 1000psi of external pressure. The through bore design stops debris from being trapped inside the body. The HCA-RA radial connector mount saves space not only in the unit length, but also in the mating connectorand cable bending radius. | |
|
M12 Series High Accuracy Low Cost The new M-12 series coil design has been optimized to provide the best possible temperature coefficient of sensitivity, while maintaining suitability for operation with extended cable lengths. A seamless 400 series stainless steel case provides magnetic shielding for the noisiest electrical environments. | |
|
MP Series - Heavy Industrial The MP Series of LVDTs is suitable for heavy industrial use. Its coils are encapsulated in an anodized extruded aluminum housing, providing protection against electromagnetic and electrostatic interference. A heavy-duty terminal barrier strip replaces lead wires. A Teflon boreliner is standard equipment. | |
 |
XS-C Series The XS-C Series satisfies those applications involving measurement and control in pressure-sealed chambers, e.g., hydraulic actuators and pressure vessels where bulkhead mounting is permitted. It is a sealed, heavy-walled LVDT suitable for operating pressures up to 3000 psi (210 bars), and proof pressures up to 4500 psi (315 bars). The XS–C’s TIG-welded stainless steel housing is highly resistant to corrosive environments. Internal magnetic and electrostatic shielding render the XS–C insensitive to external magnetic influences. |
|
XS-D Series - Large Displacements The XS-D Series is particularly well suited for measuring relatively large displacements, but where installation space is limited. The XS–D has a substantially greater displacement range than standard LVDTs but without the accompanying increase in body length and weight. Special winding techniques permit linear range measurements up to 80 percent of the XS–D’s housing length. The LVDT, being a contactless device, experiences no wear whatsoever. The 400 series stainless steel housing provides magnetic shielding. |
