 |
1147/1149 Waterproof Edgewise format in watertight design conforms to MIL-M-10304. Used in naval installations, including nuclear submarines and deep-submergence rescue vehicles. Optionally available with red or white illumination. Case: heavy duty aluminum wiht glass crystal. Color: black. |
 |
2150 Waterproof Model 2150 is a rugged watertight instrument designed to meet the applicable requirements of MIL-M-10304 and MIL-M-16034. Used in naval shipboard installations, including nuclear submarines (3201-998 reference drawing No. c25514E). Optionally available with red or white illumination. Case: plated steel with glass crystal. Color: Black. |
 |
4202 Dual Axis Accelerometer Applications: Formula 1, NASCAR, IRL, Test & Measurement. Features:
· 8-16 Vdc Excitation · Ranges up to ±30 g’s full scale · Measures static & dynamic acceleration · Over shock protection to ±5,000 g’s · Operating temperature from -40 to 125°C · Built-in 8-pole low-pass filter · EMI/RFI protection · Linearity ±1% FS · Transverse sensitivity <1% available |
 |
4203 Tri-Axis Accelerometer Applications: Formula 1, NASCAR, IRL, Test and Measurement Features: • 8-16 Vdc Excitation • Ranges up to ±30 g’s full scale • Measures static & dynamic acceleration • Over shock protection to ±5,000 g’s • Operating temperature from -40 to 125°C • Built-in 8-pole low-pass filter • EMI/RFI protection • Linearity ±1% FS • Transverse sensitivity <1% available |
 |
4318 Amplifier The 4318 amplifier is a straightforward digital set-up analogue amplifier that offer high performance and great versatility. The amplifier is addressable and can be ganged together in up to 16 units. |
 |
701 Ceramic Cement A ceramic cement suitable for up to 700°C |
 |
7108A The model 7108A s a miniature adhesive mount IEPE accelerometer available in ±50g to ±500g dynamic ranges. The accelerometer has an operating range of -55°C to +125°C and a flat frequency response to 10kHz. |
 |
82 UltraStable High performance, high stability for OEM applications Pressure as low as 1psi |
 |
832 Triaxial Accelerometer ±100g to ±500g Dynamic Range |
 |
85 Flush Mount Minimizes trapped volume of fluid in front of diaphragm |
 |
85 UltraStable Modular design |
 |
86 UltraStable High performance, high stability for OEM applications Small diameter |
 |
86A Small diameter, amplified output Bar ranges available |
 |
87N
|
 |
AAL/DPL2 High resolution Minimal temperature drift On-board EEPROM cal data |
|
AC-21 Accelerometer • +/-2g to +/-500g Dynamic Range Temperature Compensated • Robust Strain Relief Low Power Consumption • Gas Damping DC Low Frequency Response • 0.5 – 4.5 VDC Output 5-30Vdc Excitation
| |
 |
ACH01 Extremely high bandwidth Low cost Ultra-low power |
 |
ATA-2001 2.5, 5.0 and 10.0 kHz Switch Selectable ExcitationDigital FilteringSwitch Selectable 115 or 220 VACVoltage and Current Outputs1/8 DIN Standard Panel MountingSplashproof Front Panel with Status LEDs |
 |
AZ43 Ceramic Cement |
 |
AccuStar Compact Low power Vertical & horizontal mount |
 |
AccuStar IP66 EMI+RFI rated CE pending Water tight enclosure |
 |
AccuStar Protractor System Stand alone system Separate sensor & display Zero control |
|
Application Directions for WC-16 + AZ43 | |
 |
Applications of Modern Auto Photoelasticity Photoelastic methods give full field analysis of strain levels and direction, these can be used directly for design evaluation or can be used to indicated where further analysis, eg by strain gauge, is needed. |
 |
Bolt-On Strain Sensors Bolt-on sensors are strain gauge systems that can readily be added to larger structures to measure deflection. They are used for low accuracy weighing and overload sensing. |
 |
Bonding Tips |
 |
C1W1M Hollow Loadcell - NMB Used mainly for ram force measurement on plastic extrusion machinery. |
 |
C2B1- NMB 250kg to 4000kg. Shear beam typically used in larger platform scales, one at each corner. Hermaetically sealed stainless steel construction. |
 |
C2D1- NMB 100 kg to 1500kg. High capacity weighing load cell for platforms. |
 |
C2G1- NMB 6kg to 35kg for platform weghing. OIML and NTEP approved. |
 |
C2T1- NMB Low cost shear beam. |
 |
CB004 - NMB 10kg to 100kg. Loadcell for platform weighing. OIML approved to 6000D. |
 |
CB14 - NMB 100kg -300kg Single point load cell for platform weighing. OIML certified. |
 |
CB17 - NMB 600g to 3kg. Loadcell for small platform weighing. |
 |
CBE1 - NMB 5kg to 200kg stainless steel shear beam. |
 |
CC002 - NMB 10te to 30te self aligning load cell for large platforms and weighbridges. |
 |
CCP1 - NMB 20kg to 100te. For hopper, tank and weighbridge systems |
 |
CCP1-Z - NMB 200kg to 50te Explosion-proof load cell. Single and dual bridge. |
 |
CCS1 - NMB 50te to 500te compression load cell for high temperature use to 250C. |
 |
CLS-1 - NMB Tension plate load cell |
 |
CMM1 - NMB 50kg to 20te. Low profile compression loadcell. Stainless steel. |
 |
CMP1 - NMB 250kg to 20te. High accuracy low profile load cell. Stainless steel. |
 |
CWV1 - NMB Low profile loadcell for weighing and force measurement. High sideload capability. |
 |
Custom Designed Loadcells and Sensors StrainSense specialise in providing custom solutions for most force, weighing, pressure and strain measurements as well as offering high quality competitive products for everyday applications. |
 |
D Series Rugged Sensing TechnologyStandard RS-232 Comms.Linearized Analog & Digital OutputExcellent Cost/Performance RatioEasy Sytsem IntegrationCE-approved for Europe |
 |
D Series Inclinometer Our newest generation of conductive, inclinometers offermodern SMD technology in an environmentally protected androbust, aluminium housing. |
 |
D-2209 -Flange with Spigot. -0.2% Accurancy-1 to 5 Nm |
 |
D-2223 -Internal square ends. -0.2% Accurancy-0 to 3,000Nm |
 |
D-2268 -Flange faces both ends. -0.1% Accurancy-0 to 5,000Nm |
 |
D-2431 -1/4" Hexagon Drive-0.1 Accurancy-0 to 20 Nm |
 |
D-2452 -Plain shatf-0.2% Accurancy-0 to 20,000Nm |
 |
D-2553 -Flange with Large Through Hole and Center Counter Bore.-0.1% Accurancy-10 to 200Nm |
|
DC-EC AccuSens The DC–EC AccuSens™ Series incorporates a uniquemonolithic chip combined with a computer-designedAC LVDT to achieve premium performance.The ratiometric design of the monolithic circuitrycompensates for power supply deviationsfor continuously stable operation.Unaffected by input variations, thetransducer provides highly accurate, repeatable measurement. | |
|
DC-SE Series The DC–SE series has been designed to meettoday’s requirements for operation from a singleendedpower supply. The output is also singleendedover the full range displacement of theLVDT making the unit compatible with unipolarinputs on analog-to-digital converters andprogrammable logic controllers, etc. | |
 |
DF-30 -Flange faces, standard bolt sizes. -0.2% Accurancy-0 to 20,000Nm |
 |
DFW-25 -Keyway and Flange ends. -0.2% Accurancy-0 to 1,000Nm |
 |
DFW-35 -Standard square end with flange. -0.2% Accurancy-0 to 2,000Nm |
 |
DH-15 -Overload protection to 2Nm. -0.2% Accurancy-0 to 20Nm |
 |
DP86 Wet/wet differential pressure |
 |
DPL2 Series The new DPL2-series dual axes conductiveinclinometer module offers the user the mostmodern SMD technology on a FR4 board withintegrated characteristic curve linearization andactive temperature compensation.This inclinometer module is available with+/-2°, +/-5°, +/-10°,+/-15° and +/-30 ° anglemeasurement ranges with various levels ofaccuracy. |
 |
DQG2 Package Metal package, 2 axes Type Inclination sensor system Range ±25° Unique Feature - Low cost unit- Protection class IP 66- Easy to handle- Fast response time Accuracy ±0.3° Operating Temp -40° to 85°C Typical Apps Fork lift, RV-leveling,man lift, truck levelling,harvester, tip over protection Legacy Brand MEAS |
 |
DQL2 Package Board, 2 axes Type Inclination Sensor Module Range ±25° Unique Feature - Low cost- Low current consumption- Micro controller on-board Accuracy ±0.3° Operating Temp -25° to 85°C Typical Apps RV-leveling, man lift, antennapositioning, aligning, levelcontrol Legacy Brand HLPlanar |
 |
DR-1 -Square ends.-0.1% Accuracy Class.-0 to 5,000Nm. |
 |
DR-12 -Integrated angle controls.-Keyway shaft ends-0.1 Accurancy-0 to 5,000Nm |
 |
DR-2 -Keyway shaft ends-0.1 Accurancy-0 to 500Nm |
 |
DR-20 -Integrated speed angle control.-Keyway shaft ends-0.1 Accurancy-0 to 500Nm |
 |
DR-2112 -±5V analogue output.-Plain shaft.-0.1% Accurancy.-0 to 20 000Nm |
 |
DR-2112-R -±5V analogue output.-Plain shaft.-0.2% Accurancy.-0 to 1,000Nm |
 |
DR-2113 -±5V analogue output.-Square drives.-0.1% Accurancy.-1 to 5000Nm |
 |
DR-2114 -±5V analogue output.-1/4" Hexagon drive.-0.1% Accurancy.-0 to 20Nm |
 |
DR-2153 -±5V analogue output.-Plain shaft.-0.1% Accurancy.-0 to 20Nm |
 |
DR-2208 -±5V analogue output.-Plain shaft.-0.1% Accurancy.-Dual range sensor 1/10...2000/20000 |
 |
DR-2212 -±5V analogue output.-Plain shaft.-0.1% Accurancy.-0 to 20,000Nm |
 |
DR-2212-R -±5V analogue output.-Plain shaft.-0.2% Accurancy.-0 to 1,000Nm |
 |
DR-2291 -1/4" hexagone drive.-0.1 Accurancy.-0 to 20Nm |
 |
DR-2335 -1/4" hexagone drive.-0.1 Accurancy.-0 to 20Nm |
 |
DR-2371 -±5V analogue output.-Sample rate 10k.-0.2% Accurancy.-100N/2Nm to 500N/5Nm |
 |
DR-2412 -RS485 Interface.-Sample rate 4k.-0.1% Accurancy.-0 to 20 000Nm |
 |
DR-2412-R -±5V analogue output.-Plain shaft.-0.2% Accurancy.-0 to 1,000Nm |
 |
DR-2413 -RS485 Interface.-Sample rate 4k.-0.1% Accurancy.-0 to 5,000Nm |
 |
DR-2414 -±5V analogue output.-1/4" hexagon drive.-0.2% Accurancy.-0 to 20Nm |
 |
DR-2453 -RS485 Interface.-Sample rate 4k.-0.1% Accurancy.-0 to 20Nm |
 |
DR-2477 -±5V analogue output.-Plain shaft.-0.25% Accurancy.-0 to 200Nm |
 |
DR-2493 -±5V analogue output.-Square ends.-0.25% Accurancy.-0 to 5,000Nm |
 |
DR-2494 -±5V analogue output.-1/4" Hexagon drive.-0.25% Accurancy.-0 to 20Nm |
 |
DR-2500 -±5V analogue output.-Plain shaft.-0.1% Accurancy.-Miniature Torque Sensor without Bearings-0 to 150Nm |
 |
DR-2508 -±5V analogue output.-Plain shaft.-0.1% Accurancy.-Dual range sensor 1/10 to 2000/20000 |
 |
DR-2512 -RS485 Interface.-Sample rate 4k.-0.1% Accurancy.-0 to 20,000Nm |
 |
DR-2512-R -±5V analogue output.-Plain shaft.-0.2% Accurancy.-0 to 1,000Nm |
 |
DR-2531 -±5V analogue output.-Plain shaft.-0.1% Accurancy.-0.5/5 to 1000/10000 Nm |
 |
DR-2554 -±5V analogue output.-Clamping Ring Hub / Radial Clamping Hub Keyway-0.05 to 0.15% Accurancy.-0 to 1,000Nm |
 |
DR-2600 -±5V analogue output.-Plain shaft.-0.1% Accurancy.-Miniature Torque Sensor without Bearings-0 to 150Nm |
 |
DR-2831 -±5V analogue output.-Plain shaft.-0.1% Accurancy.-0.5/5 to 1000/10000 Nm |
 |
DT1 & SDT1 Thin, flexible, robust Withstands up to 1% strain Ultra-low power (self generating) |
 |
DV-14 -Square ends. -0.2% Accurancy-0 to 5,000Nm |
 |
Double Shear Pins Simply replace a clevis pin or sheave axle with a strain gauged pin and have weighing, force measurement or overload protection without changing the profile of the system |
 |
Dynamic Sensors from Measurement Specialties A shortform catalogue covering the ranges of pressure, force and vibration products from Measurement Specialties. Brochure |
 |
E Series The E Series of LVDTs is economical andsatisfies numerous applications whereLVDT performance and reliability aredesired, but where budgets are limited.Linearity is 0.5% of full-range for all unitsexcept the E2000. The E series isparticularly suitable for moderateoperating temperatures. Its ruggedconstruction will resist the shocks andvibrations encountered in most industrialapplications. The E series is housed inmagnetic stainless steel for protectionagainst electromagnetic and electrostaticinterference. |
 |
ED-18 Medium duty with sleeve bearing |
 |
ED-19 Magnetic Sensing TechnologyEncapsulated Electronics/Sealed unitHarsh Environment CompatibilityQuadrature OutputsLow ProfileConsistent Rotational TorqueResistant to ContaminationIP52 SealingMetallic Threaded Bushing MountingWide Operational TemperatureRange (–40ºC to 85ºC)Custom Housings, Shafts, ConnectorsAvailable in Most Cases with NoAdditional Tooling RequiredSleeve BearingExcellent Stability - No OpticalDegradation |
 |
ED-20 Magnetic Sensing TechnologyEncapsulated Electronics/Sealed unitHarsh Environment CompatibilityQuadrature OutputsHigh or Low Voltage Differential or NPN(Open Collector) OutputsIndex Channel @ 180º (2 Pulses Per Rotation)Low ProfileConsistent Rotational TorqueResistant to ContaminationIP52 SealingMetallic Threaded Bushing MountingWide Operational Temperature Range(–40ºC to 85ºC)Custom Housings, Shafts, ConnectorsAvailable in Most Cases with NoAdditional Tooling RequiredExcellent Stability - No Optic Degradation |
 |
ED-21 Medium duty with ball bearing |
 |
ED-22/23 Medium duty with sleeve bearing |
 |
ED-30 Sealed IP67Low PowerLow Cost / OEMNo Range LimitEasy Installation and Set UpTolerates Hostile Environments Likedirt and Vibration |
 |
ED-31 Sealed IP67Low PowerLow Cost / OEMNo Range LimitEasy Installation and Set UpTolerates Hostile Environments Likedirt and Vibration |
|
EG Accessories EG Accelerometer Accessories | |
|
EGA Miniature Accelerometers | |
 |
EGAS Miniature DesignDC Response10,000 g Overrange StopsBroad Temperature Range |
 |
EGAS3 Miniature DesignDC Response10,000 g Overrange StopsBroad Temperature Range |
 |
EGAX/EGAXT Gas Damped, DC ResponseHermetically SealedmV Output10,000g Over-Range Protection |
|
EGAXT3 Series EGAXT3 Series Accelerometers | |
|
EGCS EGCS Series Accelerometers | |
 |
EGCS A2/B2 Miniature DesignDC Response10,000 g Overrange StopsHigh Sensitivity |
 |
EGCS-DO/D1S Rugged DesignDC Response10,000 g Overange StopsBroad Temperature Range |
 |
EGCS-S425 Range 50 to 2000 gFluid dampedInternally compensatedISO 6487 Compliant |
|
EGCS3 EGCS3 Series Accelerometers | |
|
EGCS3 Series EGCS3 Series Accelerometers | |
 |
EGCS3-D DC Response10,000 g Overange StopsHigh SensitivityShielded Cable |
|
EGM EGM Series Accelerometers | |
|
EGP EGP Series Accelerometers | |
 |
EGPE-1A IEPE Accelerometer+150°C Temperature PerformanceWide BandwidthHermetically Sealed |
 |
EGPE-1C Case Isolated IEPE AccelerometerIntegral Welded Strain Relief+150°C Operating TemperatureHermetically Sealed |
 |
EGPE-1D Case Insulated IEPE Accelerometer+150°C Temperature Performance44kHz Resonant FrequencyHermetically Sealed |
 |
EGPE-2A Charge Output AccelerometerHigh Temperature PerformanceWide BandwidthHermetically Sealed |
 |
EL20-S458 Low mass titanium design for use in high shock environments Mass optimized to minimize acceleration induced errors during SAE J2570 ATD testing Optional high level and linearized outputs Smoothed edge design and optional slotted titanium axles eliminate drag errors and dummy damage Ultra robust cable is user replaceable NIST traceable calibrations provided
|
 |
ELAF High immunity to off axis loads Low deflection design for fast response and high cycle life Optional external amplifier module NIST traceable calibration provided |
|
ELAF Low Profile Compression - Compact Size Entran low profile compression loadcells, high output (20mV/V) 500-50,000N | |
 |
ELFF High immunity to off axis loads Low deflection design for fast response and high cycle life Optional external amplifier module NIST traceable calibration provided |
|
ELFM Miniature Loadcell Entran tension, compression and universal in-line loadcells, 25-500N. High stability. | |
|
ELFS Miniature Loadcell Tension, compression and universal miniature loadcells. 10-500N. High output. | |
 |
ELHM Tension and compression or compression only High stability metal foil strain gage NIST traceable calibration provided |
 |
ELHS Tension and compression or compression only High output semiconductor strain gage NIST traceable calibration provided |
 |
ELPF High immunity to off axis loads Low deflection design for fast response and high cycle life Optional external amplifier module NIST traceable calibration provided |
 |
ELWF High immunity to off axis loads Low deflection design for fast response and high cycle life Optional external amplifier module NIST traceable calibration provided |
 |
EPB Miniature flush mountable Flush stainless steel diaphragm Flanged or non-flanged Bonded silicon gage High frequency response (to 400KHz) |
 |
EPB Pressure Sensor Entran small diameter pressure sensor with stainless steel diaphragm |
|
EPB Sub-Miniature Pressure Sensor EPB series of miniature sensors with stainless steel diaphragm. For static and dynamic measurements in cylindical format and flanged for straightforward mounting. | |
 |
EPE Low pressure High sensitivity Many housing styles
|
 |
EPHT/EPPT Integrated temperature Sensor High temperature Miniature design UltraStable™ Technology IP66 splash proof rated Titanium options |
 |
EPI
|
 |
EPIH Smallest 0.05” outside diameter High frequency to 1.7 MHz |
 |
EPL Miniature flush mountable Flush stainless steel diaphragm Flanged or non-flanged Bonded silicon gage High frequency response (to 400KHz) |
 |
EPRB High temperature Miniature design UltraStable™ Technology IP66 splash proof rated |
|
EPRB-1 Ultra Miniature Pressure Transducer, 100% Stainless Steel welded construction with amplified output, designed for severe environment where minimum size and weight are required. | |
 |
EPRB-2 Ultra Miniature Pressure Transducer, 100% Stainless Steel welded construction with amplified output, designed for severe environment where minimum size and weight are required. 5Vdc option. |
|
EPRB-3 Ultra Miniature Pressure Transducer with platinum RTD to sense media temperature, 100% Stainless Steel welded construction with amplified output, designed for severe environment where minimum size and weight are required. | |
|
EPRD Series Differential Pressure Sensors for autosport and other harsh environments. 65 and 80 mBAR air pressure sensors. | |
 |
EPX Mil-Aero, hydraulic pressure systems, air bag testing, air pressure systems, depth measurements, engine inlet and turbine, biomedical fluid sample analysis equipment |
 |
EPXN UltraStable™ long term stability Miniature threaded Recessed silicon diaphragm |
 |
EPXO Highest frequency response Dynamic & passive output High performance Miniature threaded Stainless steel flush diaphragm Bonded foil gage High frequency response (to 230KHz) |
 |
ESA SG1 Strain gauge tester and indicator High-performance test instrument for determining the quality, functionality and the parameters of strain gauge installations. The built-in signal conditioner/amplifier enables the offset of a gauge installation to be measured. |
 |
ESAM Traveller 1 Low Cost amplifier- and data acquisition system for static und dynamic signals. Practice- orientated, easy to operate software. Plug-in signal conditioner/amplifier modules for a multitude of sensors. |
 |
ESAM Traveller CF High-performance bridge amplifier- and data acquisition system for various application conditions, particularly, for use in dynamic measurements. Comes with a powerful, practice orientated, and easy to operate software package. Software expandable by high-performance optional additions. Signal conditioner/amplifier plug-in modules for a large variety of sensor inputs. For static as well as high-dynamic data acquisition. |
 |
ESAM Traveller Static Powerful amplifier- and data acquisition system for static und quasi-static signals. Practice-orientated, easy to operate software. Plug-in signal conditioner/amplifier modules for a multitude of sensors. |
 |
Encapsulated and Leaded Gauges - Polyimide A range of strain gauges suited to stress analysis applications. These are encapsulated gauges with a range of lead-out options. Linear, tee, and stacked rosettes are available. |
 |
Encapsulated-Leaded Gauges - Epoxy |
 |
FC22 Low cost button shape Essentially unlimited cycle life |
 |
FC23 Industry standard, low profile, all stainless steel design Resistant to off-axis loads |
 |
FPA - Fluid Properties Analyser The FPA givese real-time analysis of temperature, viscosity, density and dielectric constant of fuels and lubricants. |
 |
FS-IR infrared temperature sensor High accuracy non-contact temperature sensor for measuring brake temperatures to 200C |
 |
FS20 Load cell design operates at very low strains Not subject to lead die fatigue |
 |
FSA - NMB 5kg to 20kg. A low cost beam. A half-bridge design used in each of 4 corners of a platform scale. |
 |
FSU - NMB 0.5kg to 5kg. Low cost platform weighing load cell. |
 |
FX 1901-0001 Ultra low cost Low strain design: essentially unlimited cycle life |
 |
Finite Element Analysis Finite Element analysis is a very powerful design tool to allow stress modelling from a virtual design. The modelling will show stress levels, distribution and directions when applied skillfully. It is always recommended that actual strain data is taken from a component to verify the results. |
 |
Flame Spray Facility Facilities for flame spraying ceramic Rod (Rokide) ceramic powder and metal powder are available for installation of strain gauges, thermocouples and insulation coatings. |
 |
G Package Aluminum, 1 axis Type Inclinometer Range ±10° Unique Feature - Switch point adjustable- EMC standard- IP67 compliant Accuracy ± 0.25° Operating Temp -25° to 85°C Typical Apps Lift platforms, building devicecontrol, rail train observation,position switch Legacy Brand HLPlanar |
 |
GC Series PackageTIG welded 400 Series StainlessSteel TypeAC & DC Operated Range (inches)±.05, 0.125, 0.25, 0.5, 1.0, 2.0 Unique Feature - Voltage, Current and digitaloutputs- Hermetically sealed- Rugged construction- Air-extended option available Accuracy (%)0.1 to 0.25 linearity at 100%of range Operating Temp-55° to 150°C (AC);0° to 70° (DC) Typical AppsIn-process measurements, harshenvironments, areas exposedto dirt Legacy BrandSchaevitz |
 |
HC Series Package AISI-400 Series MagneticStainless Steel Type AC & DC Operated Range (inches) ±.05, 0.125, 0.25, 0.5, 1.0,2.0, 3.0, 5.0, 10 Unique Feature- Voltage, current anddigital outputs- Hermetically sealed- Welded housing- Double shielding- Intrinsic safety Accuracy (%) 0.1 to 0.25 linearity at100% of range Operating Temp -55° to 150°C -55° to 150°C (AC);0° to 70° (DC) Typical Apps Harsh environments,submersible, processcontrol, valve positionfeedback Legacy Brand Schaevitz |
|
HC485 Digisense Displacement Sensor The NEW HC485 DigiSense™ DisplacementSensor is available in seven bipolar measurementranges, with standard strokes from ± .050 inches to ±3.0 inches. Operating on a single ended 8.5 to 30.0 voltdc. input and a two-wire addressable RS-485 output,the HC485 is ideally suited to factory automationapplications. | |
|
HCA Series - Hermetically Sealed The HCA Series LVDTs are tungsten-inert gas (TIG) welded to form a hermetic seal that is impervious to dirt, water, steam and corrosive liquids and vapors. They feature a glass-sealed, MS-type connector, but do not permit throughbore operation. (A right angle version – HCARA series -– allows the core and core rod to pass through the unit.) All exposed surfaces are stainless steel, including the boreliner and connector shell. Units can withstand external pressure up to 1,000 psi (70 bars). Double magnetic shielding resists external magnetic influences. | |
|
HCA Series - Hermetically Sealed, Radial Connector HCA-RA right angle series LVDTs are tungsten-inert gas (TIG) welded for hermetic sealing with an easy to install radial connector termination. A design improvement to the standard HCA series, the HCA-RA has a through bore design and a right angle connection for applications where product length is an issue. The HCA-RA series can withstand up to 1000psi of external pressure. The through bore design stops debris from being trapped inside the body. The HCA-RA radial connector mount saves space not only in the unit length, but also in the mating connectorand cable bending radius. | |
|
HCD Series The HCD series LVDTs are impervious to dirt, water,steam spray and most corrosives. Tungsten inert gas (TIG)welding provides hermetic sealing that is free fromoxidation-producing faults that may cause leakage. Theyhave been qualified at pressures up to 1000 psi (70 bars)and are suitable for numerous high-pressure applications.They are terminated with a glass-sealed, MS-type terminalconnector. The connector prohibits the core from passingcompletely through the coil assembly. HCD units havedouble magnetic shielding that makes them insensitive toexternal magnetic influences. | |
 |
HFH Series HFH strain gauges are manufactured from Hoskins alloy and give excellent performance for measuring static strain at temperatures up to 700C when used in a half-bridge configuration |
 |
HFK Series Free filament strain gauges for elevated temperature static measurements to 650ºF (350ºC) |
 |
HFM Series Free filament strain gauges for high temperature vibratory testing. |
 |
HFN Series Free filament strain gauges for elevated temperature dynamic measurements |
 |
HFP Series Free filament strain gauges for high temperature dynamic testing and transducer applications. |
 |
HMI HMI panels can simplify the control of plant by making much of the operation intuitive on the schematic touch-panel display |
 |
HR Series The HR Series of LVDTs is highly reliability and is suitable for most general applications. The HR Series features a large core-to-bore clearance, high output voltage over a broad range of excitation frequencies, and a magnetic stainless steel case for electromagnetic and electrostatic shielding. |
 |
High Accuracy Piezoresistive OEM Pressure Transducer |
 |
KMT
|
 |
LBB Air Extend Series AC-operatedLinear Ball Bearing AssembliesRemovable Tungstend Carbide Contact Tipfor Long-term Reliability andInterchangeabilityDouble-shielded LVDT for Greater Protectionfrom Effects of Magnetic MaterialsPolyurethan-jacketed Cable EnhancesFlexibility and Improves Chemical ResistanceStandard Viton Boot for Greater Resistance toChemicals and High Temperatures |
 |
LBB Series Ultra-Precision PerformanceAC-OperatedUser-Adjustable Pretravel andOvertravel Settings0.315" (8 mm) or 0.375" (9.5 mm)Body DiameterPlain or Threaded HousingCalibration Certificate Supplied withEvery Gage HeadCompatible with All Schaevitz® SignalConditioners7 Connector Options |
 |
LC II - Calog The LC II is a unique hand-held loadcell tester, display and calibrator all in one product. |
 |
LCIT Series Linearity 0.25% of FS or betterCE-TBDIntegrated signal conditioningRugged stainless steel construction |
 |
LDM1000 Standard DIN Rail Mounting 10 To 30 Volt DC OperationVoltage And Current Output SignalsInternal Loop Drive2.5, 5.0 & 10.0 kHz Sensor ExcitationCompatible With Four, Five or Six-Wire LVDTs |
 |
LDTC Family Very low cost High sensitivity (1V/g) Ultra-low power (self generating) |
 |
LIM-420 The LIM-420 Module is a DC-powered LVDT and RVDT signal conditionerboard consisting of an oscillator, AC amplifier, demodulator, filter, DCamplifier and Voltage-Current conversion. |
 |
LSM-B - NMB 0.5kg to 100kg. Miniature compression load cell. |
 |
LT100 Depth Sensor The LT100 depth sensor is a submersible level transmitter in stainless steel for level measurement in vessels where pressure connection in the bottom of the vessel is not possible or desirable. For example pump pits, reservoirs or plastic tanks. HART communication and 4-20mA outputs are available. |
 |
LVM-110 The LVM-110 is a low-cost LVDT / RVDT signal conditioningboard, primarily designed for OEM process automationapplications. |
 |
Load Cell Amplifier Type 121/122 A compact high accuracy analogue amplifier with current or voltage output |
 |
M-13LP PC Board Mountable Pressure Sensor, 0-1 PSI, 0-100 mV Output, Temperature Compensated, Low Cost. |
|
M-13M The Model 13 is a temperature compensated, piezoresistive silicon pressure sensor packaged in TO-8 configurations. It provides excellent performance and long-term stability. | |
|
M-43M The Model 43 is a temperature compensated, piezoresistive silicon pressure sensor packaged in TO-8 configurations. It provides excellent performance and long-term stability. | |
|
M12 Series High Accuracy Low Cost The new M-12 series coil design has been optimized to provide the best possible temperature coefficient of sensitivity, while maintaining suitability for operation with extended cable lengths. A seamless 400 series stainless steel case provides magnetic shielding for the noisiest electrical environments. | |
 |
M51 00 Microfuse™ technology High perfomance at low cost Solid state reliability 1% total error band (-20 to 85C all possible errors combined) |
|
M86 Ultrastable 316L SS Pressure Sensor, Ultrastable Die for Long-Term Stability High Performance, Small Profile, 0-100 mV Output, Absolute and Gage Temperature Compensated. | |
 |
MHR Series The MHR Series of LVDTs is ideal for applications where excessive core weight could influence the motion of sensitive mechanisms. The lightweight core also helps minimize stresses and preserves the structural integrity of the core actuation assembly. High sensitivity results from close electrical coupling between coil and core. A magnetic stainless steel housing provides electromagnetic and electrostatic shielding. |
 |
MLS Pole pitches on request |
|
MP Series - Heavy Industrial The MP Series of LVDTs is suitable for heavy industrial use. Its coils are encapsulated in an anodized extruded aluminum housing, providing protection against electromagnetic and electrostatic interference. A heavy-duty terminal barrier strip replaces lead wires. A Teflon boreliner is standard equipment. | |
 |
MP2000 10 mm High Display Characters New Software Set-Up Menu Two Channels for the Price of One |
 |
MR-12 -±5V analogue output.-Sample rate 10k.-0.1% Accurancy.-0 to 20Nm |
 |
MR-SP02 Angle Sensor Voltage output 12C output Custom specific |
 |
MR174B, KMY, KMZ High sensitivity Low hysteresis |
 |
MS 32 High sensitivity Low hysteresis |
 |
MS5201, MS5201D, MS5212 Low cost |
 |
MS5401, MS5407, MS5412 Small Size 6.2 x 6.4mm Low cost Low drift High linearity or high sensitivity options Metal ring Can gel fi ll for humid conditions |
 |
MS5534, MS5535 15 bit-digital sensor Very low noise (±0.1 mbar) Software calibration and temperature compensation Pressure and temperature measurement (35 ms / meas.) Low power, low voltage (2.2 to 3.6V / <4/0.1ìA) No external components required Extended temperature range SMD ceramic carrier 9 x 9 mm |
 |
MS5536-PJU, MS5536-NJU 15 bit-differential digital sensor Software calibration and temperature compensation Pressure and temperature measurement(35 ms / meas.) Low power, low voltage (2.2 to 3.6V / 5ìA) No external components required Small SMD ceramic carrier 13.3x10.1 mm |
 |
MS5540, MS5541 16 bit-digital sensor Very low noise (±0.1 mbar) Software calibration and temperature compensation Pressure and temperature measurement (35 ms /meas.) Low power, low voltage (2.2 to 3.6V / <4/0.1ìA) No external components required Small SMD ceramic carrier 6.2x6.4 mm Gel provides water protection |
 |
MSP300, M340 Microfuse™ technology High reliability at low cost Highly customized for OEM applications Small size Solid state reliability Various total error band choices 1% thru 4.5% typical (all possible errors combined) |
 |
MSP800 Microfuse™ technology In-line temperature probe Digitally compensated for high accuracy over broad temperature range |
 |
Miniature Load Cell Amplifier A range of miniature amplifiers available as a basic board or as a packaged item. |
|
Model 1201 Model 1201 Accelerometers | |
 |
Model 1201F DC ResponseDurable CableReliable PerformanceLow Cost |
 |
Model 1202 DC ResponseDurable CableReliable PerformanceSelf Test |
 |
Model 1202F DC ResponseDurable CableReliable PerformanceSelf Test |
 |
Model 1203 DC ResponseDurable CableReliable PerformanceLow Cost |
 |
Model 1210 Temperature compensated Current excitation |
|
Model 1210M Model 1210M Medium Pressure Accelerometers | |
 |
Model 1220 Temperature compensated Voltage excitation |
 |
Model 1230 Temperature compensated High performance UltraStable die Current excitation |
 |
Model 1240 Temperature compensated High performance UltraStable die Voltage excitation |
 |
Model 13 Temperature compensated Can gel fill for humid conditions |
 |
Model 1451 Low cost Can gel fill for humid conditions Tube or hole |
 |
Model 1471 Low cost Coarse calibrated at room temp Can gel fill for humid conditions Tube or hole |
 |
Model 17 Temperature compensated High performance UltraStable die Can gel fill for humid conditions |
 |
Model 23 Temperature compensated Can gel fill for humid conditions |
 |
Model 27 Temperature compensated High performance UltraStable die Can gel fill for humid conditions |
 |
Model 3022 Piezoresistive MEMSPC Board Mountable AccelerometerMillivolt OutputLow Cost |
 |
Model 3028 Piezoresistive MEMS, DC ResponseMillivolt OutputLow Cost |
 |
Model 3031 SMD AccelerometerMiniature DC ResponsePiezoresistive MEMS10,000g Over-Range Protection |
 |
Model 3038 MiniaturePiezoresistive MEMSSMD AccelerometerHermetically Sealed |
 |
Model 3052 PC Board MountableMillivolt OutputIntegral Temperature Compensation |
 |
Model 3058 Piezoresistive MEMS, DC ResponseMillivolt OutputIntegral Temperature Compensation |
 |
Model 3255 PC Board Mountable Accelerometer0.5 to 4.5 VDC OutputIntegral Temperature Compensated10,000g Over-Range Protection |
 |
Model 33 Temperature compensated Can gel fill for humid conditions |
 |
Model 37 Temperature compensated High performance UltraStable die Can gel fill for humid conditions |
 |
Model 3700 Shock & Impact TestingPiezoresistive MEMSmV OutputDC Response |
 |
Model 3801A Gas Damped, DC ResponseHermetically SealedmV Output10,000g Over-Range Protection |
 |
Model 4000A Piezoresistive MEMS AccelerometerSignal Conditioned OutputTemperature CalibratedLow Cost, Lightweight |
 |
Model 4001A Piezoresistive MEMS AccelerometerSignal Conditioned OutputTemperature CalibratedLow Cost, Lightweight |
 |
Model 43 Temperature compensated Can gel fill for humid conditions |
 |
Model 4415 Temperature compensated Low pressure Voltage excitation |
 |
Model 4416 Temperature compensated Low pressure Voltage excitation |
 |
Model 4425 Temperature compensated High performance UltraStable die Voltage excitation |
 |
Model 4426 Temperature compensated High performance UltraStable die Voltage excitation |
|
Model 4501 Model 4501 Accelerometers | |
 |
Model 4503 SMT Mount AccelerometerPiezoresistive MEMSSignal Conditioned AccelerometerLow Noise, High Resolution |
 |
Model 4600 Advanced temperature compensationHermetically SealedHigh SensitivityMEMS Accelerometer |
 |
Model 4602 -54°C to +121°C Operating RangeHermetically SealedHigh SensitivityMEMS Accelerometer |
 |
Model 4610 High Performance DC ResponseLow NoiseAdvanced Temperature Compensation10,000g Over-Range Protection |
 |
Model 4620 Gas Damped, DC ResponseHigh SensitivityAdvanced Temperature CompensationHigh Over Range ProtectionMEMS Accelerometer |
 |
Model 4621 Signal Conditioned, Amplified OutputLow Noise, High SensitivityAdvanced Thermal CompensationHigh Over Range Protection |
 |
Model 4630 MEMS Triaxial AccelerometerDC ResponseAccurate Temperature CompensationSignal Conditioned Output10,000g Over-Range Protection |
 |
Model 4655 SMT Mount AccelerometerPiezoresistive MEMSTemperature CalibratedHermetically Sealed |
 |
Model 47 Temperature compensated High performance UltraStable die Can gel fill for humid conditions |
 |
Model 4801A Amplified, Signal ConditionedHermetically SealedDetachable Cable10,000g Over-Range Protection |
 |
Model 50 Low cost Solid state reliability Good for through hole Can gel fill for humid conditions |
 |
Model 52 DC ResponseMiniatureLow CostReliable Performance |
 |
Model 53 DC ResponseLow CostReliable PerformanceLow Profile |
 |
Model 61 DC ResponseDurable CableSmall PackageReliable Performance |
 |
Model 62 DC ResponseDurable CableSmall PackageReliable Performance |
 |
Model 63 DC ResponseDurable CableReliable PerformanceLow Cost |
 |
Model 64 DC ResponseDurable CableSmall PackageReliable Performance |
 |
Model 64B DC ResponseDurable CableSmall PackageReliable Performance |
 |
Model 64C DC ResponseDurable CableSmall PackageReliable Performance |
 |
Model 68C DC ResponseDurable CableReliable PerformanceLow Cost |
|
Multi-Channel Rotary Telemetry Systems | |
 |
NMB Strain Gauges StrainSense Limited has recently become the EU distributor of the NMB brand of foil strain gauges. These gauges are ideal for high quality transducer manufacture. |
 |
NS-45/P2 Dual Axis Inclinometer The NS-45/P2 dual-axis inclinometer is a member of afamily of high performance, competitively priced, singleand dual-axis inclinometers. |
 |
NS403B A range of plastic-melt transducers, the sensor is remote from the electronics allowing for measurements up to 300C. |
 |
OEM Force Catalogue A range of miniature loadcells for OEM applications. |
|
P1 S4 | |
 |
P900, P981, P1200, P700, P9000 High overpressure & shock rated (10x over pressure) Shock & vibration resistant Heavy industrial grade transducer (P9000) Advanced digital compensation/calibration Mechanical overpressure stops High temperature operation |
 |
PAK-II PAK Mobil MK II is our compact mobile multi-channel measuring system for vibration-technological and acoustic analysis - a measuring front end for the most exacting user. It can be universally configured for any common measurement pickups and is easy to adapt to the task at hand. This reduces the effort required, speeds up your project, and minimizes your cost. |
 |
PCA 375 Series Small Diameter 0.375” Form FactorIP-65 Cable ExitHeavy Duty Return SpringAccepts Industry StandardContact Tips2.5 to 10.0 kHz Excitation |
 |
PML 1000 5 Digit Display90 to 265 VAC OperationVoltage and Current OutputsCompatible with All Schaevitz® Standard LVDTs and RVDTs Low Voltage Operation |
|
PRECISE Advantages 20 reasons why the PRECISE is the best transmitter in the World | |
 |
PRECISE Depth Sensor High accuracy depth measurement to 10,000m with resolution to 0.01m. Temperature measurement included. |
|
PRECISE Presentation See the background and technology that makes the PRECISE transmitter a class leading product. | |
 |
PS-C11M Rugged 11mm diameter linear potentiometer designed to withstand harsh industrial applications. Life to 25M cycles, temperatures to 150C. Static sealing to IP67, stroke lengths 25-150mm. |
 |
PS-C15 The PS-C15 series of Linear Potentiometers are designed to provide linear measurement solutions for a variety of industrial applications. Using proven ‘conductive plastic’ technology, the sensors offer high performance and reliability. |
 |
PS-C95P Small diameter (9.5mm) designed for autosport, combining robust design for temperatures to 150C, static sealing to IP67 and fitted with Pop Joints for quick fitting and removal. Repeatability of 0.01mm. 12.5-150mm stroke lengths. |
 |
PSD 704 |
 |
PT60 Pressure and Differential Pressure Range Electronic transmitter with a wide range of process connections. Stainless steel housing with hygienic design. |
 |
PT9 Low cost pressure transmitter PT9 Low cost pressure transmitter |
 |
Piezo Cable Continuous lengths to 1km Shielded construction Very low cost |
 |
Piezo Film Piezoelectric Film is an enabling transducer technology with unique capabilities. Piezo Film produces voltage in proportional to compressive or tensile mechanical stress or strain, making it an ideal dynamic strain gage. It makes a highly reliable, low-cost vibration sensor, accelerometer or dynamic switch element. Piezo Film is also ideally suited for high fidelity transducers operating throughout the high audio (>1kHz) and ultrasonic (up to 100MHz) ranges. |
|
Piezo Film Catalogue Catalogue showing the range of piezo film sensors for dynamic measurements. | |
 |
Pressure - NMB 200kPa to 100MPa. Industrial instrumentation sensors. Under construction. |
|
R120LC Series The R120LC Series is a DC operated noncontactrotary transducer. | |
 |
R30A
|
|
R30A/R36AS +/-30deg. RVDTs incorporate a proprietary noncontact design that dramatically improves long term reliability when compared to other traditional rotary devices such as syncros, resolvers and potentiometers. This unique design eliminates assemblies that degrade over time, such as slip rings, rotor windings, contact brushes and wipers, without sacrificing accuracy. High reliability and performance are achieved through the use of a specially shaped rotor and wound coil that together simulates the linear displacement of a Linear Variable Differential Transformer (LVDT). Rotational movement of the rotor shaft results in a linear change in the output signal, directly proportional to change in shaft angle, over +/-60 degrees from the null position. The phase of this output signal indicates the direction of displacement from the null point. Noncontact electromagnetic coupling of the rotor provides infinite resolution, thus enabling absolute measurements to a fraction of a degree. | |
|
R30D The R30D RVDT is a DC operated noncontactingrotary transducer. Integrated signal conditioningenables the R30D to operate from a bipolar ±15 VDCsource with a high level DC output that isproportional to the full range of the device. | |
 |
R60D Aluminium case size 11 servo mount with ball bearing |
|
RSYN - Hostile Environments RSYN angular position sensors are noncontact transducers that incorporate proprietary rotor and coil designs. Their basic construction eliminates items such as slip rings, rotor windings, contact brushes or wipers that degrade over time and impair reliability. At the same time the coil design achieves extraordinarily high output and low noise. RSYNs offer enhanced tolerance to shock and vibration. Shock survival to 30g with an 11 ms half-sine form and vibration tolerance to 20g over 15 to 2000 Hz make these transducers the obvious choice where severe conditions are expected. RSYNs are also resistant to humidity and salt mist. Excellent performance over a temperature range of -67° to 221°F (-55° to 105 °C) provides a significant advantage over comparable rotary sensors. | |
|
RVIT-15-60/RVIT-15-120I The RVIT-15-60 and RVIT-15-120I rotary transducersare available in a variety of versions which providea range of supply and output configurations. | |
 |
RVIT-Z OEM Modular Design |
 |
RapidSense Fully encapsulated and leaded gauges for ease of installation. |
 |
Rope Clamp-On Load Cell |
 |
SGA-0B Signal conditioner card High-performance analog signal conditioner/amplifier with very high analog bandwidth and gain. Applicable as 1-channel stand-alone or multichannel system. Control of all parameters via USB-port and easy to operate software. |
 |
SLC Shackle Load Cell Shackle loadcells are often used to replace existing shackles at rope ends etc to measure the tension. |
|
See Crane Scales in the Webstore For hanging scales and on-hook weighers up to 10te capacity please click | |
|
StrainSense Shortform catalogue A 4-page brochure covering the general ranges of products available from StrainSense. | |
 |
T211 A low cost universal input digital panel meter for single transducers, thermocouple, RTD, current and voltage input. |
 |
T220 Thermocouple, RTD, 20mA,100mV, 10V and resistance input.Temperature C or F; scaling in engineering units for process inputs.5 digit red LED, (green option)10V & 24V excitation and loop supply outputsDual relay outputsHidden configuration buttonsIsolated 0-10V/4-20mA analogue output optionZero, Tare, Max/Min maths functions24 point linearisation |
 |
T240 A versatile panel meter designed for multiple transducer inputs, eg platform or process weighing systems. With linearity correction, trip points, analogue and digital outputs. For weighing and batch control. |
 |
T290 A large digit display for industrial environments.Three colour display to show when trip levels are reached. |
 |
T321 Data acquisition and signal conditioner with universal input |
 |
T331 PID controller/dual trip amplifier |
 |
T332 PID controller/Signal conditioner/Trip amplifier |
 |
T340 Logic expansion module |
 |
T3B1- NMB 100kg to 5te. Universal high accuracy loadcell. |
|
TS-NTC1 Fluid temperature sensor An accurate small thermistor for fluid temperature measurement. | |
 |
Tilt Car Alarm Immune to false alarms due to...WindPassing VehiclesPassing AircraftDeliberate Heavy RockingTemperature Changes <25°C/hr |
|
Torque Speed and Power Indicator 370 | |
 |
Tracker 200 Series 1/8th DIN Panel Meter Range The Tracker 200 series of digital panel meters can be used for the display and alarm for most of the sensors offered by StrainSense, the series also offers counters, voltmeters, current meters, temperature display and much more. |
 |
U2D1 - NMB 3kg to 100 kg. Loadcell for platform weighing, especially large platform. |
 |
U5100 UltraStable™ technology High Performance at a low cost Solid state reliability Less error than competing technologies 0.75% Total error band (-20° to 85°C all possible errors combined) 0.5% max 0.25% typical total error band available for instrument grade |
 |
UL - NMB 2g to 100g. Very low universal force measurement. |
 |
US300 UltraStable™ technology High reliability at low cost Highly customized for OEM applications Small size Solid state reliability Various total error band choices 0.75% thru 3% typical (all possible errors combined) |
 |
UT - NMB 100g to 2 kg. Low universal force measurement. |
|
Universal Analog Measurement Module The e.bloxx series is designed for industrial and experimental test systemsrequiring precise high speed measurement of electrical, thermal, andmechanical quantities in engine and component test beds. | |
|
Vibration Handbook A handbook covering a wide range of terms, equations and conversion factors for force, vibration and pressure. | |
 |
Weldable High Temperature Weldable high temperature strain gauges for 300ºC static measurements and 800ºC dynamic measurements. |
 |
Weldable Strain Gauges and Temperature Sensors For ambient temperature range -40ºF to 180ºF |
 |
Weldable Strain Transducers Full bridge configuration, fully packaged for straightforward installation. |
 |
XS-B Series The XS-B Series was designed for micro applications. It is particularly well suited for multi-point measurement of small components. Core weight is virtually negligible. Manufacturing requires extremely sophisticated assembly techniques. Coils arewound from hair-thin wire. Lead-wire bonding and other exacting operations are performed by highly skilled specialists with binocular microscopes. Housing provides magnetic shielding. |
 |
XS-C Series The XS-C Series satisfies those applications involving measurement and control in pressure-sealed chambers, e.g., hydraulic actuators and pressure vessels where bulkhead mounting is permitted. It is a sealed, heavy-walled LVDT suitable for operating pressures up to 3000 psi (210 bars), and proof pressures up to 4500 psi (315 bars). The XS–C’s TIG-welded stainless steel housing is highly resistant to corrosive environments. Internal magnetic and electrostatic shielding render the XS–C insensitive to external magnetic influences. |
|
XS-D Series - Large Displacements The XS-D Series is particularly well suited for measuring relatively large displacements, but where installation space is limited. The XS–D has a substantially greater displacement range than standard LVDTs but without the accompanying increase in body length and weight. Special winding techniques permit linear range measurements up to 80 percent of the XS–D’s housing length. The LVDT, being a contactless device, experiences no wear whatsoever. The 400 series stainless steel housing provides magnetic shielding. | |
 |
e.bloxx The e.bloxx series is designed for industrial and experimental test systemsrequiring precise high speed measurement of electrical, thermal andmechanical quantities in engine- and component test beds. Sample rates up to 1000 Hz andresolutions up to 19 bit are possible depending on the module and signaltype used. Standardized communication protocols (Profibus-DP andModbus-RTU) allow the e.bloxx family to work with a wide variety ofapplication hardware and software. |
 |
e.rack A6-16 Slimline The e.rack slimline is a low profile rack mount design, and easily connects to the wide variety of field devices used in today's test beds. Sample rates up to 1000 Hz and resolutions up to 19 bit are possible depending on the unit and signal type used. Standardized communication protocols (Profibus-DP and Modbus-RTU) allow the e.rack slimline family to work with a wide variety of application hardware and software (including e.bloxx). |
 |
89 High pressure |
 |
9008 ALPHA 1 TRI-COLOR BARGRAPH SYSTEMS. The ultimate in tri-color bargraph technology. New Alpha 1 Tri-Color Bargraph System uses color as never before…to organize, communicate, and coordinate with clarity. |
